HT5047 after os5 update camera stopped working, what to do?

After update camera stopped working. What can I do? Tried resetting that didn't work. HELP!!!!!

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

Similar Messages

  • HT1338 after an update safari stopped working any ideas on how to fix this?

    after an update safari stopped working any ideas on how to fix this?

    Use another browser to install Safari again.
    You can download Firefox for the Mac, place the download on a USB thumb drive stick it into the Mac and copy it, run the installer.
    Once FF is on, download a new copy of Safari from Apple's site.
    https://discussions.apple.com/docs/DOC-3046

  • My iPhone's speaker next to the frontal camera stopped working what can I do?

    So since today my frontal speaker next to the frontal camera stopped working and I've been having problems where when I open the camera it reboots I just haven't had time to restore to fix the corrupted file could this be responsible for my speaker not working? I have to use the loud speaker to make a phone call or I won't hear anything if I don't restore will this cause permanent damage to my phone? Plead help! Thanks!

        Hello tmsipos11! That certainly sounds like an aggravating thing to occur! At this point, I recommend making sure that your iPhone 4s has the most recent software. The next upgrade is available now! If you've done so and yet still have this problem, please let me know!
    Dion M.
    VZW Support
    Follow us on Twitter www.twitter.com/vzwsupport

  • Safari, App Store, iTunes, System Updates all stopped working - what can I do?

    I have an early 2011 Macbook Pro running Lion.  I have not had any trouble with computer performance.  I do have internet access and am using Firefox to type this.  So my connection isn't a problem.
    I've had this computer since February-ish, and I've never had problems.  However, a few days ago, Safari just quit working.  I can open it up fine and it loads with a slight hesitation.  However, after about 10 seconds, it just stops loading.  There is NO beachball.  The loading just freezes.
    So for instance, I can open Yahoo.  It will open the page fine.  But the second I try to load my mail or any other site, it just stops in the loading process.  So again, the internet connection isn't the problem.
    And I thought, "Oh, I should install the new updates!  That might fix it."  Wrong.  System Updates just sits in the Install phase until I force close it.  iTunes will not open (beachball).  The App Store opens to a blank page.  Even some games don't open.
    However, Firefox is fine.  And so are most of my other apps.
    Will somebody pleeeeeeease help me?  I hate this.  haha  Thanks.

    Oh and I've tried restarting Safari (multiple times).  I've shut down the computer, too.  No help.

  • After Upgrade to lollipop, the camera stopped working

    Hi, I have upgraded from two days my Z3 Dual software to lollipop 5.0.2 After completion, the camera stopped working. I have applied repare through PC companion and it is still shows the following error: Error
    Camera not available. I have restarted in safe mode but the same problem. I tried many option like factory reset but no use. Can any one help in this matter? Regards
    Bakr

    Try Clearings the camera app data.
    How to clear data on apps.
    From your Home screen
    1. Tap the Application screen icon.
    2. Find and tap Settings > Apps.
    3. Swipe to the All tab.
    4. Find and tap on the camera app.
    5. Tap Force stop > Clear data.
    6. Restart the phone

  • After update to 11.2.202.228 mz USB 1.1 web cam stop working

    Hi,
    I have a camera from MediaTech company, it is written on it MT400 and serial number 2604050599. Before latest update it works, after install newest version of Flash Player it stop working. I tested it on http://testmycam.com as one of Adobe employee advices on forum but I have only black rectangle. On top left corner of this rectangle it is written Camera: USB PC Camera (SN9C 102) , FPS 10. I disabled Hardware acceleration but problem remains. 
    As I remember this camera is USB 1.1. Does new Flash Version support USB 1.1?
    I have checked on Device Manager on my Windows XP Home Edition 2002 Version with SP3 device driver version it is written:
    Manufacturer : Sonix
    Driver date: 2004-04-02 (I can't find newer drivers on web )
    Driver version: 4.6.6.1
    Is it bug or Flash Player stops supporting such devices?
    Regards

    I pressed Allow, before pressing Allow background was grey, after Allow
    it gets black. I see the name of this camera on list. I also try another
    camera from Logitech (I can't remember what name was it, but one of the
    newest) and everything works which suggest it is strictly related with
    this specific camera which I'm using.
    Regards
    W dniu 2012-03-31 08:39, Nodster pisze:
    >
          Re: After update to 11.2.202.228 mz USB 1.1 web cam stop working
    created by Nodster <http://forums.adobe.com/people/Nodster> in /Using
    Flash Player/ - View the full discussion
    <http://forums.adobe.com/message/4304094#4304094

  • I have iPhone 5S after updating to IOS 7.1.1 my camera stopped working!!!!

    After updating to IPS 7.1.1 my camera stopped working, it's just a black screen.

    Hello Darth Evans,
    The troubleshooting steps below can help get your iPhone's camera working again.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Front and back cameras stopped working after IOS 8 update

    My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

    Hi VictoriaViking,
    Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article.  (I know some don't apply to your issue.)
    iPhone: Hardware troubleshooting
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Take care,
    Nubz

  • Why has my camera stopped working on Skype on my macbook air after running a software update to 10.8.5?

    Why has my camera stopped working on Skype on my macbook air after running a software update to 10.8.5?

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT1212 After reaching 'restore and update,' it downloaded the ipad update software. BUT after some mins, 'itunes stopped working.' WHAT TO DO NEXT?

    After reaching 'restore and update,' in itunes, it downloaded the ipad update software. BUT after some mins, 'itunes stopped working.' WHAT TO DO NEXT?

    Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?

  • My iphone 5s isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge i. I tried cleaning it but still nothing! some please help

    A few days after i've updated to iOS 8.1.1 my iphone 5s died and isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge it. I google searched the problem and tried cleaning the charging port but still nothing! some please help

    Please make a Genius Appointment and take it in for service.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • HT1459 4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

    4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

    Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • Camera stop working on my iPad 2 when I did the update

    Camera stop working on my iPad 2 when I did the update to soi7

    Double tap the home button and all apps will be accessible in the multitasking display. Swipe to get to the camera App and drag the thumbnail of the camera app up to the top of the screen to close the app.
    Reset the iPad by holding down on the home and sleep buttons at the same time for about 10 seconds until the Apple logo appears on the screen.
    Try the camera again after the iPad restarts.

  • HT201401 iPhone 4 camera stopped working after iOS 5.1.1

    After upgrading to iOS 5.1.1 my Rear camera stopped working
    Ok I've tried holding my finger on lense, reset, reload Still no use Took it to the store and they would not give me another one. Said its out of warranty they tried to reload it but still bad.  The wanted me to buy a new phone but their iOS has a bug my camera was working before the upgrade not after.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset   >  http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring  >  http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

Maybe you are looking for

  • As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

    Hi, There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying Message processing failed. Cause: javax.resource.ResourceExceptio

  • Is it possible to sort the order of accounts in Mail?

    I have many email accounts, and when they're synced to my iPhone, they show up in a seemingly random order (not alphabetical, by type, etc). Is there any way to sort email accounts on the main Mail screen in a custom order (or simply alphabetically)?

  • Configuring Sender SOAP Adapter

    Hi, I am trying a simple scenario that worked well in XI 2.0 and I am trying to migrate the same scenario to XI 3.0 where I am having problems. 1. Created two data types: material_in that takes a material; material out that have three simple elements

  • Using more than 256 colors in 3D graph?

    Hi, I am using 3D surface plot in Labview 6.i and I would like to know if it is possible to use more than 256 colors (in the Z-scale). Actually I would like to have very smooth change in the color map and this could be possible if we could use 16bit

  • How to open a air conditioner manual from samsung it was created in 7.0 im using 9.0 for windows 7.0

    can anybody solve this as i uninstalled 9.0 installed 7.0 but windows 7 wont support that old version. and no im not going back to xp