HT5022 Why doesn't this Airport Utility 5.6 work with Mountain Lion 10.8?

Tried to install 5.6 and at the select a destinationfor the Air Port Utility 5.6 software was advised that the version of MacOS X (10.8 Mountain Lion) is not supported. Is there a solution to this problem or has a software update rendered my old Airport Express redundant??

Does anyone know if Airport Utility 5.6 running in OS X 10.8.4 can adjust the wireless transmit power level on the new Airport Extreme 802.11ac?
It cannot.
It might appear as if the change was made in 5.6.......but once you close 5.6 and open 6.3.1.....then open 5.6 again, you will see that the Transmit Power has reverted back to 100%.
Same thing for Radio Mode. It might appear as if you can change the Radio Mode in 5.6.....but it won't "stick". The setting will revert back to Automatic.
I think the bottom line here is that if you don't see the setting that you want to change in 6.3.1.....then trying to change it in 5.6 will not work. So, you might as well use 6.3.1 with the new Time Capsule and new AirPort Extreme.
I don't think 5.6 will hurt anything....it just won't do any good.

Similar Messages

HP Scan utility no longer works with Mountain Lion

Updated from 10.6.8 to 10.8. HP Scan software utility no longer boots, yielding an error message warning of incompatibility. I run Software Update over and over again, but HP Scan still did not boot.
I ran HP Uninstaller, but it did not remove the HP folder within Applications. So I deleted HP Scan and other utilities manually.
I ran Software Update again, and it re-downloaded and re-installed HP Printer Software Update 2.11. However, it did not install the HP Scan utility. Now I can only scan using the Printer/Fax System Preference or Image Capture, whereas the HP Scan utilility had much more functionality.
Apparently HP Scan is only part of HP's Full Software Install. However, Mountain Lion ONLY allows the use of Software Update for printers, and there is nowhere on the HP website to download the HP Scan utility or Full Software for Mountain Lion -- they only instruct one to use Apple's Software Update which doesn't provide any HP utilities.
Where can I find the HP Scan utility (for PSC 1610) that is compatible with 10.8? It certainly is not available from HP -- see:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=390315
Thanks.

Please be so kind to help me. HP wanted 30 USD to help me. Why should I pay 30 USD to HP when their new integrated software update does not work?
Had my HP Photosmart Premium C410b for a bit over a year. Worked like a charm in 10.6 and 10.7. I am a frequent user of the HP scan software. I am fully aware that I can use the system pref - > print&scan -> open scanner, BUT that is like going back in time to windows 3.1 days. Try scanning 20 pdf's a day, especially when 2 or more pages in one pdf, add to the equation that My Acrobat X is no longer accepting the scanner either, I can print, but I can't scan, and then I guess we'll agree that the integrated apple scan solution is nothing sort of a emergency solution. I need my HP software!
I downloaded the Lion software file
HP_Lion_Ink_SW_v12.13.14.dmg [1/1, 194.96M]
But to no use. Only get the message that it is for 10.7 or older.
HP claim that all I need to do is to go to Apple -> Software update and gte the software for my HP printer. I just get the message "No updates available". Can't find the software if I search for it.
I don't know how I found it but from apple's pages I found a 460MB file called HewlettPackardPrint2.12.dmg as one forum suggested it to another persons with same problems. When installing I think it said to take 1GB of space. I still don't know what I installed since I see no software anywhere and nothing changed. Maybe a bunch of drivers for all HP printers ever made? Don't have a clue...
All I want is just that HP scan software so I can go back to my normal workday but it seems so impossible. I really hope someone can help me. Anyone have anything to help me one step closer I sure would appreciate it. I need my HP scan software and Acrobat to work.
Second option is buying a new printer. That's just sad if it comes to that...

Older model Airport Express won't work with Mountain Lion Airport Utility

just upgraded to Mountain Lion and noticed that of my network of three airport expresses connected to various stereo speaker systems throughout the house, one of the older models won't work with the supplied version of Airport Utility (v 6.1). Here is the message it gives in the utility when I attempt to select this particular Airport Express:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
Well, I go to download v 5.6 and none of the versions available will install on Mountain Lion! (even the version for Lion) Catch 22.
Any resolution to this (other than having to go out and buy a newer version Airport Express)?
Michael

Learn how to install AirPort Utility 5.6 on Mountain Lion here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

HT5022 What works with Mountain Lion? AirPort Utility 5.6 will not install on Mountain Lion.

What gives? The AirPort Utility 5.6 wil not load on a computer running Mountain Lion. Attempted both on an iMac and Macbook.

That is correct, the 5.6 version of the AirPort Utility will not install under Mountain Lion ... but it will run on it once installed. One option is to use a utility, like Pacifist, to extract and "install" the utility into the Utilities folder.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Can someone tell me why Apple cannot produce a Scabble game that works on Mountain Lion. So frustrated that this is not happening with all the technology available.

Can someone tell me why Apple cannot produce a Scabble game that works on Mountain Lion. So frustrated that this is not happening with all the technology available.

The only companies that can make a Scrabble game are the companies that own the rights to the game; Hasbro owns the rights in the US & Canada, Mattel owns the rights outside of the US & Canada.
You need to be speaking to those two companies.

Why does snaps pro not work with mountain lion?

I spent a lot money purchasing the pro addition only to be told that it won't work with mountain lion due to Apple's written something into the code that does not permit me to make videos with it. I even tried ot make a video of Indesign acting up so i could send it to Adobe support and it wouldn't allow me to. Is this the resaon it suddenly doesn't work anymore? Are there plans to fix mountian lion to allow me to use my software? Alternatively,, does Apple have something that does screen captures of videos?

this is the repsonse form Ambrosia: (Not sure I understand it)
As far as Snapz Pro X 2 functionality, some major backend Digital Rights Management changes enacted by Apple may be what is preventing you from recording movies you were previously able to record using our software. Basically, our program can no longer access videos before the DRM protections are enabled, unfortunately we have no control over these changes. Please see the following FAQ:http://www.ambrosiasw.com/support/faqs/products/snapz-pro-x /Why-does-the-content-of-my-capture-display-as-a-checkerboard
BTW I am current on the latgest version.
Does anybody know how to work around my problem? I need to be able to record videos on my computer.

Why won't my secure thumb drive (FAT32) work with os lion?

Why won't my secure thumb drive (FAT32) work with os lion? I have used it ok with older mac operating systems. When the thumb drive is inserted in the usb port, an error message appears stating that the disk was not ejected properly. It shows as readonly in Finder. When I try to eject it, the spinning wheel appears and I have to relaunch finder.

Hi princessmonsta,
Thanks for using Apple Support Communities. This article has some information on things to check if your sound is not working as expected that may help:
OS X Mavericks: Adjust your computer’s sound output
http://support.apple.com/kb/PH13908
Cheers,
- Ari

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

HT200160 This solution does not seem to work when I upgraded from OS X 10.6 to OS X 10.8 (Mountain Lion). I've tried all versions of this. Any suggestions specific to getting this to work with Mountain Lion?

Any suggestions for making this work with Mountain Lion? I've tried all similar solutions on web. I've been able to get this to work with Lion, and after upgrading to Mountain Lion it seems to hold true (doesn't make me implement again). But when I went from OSX 10.6 to Mountain Lion and have to implement it on 10.8 - it isn't working. Thanks.

Any suggestions for making this work with Mountain Lion? I've tried all similar solutions on web. I've been able to get this to work with Lion, and after upgrading to Mountain Lion it seems to hold true (doesn't make me implement again). But when I went from OSX 10.6 to Mountain Lion and have to implement it on 10.8 - it isn't working. Thanks.

HP Digital Filing function doesn't work with Mountain Lion....?!

My HP Officejet L7780 is an All-in-One with a fabulous feature of Direct Digital Filing allowing us to do a digital scan and filing into a folder on my Mac. It is operated entirely from the printer by a single button.
It works perfectly on my MBP with Snow Leopard.
On my new MBP with Mountain Lion this function does not work - (the printer cannot find the computer, or says it is not turned on or it is not accessible..) Applecare cannot explain it - the Apple Genius does not know how to fix it - HP washes their hands saying the printer is no longer Supported.....
I have a perfectly good printer/scanner/copier/fax - and i can still call a scan from my computer - but i can no longer send a file from the printer.
I've done all the software downloads, uninstalled and reinstalled all the MAC-OS and Printer software, 3 times - looked throughout the HP website for udpate drivers to work with OS10.8
Does anyone know how to fix it, please ?

Hi ShlomiL,
Thanks - i'm sure your answer is correct, it is totally consistent with the observed facts. but i ask myself WHY, oh WHY does Apple do such a short-sighted move to cut off legacy apps or legacy hardware forcing people either to not adopt their latest hardware/software, or waste totally good office equipment which is still perfectly workable.
As luck would have it, i have an MBP with OS10.6 for my business - i can do a Direct Digital file scan to it perfectly OK but my new Retina MBP which i use for all my personal finances, taxes etc is the one i want to use with the printer, at home.
I can get stuff from the scanner to my home MBP but have to do that poor workaround - and i refuse to be forced to trash a perfectly good 4 year old printer just to please some software re-designer.
Is there a work-around (hack ?) where i can download the old SMB file/driver into Mountain Lion and replace the SMBX version which comes with the new OS, please ?

HT5444 mac pro 2007 and later doesn't work with mountain lion

how do i downgrade back to a later version since lion or mountain lion dose not work with my pro tool 10 version?

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
      loads select your language and click on the Continue
      button. When the menu bar appears select Disk Utility from the
      Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status
      of the drive in DU's status area. If it does not say "Verified" then
      the drive is failing or has failed and will need replacing. SMART
      info will not be reported on external drives. Otherwise, click on
      the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
      from the drop down menu to one. Set the format type to Mac OS
      Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on
      the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.

Why do applications keep crashing on MacBook Pro i7 with mountain lion

I am using a late-2011 MacBook Pro with Mountain Lion OS 10.8 and 8GB of RAM.
The system keeps having iTunes, and most recently Skype, crash while in use.
This never happened previously, and I am puzzled.
Any thoughts?

Did you upgraded from Lion or Snow Leopard?
Sometimes it's better to do a clean install: http://tinyurl.com/bmbkgrm
Goodbye

Airport Express doesn't work with Mountain Lion

I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers.
Not only that... but the airport utility doesn't support my airport express.
Time Machine doesn't work either....
I want my snow leopard back!!!
Any insight????

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

Newer mac mini airport utility can't work with older airport express

Hi anyone who can help me out.
I have a relatively new mac mini (2012), and a much older airport express. I can accesss the internet no problem, but I cannot use the airport utility to chane the password on the airport expres. when I try, I get this message "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." I have the latest version of Airport utility (6.3.1), which is supposed to work with all generaions of airport express. I need to change the password, but I do not have any of the original set-up disks for the airport. How do I fix this?
Thanks for your help.
liametmanu

Unfortunately, AirPort Utility in Lion and Mountain Lion no longer supports the older wireless "b/g" versions of the AirPort Express. This would include model numbers A1084 and A1088.
Please locate the model number on the side of your AirPort Express devices to verify the version that you have.
If you have another Mac running the Leopard or Snow Leopard operating system, you can use AirPort Utilty on that Mac to administer the older Express. A PC could be used as well.
If you cannot use another Mac or PC, then you might want to consider trying an unsupported method to install an older version of AirPort Utility on your Mountain Lion Mac. No guarantees can be offered that this will be successful since Apple does not officially support this method, but it does seem to work for most users.
See this thread for more details:
https://discussions.apple.com/message/22940547#22940547
If nothing seems to work, the final option....likely the one that Apple wants you to use.....would be to buy a new AirPort Express.

HT5022 Why doesn't this Airport Utility 5.6 work with Mountain Lion 10.8?

Similar Messages

Maybe you are looking for