HT5037 Hello! I hoping you can assist - I followed the instructions and I'm still not able to access my photos
Could you please assist
Start with version of iPhoto and of the OS and details of the problem like error messages, what happenes, exactly why you can not access yoru photos - we know nothing about your system except what you tell us - and at this time that is virtually nothing except tha tyou have a problem
LN
Similar Messages
-
I have an itunes account to update the office ipad. Now we have more of them can my colleagues access my itunes account including the apps to update their ipads with? it seems silly for everyone to have a seperate account and purchase apps that i have already bought. We just want to share and update one account that everyone can use and access from their own pc.
Unless I am missing the point here - or in the event that there are different terms and conditions for the use of iPad in the Enterprise with regard to iTunes purchases - once you have purchased an app - you are free to download that app again - at no charge - to as many iDevices as you desire - as long as you are using the same Apple ID and iTunes account that you used to make the original purchase.
So the short answer to the question - IMHO - is Yes! My wife, my daughter and I share one iTunes account and we download apps onto four different iDevices - and only pay for the apps once. The purchases are tied to the Apple/iTunes account and not to the PC or the iDevice.
The only caveat to this point is - I have no idea how Apple handles purchase for businesses meaning that I don't know if businesses are subject to the same terms and conditions as we "everyday" users.
Maybe the company could set up one iTunes account and you could all share from there but I still don't see why this can't be done. However, that is why I suggest that this question might be better served being posted in the iPad in the Enterprise section of the ASC. -
Hi!
I'm trying to change from a Swiss itunes store to a us one, as I now live in the us. I made all necessary changes in ma itunes profile, incl us credit vard, but it still does not allow me to access the us store. can anyone help?
hanks!Created a new Apple ID using a US email account. Get a US charge card from a US bank with a US billing address. Create a new iTunes account using the new Apple ID, credit card, and billing address.
If you then wish to switch between your two accounts:
Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com. -
Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank youPages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry -
I have used Firefox for over a year. For some reason it quit working and I can't seem to fix it. I uninstalled and reinstalled the download and it's still not working. When I click on the icon it says unable to connect.
Yes, if you repurchase it you may lose your progress. The exception would be a game that stored all your progress on a server under your ID
If you want to retain your progress you have two choices:
1. Don't apply the update.
2. Use your fathers account password to update the game. -
Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded. I just ran the update and it is still not fixed. What can I do??? My plug are asking me to re-register them too. This is annoying. Please help!!!!!
How do you try to start the repair dialogue? By starting Aperture or by opening the Library?
If you not already have tried it with directly opening the library:
reveal your Aperture Library in the Finder
Whilst holding down Command(⌘)- option (⌥) double click on the Aperture Library.
Select "repair library" from the dialogue.
What about Frank Caggiano's questions above?
It would be really helpful to know, how many libraries you have, and if this problem is restricted to one of them. -
I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???
Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.
-
My WiFi signal is good but I can't connect to the Internet and it's still loading the server
My WiFi signal is good but I can't connect to the Internet and it's still loading the server. How can I fix this or make the server connect faster?
try:
iOS: Troubleshooting Wi-Fi networks and connections -
i am getting a message on my ipad2, i was playing frogger pinball and and the front says story, challenge, add and store next to store it has a leaf with 3 people icons i clicked on that, and i am getting a message that says i hit game center on the bottom the message reads game center is currently disabled. you can change this in the settings menu I have gone to the settings menu but I am not clear as to were to fix the program.
i got your response and i went to the restrictions, and I have gone to game center on the bottom it says multiplayer game on adding friends on, i have tried to turn it off and it wont let me, first shoul i try to shut it off and 2nd do you know why it might not be letting me do so it i should be
-
If I am working on a document and happen to run a heading and body copy as follows
Australian maritime history. The story of Australia etc
or if I type as following:
Australian maritime history.
The story of Australia etc
THEN if I go back to the document and I want to move the 'The story of' section to the next line... and hit 'return' it leaves a line space under that headline.
Ditto... if I go back to the second example and make the headiline 'bold' it once again leaves a line space.
Office was easy to correct as you simply highlighted the space and deleted.
not so in Pages..... the line spacing % bar (under inspector) does not allow for such correction... instead it crunches up the body copy of the paragraph.
I assume it is some default setting - but where and how?
Thanks
WarrenHard to follow what you are saying, but if you are using styles they all have their own formats.
Can you point us to the specfic template you are using? Or show us a screen snap (command shift 4) of the issue.
It does sound like one of the styles either has a space before or after the paragraph or a combination of the two:
Inspector > Text > Text > Before/After Paragraph
This exists in Ms Word as well.
Peter -
You guys helped me diagnose, now I'm hoping you can help me with the fix!
I found out through the help of this forum that the hard drive in my original G5 iMac had failed. I ordered a new Serial ATA hard drive (Seagate Barracuda) and installed it without incident. The thermal sensor assembly (which I have read is a big issue a lot of times) was not damaged in the process, and the thing all went in and went back together very smoothly. However, when I started the machine up (booting from a FW DVD drive with the original OS install disc that came with the machine) and got to the part in the OSX installation process where it asked for me to select a destination drive for the install, it did not give me any options from which to choose. As in, it seemed not to see that the drive was there.
I called a local friend who is more knowledgeable than I and asked if he had any suggestions, and he suggested that I check the jumpers. After a ridiculous amount of searching, I found that the 4-pin jumper assembly on my new drive seems only to have one purpose, and that is to choose to limit the speed of communication between the drive and the mainboard if necessary. The indicated jumpers were already shunted when I unwrapped the drive, so I pulled the shunt and tried again, with the same result. I'm out of ideas. Any help would be grand.Hi huffdog,
When you go to Disk Utility, with the hard drive highlighted, down the bottom it should tell you what "partition scheme" is in use. "GUID" is for booting Intel Macs, "Apple partition scheme" is for PPC macs, like the iMac G5, Master Boot record is for PC's.
If you have the wrong "partition scheme" showing, then you will need to re-partition and reformat the drive.
To change it you go to the partition tab. Look below the diagram of the partition and you should see an "options" button. If it is greyed out you will need to select a scheme from the drop down menu (just choose "1 partition" again if that is what you wanted). The "options" button should now be available. Click on it and you will be able to select between the three "schemes" I mentioned above. Choose "Apple partition Scheme.
If you have the wrong partition scheme, even if you succeed in installing the OS on the drive, it won't be bootable.
Cheers
Rod -
I can't get the internet to open and when you click on the icon to open firefox the above message is displayed and I don't know how to fix what is causing the error.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
MY Hard Drive says_"YOU CAN READ ONLY" for the OWNERSHIP AND PERMISSSIONS!
I cannot add anything to my EXTERNAL (SimpleDrivePS) hard drive. When I try to copy something to it, it says "The item cannot be moved because SimpleDrivePS cannot be modified."
Upon control-clicking this external hard drive's icon, under "Get info" it says "You can read only" for it's "Ownership and Permissions."
I have used this hard drive with Windows-based computers, but not with this new Apple yet.
What do I need to do so that I can move or copy things to this external hard drive?
Also, is there a discussion room for just general questions? - There are many little things that I wonder how to do from time to time as I am trying to become accustomed with Apple, like shortcut key for desktop, or where is control panel or link to "my computer" or other shortcut keys - things like that.Hi newsppler;
Since I have never had a disk that was formatted NTFS, I am not absolutely sure exactly how you can discover how it is formatted. I think if you look at the disk with Disk Utility that should tell you.
Yes. If you reformat you will lose everything that is currently on that disk.
To reformat open Disk Utility and then select the disk. You then click the partition tab. This will allow you to select what format you wish to use. I would suggest Mac OS Extended +
Allan -
I am not receiving yahoo email on my IPhone 6 and IPad Air, both are iOS 8.2. I can only access email by going thru Safari to the yahoo mail page. I tried to delete the yahoo account on the phone and reinstalled, to no avail. Any suggestions how to fix this problem?
My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all! -
P re-ordered a book from the app store. notified to download. When I follow the steps to download it states you have already purchased. Any ideas??
Does it show in the Purchased tab in the iTunes store app on your phone, and/or the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes ?
Maybe you are looking for
-
I believe there may be a problem with this version of iTunes. I'm not able to download any songs or videos into iTunes. I've tried to download both and just as a song/video is in load into iTunes the program quits. Has anyone else come across this pr
-
Submitted Podcast, but tracks are out of order
I recently submitted a Podcast and it was approved by Apple, but the page brings up the tracks in a random order. In my RSS feed, the tracks are listed in the correct sequence, however most have identical creation dates. Does iTunes sort the tracks b
-
Problems with setting DriverManager.getConnection as a variable
HI, I was wondering if someone could help me out with a problem i have. I am trying to read in the url, user name and password from an external file, and then add it to con = DriverManager.getConnection(IN HERE); I know that i can connect to the data
-
Excise amount not appearing in MIRO
Hi, For a PO line item I have captured the excise invoice thro J1IEX and then created a GR with reference to the Excise invoice. Due to some reason I reveresed the GR without posting the excise invoice. Then again the GR was done and the Excise invoi
-
Displaying a string in STARs form in JOptionPane!!!
Hi all, I use a JOptionPane in my application that demande password. I want to show input string in STAR (**********) form. Anybody has an idea, or in there a solution to do that? here is my JOptionPane code: String password = JOptionPane.showInputDi