HT5093 Problem with camera in maya 2011

why sometimes my model appears so small in the iBook app?
I´m using maya 2011, openCollada exporter.

Confirm your process w/iBooks Author: Best practices for using 3D models - Support - Apple

Similar Messages

  • PSE 10 from Apple Store problem with camera raw 6.7 upgrade

    PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

    Thanks for your help. It works !!!
    Bartek A
    Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
    Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
    created by Barbara B. in Photoshop Elements - View the full discussion
    You will have to do the update manually for the app store version. Instructions are here:
    http://forums.adobe.com/message/4106477
    (that's for 6.6 but the steps/file paths are the same for 6.7)
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Nokia 6303c Problem with camera, says camera on st...

    nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
    many thanks in advance

    try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

    Then the next step would be a restore as new to rule out corruption in the backup.

  • Problems with Camera Raw 6.7 after upgrading to OS 10.8

    I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open.  Does anyone know of a solution or work-around for this problem? 

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • New problem with camera and imovie 08

    i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
    well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

    Hi
    Test another FW-Cable.
    Test Your Camera on another Mac so that DV-in still works OK
    Toogle in iMovie pref: Play-back via Camera (on<->off some times)
    Other ways to import Your miniDV tape:
    Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    What Camcorder ?
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    Using WHAT ? :
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    Free space on internal (start-up) hard disk ? (Others don't count)
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Delete iMovie pref file may help sometimes. I rather start a new account, log into
    this and have a re-try.
    from LKN 1935:
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten:
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check:
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    Yours Bengt W

  • Problem with camera connection kit and IOS 5

    Since I upgraded my IPAD 2 to IOS 5 camera connection kit is no longer working properly:
    - when importing from a given CF card for the first time camera connection kit it is working with my camera (Canon EOS 7D)
    - however, as soon as i take additional photos on a non-empty CF card, things start getting weird when importing:
       - duplicates are no longer reliably recognized (some of the photos imported before are indicated as duplicates others not), hence an incremental upload of photos is no longer viable
         - some RAW photos are corrupted during import (it shows an "RAW" icon in the photo app, but no preview and the photo cannot be enlarged)
    I never had such problems with IOS 4.x I'm really frustrated about IOS 5.0 since camera conenction kit and the ability to deal with RAW photos were my main reasons to buy an IPAD...
    Anybody experiencing  similiar problems? Any viable workarounds?
    Thanks
    Claudio

    Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)"  What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1).  The connection kit won't read the photos due to the extra (1).  How can I fix this without having to rename each of the hundreds of photos one by one?
    Thank you, Cisco.

  • Having problems with my Microsoft Word 2011 for macbook

    Hello,
    Every time I open up the Microsoft work 2011 on my macbook this error message keeps showing up. 
    "The Open XML file Normal.dotm cannot be opened because there are problems with the contents of file name might contain invalid characters (for example, \ /)."
    And then right below it, it says: Details: No error detail available
    So now my questions is why is it doing that? And can you please help me and tell me step by step on what I need to do.
    Also is their a refresh button for Microsoft Word for a macbook?

    You would be better served if you asked questions about Word for the Mac on a different forum:
    http://answers.microsoft.com/en-us/mac/forum/macword
    This forum is for PC based IT users and not too many PC users are familiar with the Mac. I happen to be one that is however.
    George Summers has already suggested renaming your Normal template, but first I think you should remove any prior version of Office for the Mac (if there is one) that is on this machine. There are ways to have multiple versions of Office on the same machine,
    but if you don't really need the prior version you should remove it.
    Create a new user id on the machine and open Word from it. Hopefully you don't get the same error message. Then go to Word > Help and run the Check for Updates function until it tells you that your software is fully updated. Finish up by running the Disk
    Utility app located in Applications/Utilities and Repair Permissions on your Primary Drive, which is usually Macintosh HD. Then restart your system.
    Login under your user id and before starting anything use Finder>Go>Go to folder... and paste this string into the text box.
    ~/Library/Application Support/Microsoft/Office/User Templates and in there should be the Normal.dotm template. If it is not there look for it as George as pointed out from Word>Preferences>File Locations and remove it. It should be in
    the User Templates folder and if it is in a different location this can be causing the problem, which can be fixed but for now, your objective should be to get Word running as Microsoft had expected to run.
    When you are done with this, post your update on the Answers forum that I shared with you and mark this thread as closed.
    Kind Regards, Rich ... http://greatcirclelearning.com

  • Problem with camera ios 5

    Since i updated my iPhone 4 to iOS 5, i have some problems with my camera,I do not have the zoom option, the video mode has a forced zoom and it is always focusig and the film is blurry.
    Can i stop the auto focusig in video mode?

    the zoom part, is corect thx
    but the in the video mode, even when i touch to focus on one point, when a move the phone around or something moves in front of it, it will focus continuously on a new object

  • Problem with camera help

    good morning, I have a problem with my ipad 2 camera photos, are blurry not sharp as it should, someone can help me with this please

    Be sure the camera is clean on your iPad!
    If you're stuck within an app or you've noticed a problem, simply hold both the home button and sleep/wake button at the same time. It's important to keep your fingers on these buttons until step 3.
    After a few seconds the red ‘slide to power off' screen will appear, simply ignore this. Ensure your fingers are still holding down the home and sleep/wake switch.
    Shortly after you should see the Apple logo, it's now safe to let go of the iPad's buttons. Your iPad should now boot, beware this process can take up to 15 minutes or so.

  • Problem with camera on N82

    Hi!
    I got my new N82 just a few days ago, but I have discovered a problem with the camera. When I take a picture with flash, I notice a distinct pink haze, and if I do a closeup with flash, it looks ghastly. Take a look at this picture:
    http://www.12b.no/blog/wp-content/uploads/2008/01/closeup-resized.jpg
    Does anyone know what might be wrong? I've reset the phone to factory defaults, it has not been dropped, shaken or otherwise physically affected. Any ideas?
    My wife's N82, bought at the same time, delivers perfect pictures.

    As you have already tried a restore, I would return it and get a new one. This is obviously hardware related.
    The best way to get a quick response is to use the boards. Please do not be offended if I don't answer emails immediately.

  • Problem with Camera Connection Kit

    I am experiencing a problem with my camera connection kit on my ipad2.  I have tried to use it today, after upgrading ios on ipad, but it does just not recognise the device any more. I have tried rebooting ipad ( twice), tried to use different sd cards, still no use. I have searched the forum for answers but apart from rebooting, ( which i've done) cannot find a fix..I dont seem to be 'Robinson Crusoe' with this problem either, judging by the forums etc..
    As I'm travelling overseas next month, i really will  need this feature on ipad, to download pics from camera. Can anyone help with this...

    Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)"  What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1).  The connection kit won't read the photos due to the extra (1).  How can I fix this without having to rename each of the hundreds of photos one by one?
    Thank you, Cisco.

  • Problem with camera on z1

    i have a problem with the camera it doesn't launch from the shutter key directly the camera either gives me a "camera not available" error when i unlock the phone or i have to unlock the phone to launch the camera what to do??????

    It means that's a third party app acting up, either unisntall one by one until you find the culprit or repair your phone with PCC 
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Problem with Camera N8

    I have a problem with the camera of my N8, the lens is loked, he lens is blocked, then it worked, but the pictures in the sun, are now completely white, restart the device but there is no change, what I can do?
    My N8 es New..
    Thanks

    mmmmh...there must be a mechanical problem to the diaphragm: at first it was stuck closed, then has opened but is stuck wide open. Check if when out of the camera application (or when the phone i off), the lens (not the outer glass, the inner lens) is covered by a black diaphragm. If not (you see the hole of the lens)  it means that it's stuck open as when the cell shut off it closes . When in the camera app, depending on the external light the diaphragm should switch between a mid open to full open position. When off, it should be closed.

  • Problems with camera resolution...

    Hi everyone,
    I've acquired a security cam to test a video-chat with FMS2
    and encounter a problem with the resolution of my cam. It's a CPcam
    CPC371P and It is said to have a resolution of 510*492 (certain
    sites speak of standard resolution?).
    I wrote two simple applications, one to send the cam stream
    and one to receive it, here is the code of both my applications :
    Send.fla:
    var my_nc = new NetConnection();
    cam = Camera.get(IndexCam);
    cam.setQuality(0,80);
    cam.setMode(510,492,15,false);
    my_vid.attachVideo(cam);
    my_nc.connect("rtmp://server.no-ip.org/tchat_cam/");
    ns = new NetStream(my_nc);
    ns.attachVideo(cam);
    ns.publish("webcam","live");
    receive.fla
    var my_nc = new NetConnection();
    my_nc.connect("rtmp://server.no-ip.org/tchat_cam/");
    ns = new NetStream(my_nc);
    my_vid.attachVideo(ns);
    ns.play("webcam");
    As you can see, nothing really complicated. The applications
    work perfectly but no matter the resolution I choose, the image
    seems to be extrapolated and pixellised. I tried 512*384,
    510*492(supposed to be the cam res) and 240*160.
    In any case, the image quality is still really poor...
    If anyone could help me on this, Is it a problem with the
    camera, I may have forgotten an option in my stream ???
    Thanks in advance.
    Guaca666.

    After many tests, trying many different resolutions, It seems
    that It can't go beyond a resolution of 510x480...
    Does anyone know if it is the maximum res of a Stream or if
    there is an option to outpass this problem ? It may be the cause of
    the poor final quality of my video as the camera native resolution
    is 510x492...
    If anyone could help me, it would be a great relief... :)
    Guaca666.

Maybe you are looking for