HT5037 This doesn't seem to work

I've downloaded and run the installer but still can't launch iPhoto, continue to get the same prompt about the "Library Upgrader".  Antone else have this issue and managed to solve it?

Jumped the gun, read some other posts and see I have to run the installer from the utilities folder.  This wasn't mentioned as being part of the installation process, normally after install things just work, small wonder many people were having problems.

Similar Messages

  • I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer."  I have tried to update my settings, but this doesn't seem to work.  Any help would be much appreciated

    Hard Drive:  The Hard Drive is on my camera (Sony Handycam)
    Just needed some info on what is going on with your particular system.
    Knowing the exact camera model will also assist us.
    If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
    What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
    FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
    BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
    Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
    Try here for some trouble shooting tips:
    https://discussions.apple.com/message/12682263#12682263
    Al

  • Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Thank you for this, and to Caleb.
    I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
    My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
    So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
    I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
    Thanks again. Any further thoughts welcome.

  • HT5556 This doesn't seem to work in Australia. Anyone know how to make it work?

    Anyone know how to get the camera redemption feature to work in Australia?

    Anyone know how to get the camera redemption feature to work in Australia?

  • HT3131 This doesn't seem to work on Apple Thunderbolt Display and 2011 Macbook Pro.

    Any input would be appreciated

    I've a 15" late 2011 MacBook Pro and an Apple Thunderbolt Display and I run in clamshell mode at least 90% of the time... what sort of problems are you having?
    Clinton

  • Port forwarding to Apex doesn't seem to work

    Hi,
    We have an Oracle 11.1.0.7 database running on Linux in which I've upgraded Apex to 3.2
    I'm using the embedded gateway/listener (no Apache).
    Now I want to make this Apex instance available over the Internet so that a developer can work remotely. However this doesn't seem to work.
    Check the listener log file I see the following lines:
    14-APR-2009 22:38:56 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2529)) * handoff * http * 0
    14-APR-2009 22:38:57 * service_update * D11 * 0
    14-APR-2009 22:38:59 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2530)) * handoff * http * 0
    14-APR-2009 22:39:00 * service_update * D11 * 0
    14-APR-2009 22:39:02 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2531)) * handoff * http * 0
    Tue Apr 14 22:39:31 2009
    14-APR-2009 22:39:31 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2532)) * handoff * http * 0
    14-APR-2009 22:39:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2533)) * handoff * http * 0
    14-APR-2009 22:39:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.4.3)(PORT=2534)) * handoff * http * 0
    14-APR-2009 22:39:33 * service_update * D11 * 0
    Tue Apr 14 22:48:00 2009
    14-APR-2009 22:48:00 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.51)(PORT=2715)) * handoff * http * 0
    14-APR-2009 22:48:00 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.51)(PORT=2717)) * handoff * http * 0
    14-APR-2009 22:48:00 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.1.1.51)(PORT=2719)) * handoff * http * 0
    Can someone explain this log file to me?
    Meanwhile, I'm off to try Apache.
    Cheers,
    Colin

    Hi Rob,
    No, this is from internal LAN connections. I haven't been able to detect anything in the log files when attempting to connect from the internet.
    I'll increase the logging level & post some findings on this later (I'm at a client site right now).
    Cheers,
    Colin

  • I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

    I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?    

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • TS5183 My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore..:-( this has been playing up for some time now.

    My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
    Can antone help me? is there something i can do, apart from buying a new iphone!

    Have you got Siri turned on in settings/general/restrictions?

  • After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

    After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?

    How is it not working?  And how are you doing it?  Drag the movie onto the iTunes icon on the Dock...  what happens?

  • Can negative B&W image be converted to positive, done this on elements previously by inverting but doesn't seem to work same way in lightroom ?

    Can negative B&W image be converted to positive, done this on elements previously by inverting but doesn't seem to work same way in lightroom ?

    You should be able to invert in Lightroom. But choose the point curve rather than the region curve. If the negative is film you might get better results from scanning.

  • I would like to cancel my subscription for Adobe ExportPDF Subscription that I have just signed up for as it doesn't seem to work with my system. How do I do this ?many thanks suslucie

    I would like to cancel my subscription for Adobe ExportPDF Subscription that I have just signed up for as it doesn't seem to work with my system. How do I do this ?many thanks suslucie

    Hi Susan,
    I checked using the email you provided, and there's no history of any orders under that email address. (Then, I removed your email address from you post, since this is a public forum and it's best not to broadcast contact information.)
    I'll message you privately, and you can send along your email from Adobe if you'd like.
    Best,
    Sara

  • Mini dvi to s-video/composite adapter doesn't seem to work?

    basically i'm trying to hook my rather new 2.53 ghz mac mini to my tv, which basically has rca inputs. so, having seen several laptops hooked to this tv as simply as using an s-video to composite adapter, i figured it would be as simple as getting the mini dvi to composite adapter and i'd be good. well, for some reason this doesn't seem to do anything. the other weird thing is that when i hook the cable from the composite adapter to the tv, i get a buzz out of the speakers as the connection is being made. why is a video signal having anything to do with the audio? plugging my playstation 2 into the same input works fine. why the difference?

    Boece wrote:
    !http://images2.monoprice.com/productmediumimages/47241.jpg!
    +
    !http://images2.monoprice.com/productmediumimages/48501.jpg!
    That's the setup I've used. Works great for video and photos, but webpage text can be difficult to read.
    I used the yellow composite input rather than the s-video. My old tv is inside an “entertainment center” type tv stand and is so friggin heavy, it’s a pain in the axx to move, so I just used the composite plug on the front of my tv. Since the Mac mini is sitting in front of the tv it works great:-)
    http://discussions.apple.com/thread.jspa?threadID=2430645&tstart=0
    Message was edited by: James Press1

  • Wacom Tablet doesn't seem to work all of the time?

    I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
    So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
    Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
    Does anyone know what's up?

    Downloaded a driver from website, tablet works now.

  • Safari on my iPhone 6 running 8.02 doesn't seem to work right. Some Java scripts don't show correctly and they do on other browsers I have downloaded. I tried almost everything and nothing seems to work to fix it. Please help.

    Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
    Thanks

    You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
    http://support.apple.com/kb/ht3964

  • I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work. Can anyone suggest what I'm doing wrong?

    I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?

    "gets stuck" - are there any error messages?
    If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test:   Go to...
    Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options.  Turn off all apps from backup and then do a manual backup.  If that doesn't work, then this post will not help.  If the backup works, then go back to the app list and turn some on and try another backup.  If successful, keep repeating these steps.  If it fails at some point, then try to zero in on the one app that seems to make the backup fail.  (I had this problem and found one app failing, probably due to a corrupt data file.)
    This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

Maybe you are looking for

  • Advance payment in Purchase order

    HI Team, we are processing supplier advance payment in PO through ME2DP. while processing advance payment, system is calculating advance payment on base value.  we need this on base value and taxes. how we can do this. regards k

  • Help -- user preferences

    i am trying to write a text editor and i was wondering. what would be the best way to save and load user preferences from a file preferences.dat. this file would contain information like tabbedPane tab locations, textArea tab-size/font style/font col

  • HT2311 itune will not open

    it read when i try and open itunes that the application could not be opened. an unknown error occurred (13014). help i think my startup disk is fill.

  • Photoshop stopped downloading.

    PhotoShop stopped downloading with an error 49 message. Hitting Retry in the Creative Cloud app did nothing. How do I fix this problem?

  • Need Help with sqlldr/cmd prompt....

    Hi, I am successfully using sqlldr using runtime.exec() but the issue is that my next class which is to be run after sqlldr class is using the log files,bad files etc created by sqlldr class. Since sqlldr class invokes command prompt and runs the loa