HT5100 my iphone 4s is locked how can i get into my phone

my phone is locked and im not able to do aanything,
How can i get the itunes logo off the main screen

If you mean activation lock, the only way to activate it is to enter the ID and password that were used to activate it originally.  If you are not the original owner, you'll have to contact that person for that information, or to have them erase it and remove it from their account as explained here: Find My iPhone Activation Lock: Removing a device from a previous owner’s account.  No one else can help you with this and there is no way around it.

Similar Messages

  • HT1212 My iPhone has been disabled because of a forgotten passcode how can I get into my phone

    My iPhone has been locked because I forgot my passcode.   How can I get into my phone?

    Restore it as explained in the article you were just reading.  If you're running iOS 7 with Find My iPhone enabled, you'll have to force it into recovery mode in order to restore it (see http://support.apple.com/kb/ht1808).

  • TS2734 Passcode has been forgotten...How can I get into the phone?

    Help!  My passcode has ben lost/forgotten....How can I get into the phone?

    Try this
    http://support.apple.com/kb/HT1212

  • Forgot my 4 number passcode... how can i get into my phone?

    how can i get into my phone or reset it if i forgot the 4 number passcode?

    http://support.apple.com/kb/ht1212

  • HT4061 I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    I locked myself out of my phone and am out of the country without access to a computer only an iPad to email and access iCloud  how can I get into my phone

    Hi Myreiac,
    Here's what the Apple Support site says you can do if you do not have access to a computer when your device has been disabled:
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    You can access Find My iPhone via the Find My iPhone app on your iPad.
    Good luck!
    Cheers,
    GB

  • How can i get into the phone without the computer or passcode?

    A friend of mine gave me an old iphone to use as a replacement for mine and she no longer has the computer for the itunes which it was synced, nor does she remember the passcode.

    As Allan says, it's not possible.  Frankly, that makes me feel a whole lot more secure.  I would not want to think that if my iPhone were misplaced that someone could get into it without either the computer or passcode.

  • How can I get into my phone if I cant use the touch screen?

    I went to go use my phone and when I attempted to get to the screen to type in my passcode, the area to swipe didnt work. The only feature that "works" is the little arrow on the bottom to get to the brightness feature, etc. I cannot turn my phone off manually or adjust anything on the screen itself. I cant even get to the emergency call screen. Im not sure if restoring the phone through itunes will delete anything I currently have on there... Please help!

    Hi eskimoerin,
    Thanks for visiting Apple Support Communities.
    If you have not already, first try resetting your iPhone using these steps:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the article with these steps here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the touchscreen is still unresponsive after your iPhone resets, use these steps to back up the data on the device and restore it using iTunes:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    All the best,
    Jeremy

  • I'm stuck at the activation stage! I don't have the original sim card and I don't know what carrier it was originally on! How can I get into my phone?

    I was wondering if there was any way of accessing my iPhone 4 without a micro sim card. I am currently at the activating section, and after it tells you to find WIFI, it says to enter a sim card. I bought this iPhone off of my friend and he took out his original sim card! I dont know what carrier he was using. Is there any way I can access the phone just to play music on it for now?

    Buy a H20 Wireless micro SIM card off eBay for $.99. You can activate the phone/SIM from their website. H2O uses AT&Ts network.    
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT201441 I don't have the previous owner's information. How can I get into the phone?!?

    Please help!!

    What model year it the Mac you have? If it is a Late 2011 or newer model then you can first reinstall the Original version of OS X that came on it by using the Online Internet Recovery system. Hold down the Command+Option/Alt+r key at startup and hold them down until you see a Spinning Globe in the center of the screen. From the screen that comes up use Disk Utility to Repartition the drive as one partition aand when that is done close DU and Select Reinstall Mac OS X.
    If it is older then a late 2011 model then you will need the Original System disks for that Mac. These can be order from Apple for a small charge.

  • HT4113 how do i get into my phone while its disabled through iclouds

    my iphone is disabled and my computer will not download itunes how can i get into my phone r wipe it through iclouds r with my apple id

    Go to https://icloud.com/find and log in with your Apple ID.

  • HT4623 i put the wrong passcode on my iphone now is locked how can i unlocke it

    i put the wrong passcode on my iphone now is locked how can i unlocke it

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How can i get into my iphone without activating it through itunes id

    How can I get into my iPhone without activating it through itunes id

    If the iPhone has Find My iPhone activation lock enabled then you will not be able to activate the iPhone without entering the correct Apple ID and password it is locked to. Sorry but there is no way to bypass this.

  • HT1212 how can i get into m locked iPod? as i have forgoten my passcode and is says "iPod is disabled connect to iTunes"

    how can i get into my locked iPod? as i have forgoten my passcode and is says "iPod is disabled connect to iTunes"

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

    My iPhone is stolen. How can I get my address book back from the iCloud? I should have synchronized my iPad address book. However, I loss some recent contacts from iPhone.

    I use my iPad to get the address book backed up by iCloud from my iPhone. However, I cannot see the recent new contacts from my iPad. Is there anyway to check the iCloud server to see if my address book backup from my iPhone is still there?

Maybe you are looking for

  • BT infinity very poor service - what steps to canc...

    Any one advise How I can cancel, without penalty, due to poor service? I had BT Infinity installed end of January 2014 it was fine stable and running at around 65-68mbps until half way through May. Then speed dropped to 19mbps but worse the connectio

  • Error in File 2 Idoc

    Getting following error while doing Simple File to Idoc scnerio Leaf node with min occurence>0 and with out mapping. please Help

  • Implement CollectMerge without BPM?

    Hello all, I have the following scenario: 1. Synchronous message A sent to XI. 2. XI sends it to N receivers. 3. XI merges N responses of type B to one response of the same type. 4. XI sends the merged response as an answer to A. I implemented this s

  • Drawing Binary Diagrams/Trees in Java

    I am needing some of ur expertise. I am requiring to represent a binary decision diagram using Java. The size of the binary decision diagram will vary (e.g. different number of nodes and edges) need some help or advice to find out as to how to do thi

  • How to call the manager of a manager.

    Hello. We need to implement a solution where the create user workflow sends the approval request to the created user's manager. But if the task time outs, then it must send it to the manager's manager. We're having problems trying to call the manager