HT5114 id registeration problem

how can i register my account....bcuz i dont hv any credit card...

Unless the instructions on this page are followed when creating a new account : http://support.apple.com/kb/HT2534
then credit card details will need to be entered before the account can be used in the store.
If you don't have a credit card then you will need to create a new account, and this time follow, exactly, the instructions on that page. If you want to use the same email address then you will need to replace it on that account first e.g. by tapping on it in Settings > iTunes & App Store on your phone, via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com
Creating an account with 'none' :
via a computer's iTunes : https://discussions.apple.com/message/24321860
via an iPhone : https://discussions.apple.com/message/24700173

Similar Messages

Modbus RTU - Reading Holding registers problem - Novus myPCLab

Hello,
I'm trying for a few days to read Holding registers in Novus myPCLab (it uses Modbus RTU protocol). I used both DSC module and Modbus library with no success (it appears to connect correctly but cant read).
I need to read the given current.
Does anyone have any idea about what am I doing wrong?
Here are my vi and the modbus address.
Via DSC
I used the PLC address at "HR Inicial" and 1 at "numero de registros"
Via library
I used the PLC address in "starting address"
Solved!
Go to Solution.

My problem now is that my VI doesn't stops after I stop the while loop, it is necessary for a flat sequence implementation.
Or my other best option is to read and write without closing the Modbus connection. Is that possible with a global variable?
I guess I do have to execute this "Modbus VI" to get my variables at a Main VI if they are in the same project. So, can I make my "Modbus VI" works in the background while the Main VI (who reads and write the addresses from the global variable) works, and when I finish running it, they stop together?
ModBUS VI

Provider Registeration Problem

I tried to register a provider via registration wizard at http://portalstudio.oracle.com/servlet
with the following info.
Name = W007014
Timeout message= Time out occured!
URL= http://W0007014.mycompany.com:80/servlets/sample
but I got the following message
"The Web provider URL you have entered is invalid. The URL must point to a provider that follows the JPDK specifications."
I installed
- JPDK
- Oracle HTTP Server
also changed
- jserv.properties
- zone.properties
- provider.xml
when I type the address http://w0007014.mycompany.com:80 in address line of IE, I can see the "Oracle HTTP Server Components" page also I can see the "Congratulations" page at http://w0007014.mycompany.com:80/servlets/sample also i can run samples form "Welcome to OracleJSP Demo" page .
But I can not register the server.
also my company has a proxy server and firewall do u think those can cause the problem Although I add the address in exceptions for IE setting
Please help!
ThX.
Mohammad
null

Thank you for providing a detailed description of your issue.
You cannot currently register a provider that is bbehind a firewall with Portal Studio. Portal Studio needs to be able to access the provider directly.

Creative cloud registeration problem

I tried to register for creative cloud and nothing showed in my order history... i tried my other credit card and still no product to use.. but my both credit cards have been charged and i got order conformation emails.
I want to cancel them since still in the first 30 days. please advise!

Hi affilex,
Welcome to the Community!
Apologies for the problem, kindly contact our Adobe support and they will help you further. Check the options here: http://www.adobe.com/support/download-install/supportinfo/
-Ankit

Where to find the list of administrators on portal??

Hi,
I am trying to resolve an issue related to the login page.
The customer is getting notifications in case any user registers problem loggin in.
The user who fails to log in, uses the 'GET SUPPORT' link provided on the login page. On the support page, he enters the details and submits the request. This request is supposed to reach the portal administrator,but instead,it is going to the inbox of the customer who reported this error. He is getting a notification for the same.
Where is this list of administrators maintained on portal?
How can we edit it?
Thanks in advance.
Regards,
Aditi Sharma

Hi,
If you need the list of administrators, then goto portal -> Identity Management tab. Here specify Administrator as the user name in the box provided and press Go. This will show the list of Administrator users in the portal. It will list out all users that have administrator roles assigned to it.
If you want to edit the users, select the user from the list. A tab automatically appears below. Select edit.
Rgds,
Soujanya

RG registers and PLA registers - Extraction Problem

Hi,
We have updated balances in table J_2IACCBAL for initial entries for RG registers and PLA registers but the same is not available for extraction in J2I5.
Could you please advise what the problem is?
Regards
Santosh Hegde

Hi Prasanna,
We have updated the balance as on 31.03.2007 as per SAP Help. We tried extracting as on 31.03.2007 as well as 01.04.2007.
Cut over data is as on 31.03.2007 and golive date is 01.04.07.
Pls help
Regards
Santosh Hegde

Problem with Excise Registers

Dear all,
We have some problems in CIN related issues
1. J2IER-1 Balances are not matching with values that are in excise Registers.
2. J2I6 : On Debit Side Cess and H.S.Edu Cess not apearing in the RG23A-II
Kindly suggest where should i check it.So that i will able to get all details correctly.
Best Regards,
Kapil

Hi,
Check it in Report J2I9 to compare the Excise Duty Values.
Here you will get 2 options;
- Annexure: - For details of each invoice
- Abstract: - Excise value summary

Problem while SocketChannel registers with selector

Hi ,
I am coming across problem when i tries to register channel (SocketChannel) with Selector.
Following is the scenario:
1) I create selector in main program
2) I spawns thread and calls (selector.select()) in that thread using created selector in main program
3) Now I have to do toggle of this created SocketChannel (close() the channel and open() again in main program)
4) I close the channel in main program ( i have synchronized channel during close operation)
5) When I try to register again after opening socket my main program hangs forever...Actually
I am seeing random behavior at this point. Some time it works and registers channel with selector
and some time it hangs...Socket connection established correctly..just channel for that socket connection
can not able to register with selector that is currently doing select in another thread...
Please let me know if anybody come across this kind of problem.
Thanks a lot,
Priyank

Thanks a bunch for the above messages, it actually solved one of my problems, which was,
I was,
1. Making serverSocketChannel and registering it with the selector.
2. Starting selector thread.
3. Making ClientSocketChannels and registering these with the selector.
As the selector was started at Step 2, Step 3 was getting blocked, because of selector thread making selector busy, so i read the above messages, and inferred that
1. Make SerSocketChannels
2. Make ClientSocketChannels
3. Start Selector
and it solved my problem of my program getting blocked at step 3 in the first arrangement. So once again thanks alot to the guys here for making a useful discussion and helping me
--Aamir

Problems Reading/Writing Parallel Port Data, Status & control Registers Using In Port.vi and Out port.vi

Hi,
Can anyone there help me Please with the problem. I am trying to
communicate with the parallel port using my program which i have
attached to the message. I am running LabVIEW 7.0 Professional with
application builder. All the program does is reads and writes to the
three parallel port registers. It runs FINE!!! in my computer. But when
i built an executable (see attached) and tried running on a different
computer (with LabVIEW Runtime engine 7.0 installed) the program does
not read/write to the registers. The target PC had the parallel port in
SPP mode just like mine. I can't seem to understand whats going wrong?
Can anyone please help me if you know the right answer.
Thanks
Attachments:
Programs.zip ‏119 KB

Hi Guys,
I too have a problem using "Out Port.vi", but of a diferent kind. I use this VI to control the Parallel Port which in turn controls a small circuit. I use only two data pins, DP-2 and DP-4 for this purpouse. I use LV 7.1 Professional Development version in a Windows 2000 operating system. Now, my main problem is that my code runs fine (both is development and .exe forms) in my development computer, but when I try to run the .exe version in other computers (Windows XP operating system), it asks for a "protocol file" while starting (look at the attached picture).
Now, I really have no idea what kind of a protocol file it asks for and just click "ok" and proceed to work, the most interesting part is that the code works well as I expected. So, my only problem is that it asks for a protocl file which I want to avoid. As with the application building, I do all that is required like including the sub VIs (self developed), creating an installer, enabling the port access, and creating a proper .ini fine. I also use the Out Port.vi from the AccessHW library.
I have my doubts on two fronts,
1) With the version conflict, since my development computer runs with Windows 2000 and my target computers all run with Windows XP
2) With the Out Port.vi which further contains a small VI "Output Word to Port.vi" in it and that further contains Call Library Function Node, which might call soem external files, like what my problem is.(look at the attached picture)
I don't have answers to these questions and may be my problem is in different place, but I would like to hear from anyone who could give me a helping hand. I am in a situation where I could not disclose my code.
Thanks in advance,
mohan
Attachments:
protocol file.zip ‏153 KB

NAT9914 and PIC host device, Problem reading registers.

I am working on a device as a student at Portland State University, and we are using a PIC microcontroller as the host interface. We can initilize the 9914 correctly and using a PCMCIA-GPIB card and NI's interactive control tool, detect it as a listener and successfully send it 1 byte of data. After this it appears to us that the 9914 "freezes". We have used a logic analyzer to watch the events on the bus side as the data is sent to the 9914. The process goes like this.
1. ATN is asserted high.
2. EOI is asserted low.
3. The data is placed on DIO8 - DIO1, (Active Low).
4. NDAV and DAV are asserted low.
5. NRFD is asserted high.
6. NRFD is asserted low, and DAV is asserted high.
7. EOI is asserte
d high.
The problem comes in when we try to read the contents if ISR0 to see if there is data in the DIR (BI bit). The register never shows that the BI bit sets. We have used a logic analyzer to watch as the address is placed on RS2 - RS0, and as the DBIN pin is asserted high.
We cannot send multiple bytes of data to the 9914, the device times out if we try sending more than 1 byte at once, also the device has to be re-initilized once a byte has been sent, before we can successfully send it another byte.
We have tied CE pin on the 9914 to ground, hopefully this does not cause a problem for reading registers. It does not appear to for writing to registers.
We are also wondering if there is a readable register in the 9914 that by default has a value other that 0x00 so we can test our read register routine.
Also when the IFC line is asserted low by the CIC what does the 9914 do? What does the host need to do if anything?
Any suggestions about what may be going on
or what to test in order to find out would be greatly appreciated.
Rick Dyer
ECE, Portland State University

There is an application note, AN110, that discusses creating a device using the NAT9914. The application note contains source code (or at least pseudo-source code) that goes through a test routine to verify that the NAT9914 is connected correctly. You can access this application note though the link below.
http://digital.ni.com/devzone/conceptd.nsf/webmain/40D4BB8DCD8CEB35862568040069E228?OpenDocument
Hopefully this will help you get started.
The IFC line should cause the NAT9914 to transition its talker and listener state machines to the idle state, effectively terminating communication on the bus. It should not really have much other side affects.

Problem with Custom Theme and Color of Registers

Hi everybody,
I am implementing a custom theme with EP SP 15 (Sneak Preview). All the changes I am making in the Theme Editor are displayed correctly, except for the colors of the registers.
The preview in the Theme editor works fine but when I activate the theme in the portal the background of the registers is still the same as in the standard theme (the images for the borders or the registers however are the ones I chose).
I read about the caching problem in the SAP library and deleted the browser cache before saving but it didn't help.
Any ideas or hints would be appreciated!
Regards Andy

Hi,
If you are talking about custom registration page, accessed via login page, you have to change its background manually by editing logon package. There is a procedure on help.sap.com how to change logon page.
Here I'm pasting the necessary parts. But hava a look at original doc.
To customize the logon UI, we recommend the following procedure:
   1. Make a copy of com.sap.portal.runtime.logon.par.bak and rename it. In this example, it is renamed to my.new.logon.par.
   2. Move my.new.logon.par to a location outside of the <SAPJ2EEngine-deployment-dir>.
   3. Extract the files from my.new.logon.par preserving the directory structure.
   4. Modify files in the extracted PAR file.
   5. Put the modified files back into my.new.logon.par.
   6. Copy my.new.logon.par back to <SAPJ2Eengine-deployment-dir>\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\deployment\pcd.
   7. Rename the file <SAPJ2Eengine-deployment-dir>\cluster\server\ume\authschemes.xml.bak to authschemes.xml.
   8. In authschemes.xml, replace all occurrences of the string "com.sap.portal.runtime.logon" with "my.new.logon" in the tags <frontendtarget> and save the file.
   9. Restart the portal.
--> Changing the authschemes.xml File
You can change the authschemes.xml file using the Config Tool of SAP Web Application Server Java. When you edit the file, you should download the file to a local directory, edit it, and when uploading the edited file, create a new node in the configuration tree for it. In this way you do not loose the original version of the file.
       1.      Start the Config Tool by executing <SAPJ2EEEngine_installation>\j2ee\configtool\configtool.bat.
       2.      Choose the symbol for Switch to configuration editor mode.
       3.      In the tree, navigate to cluster_data u00AE server u00AE persistent u00AE com.sap.security.core.ume.service.
       4.      To switch to edit mode, choose (Switch between view and edit mode).
       5.      In the tree, select authschemes.xml and choose (Show the details of the selected node).
       6.      Choose Download and save the file to a local directory.
       7.      Edit the file locally.
       8.      Create a new node in the configuration tree for the edited file as follows:
                            a.      Select the node com.sap.security.core.ume.service.
                            b.      Choose the symbol for Create a node below the selected node ().
                            c.      Select the type File-entry.
                            d.      Choose Upload and select the file from your local directory.
                            e.      Enter the name for the entry, for example, authschemes_productive.xml. By default, the name of the uploaded file is used.
                              f.      Choose Create.
                            g.      Choose Close window.
The new node appears in the configuration tree.
For UME to use the new file, you have to change the value of the property login.authschemes.definition.file to the name of the new authschemes file. Change the property as described in Editing UME Properties.
       9.      Restart the nodes in the cluster for the changes to take effect.

My iPhone 4 is no longer recognised by my laptop, and no longer registers being plugged in to charge, even though it will charge slowly if plugged in and turned off. It's not a cable problem or a computer problem, as I've checked these.

Hey, over the past couple of days my iPhone 4 (GMS, Model A1332, EMC 380B - running on iOS 7.1.2) has begun inexplicably intermittently not recognizing being plugged in to charge or being connected to my laptop. As of today, it has complete stopped recognizing being plugged in to charge or connected to the laptop.
If I plug it in to charge, whilst it is on, nothing happens and the battery drains.
If I plug it in to charge and turn in off, it will charge very very slowly - though it will charge fully after a long time.
When I connect it to my laptop, nothing happens - it doesn't appear in iTunes, and it doesn't charge or recognize being connected to the laptop (there is no charging symbol, no noise from either phone or computer registering the connection as it usual did, or another sign of any connection between the devices, though, again, it will charge very slowly if turned off).
I've ruled out the possibility of it being a cable problem, by using a friend's cable and finding that didn't allow it to recognize being plugged into the wall to be charged either, or being plugged into the computer.
My friend's cable does work on their own iPhone (ie, when plugged into the wall with their cable, their iPhone acknowledges this and charges properly, and when plugged into my computer with their cable both my computer and their iPhone recognize the connection).
So, it's definitely a problem with my iPhone itself, but I don't know what.
As I say, it will charge very slowly, if it's switched off whilst it's plugged in, but it won't acknowledge being plugged in, and will only drain if it is turned on whilst being plugged in - and it will not recognize being connect to my computer.
Please help me figure out what is wrong with it, as this is beyond annoying and I'm literally banging my head against the wall - the iPhone is little over a year old.
Cheers.

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

The VI of I2C driver for reading and writing registers was functional in 6.1 but that same VI is not working for 7.0 & 7.1 version. WinIO is also used in generating the dll as OS is Windows2000. What could be the problem?

THIS IS THE CPP FOR READ. sIMILAR vi WAS MADE FOR WRITE
Attachments:
I2C_Read.cpp ‏7 KB
I2C_Read.h ‏2 KB
I2C_Exe.h ‏1 KB

HI,
I'm not familiary wiht the WinIO functio that you are using here but there are a couple of thisngs to watch out for when doing low-level access.
The most common problem with low level IO functions is that if they were created for Win9x, they will not work under Win NT/2000/XP. NT based OSes require you to have kernel access to do any low level communication. Make sure that the WinIO library that you are using is aupported under Win2K.
Since you have the code for the dll available, you could attach LabVIEW as an external process in your C compiler and debug the dll; this can helps you track down the exact function that is failing.
Just my 2 cents.
Regards,
Juan Carlos
N.I.

After a malware attack last week that rewrote my registers I had to restart from a restore point. The problem is now when firefox wants to update, it want to use the site that contains malware. I need to reset it to the proper site how do I do this?

My son was using the cpu at the time of the first attack. He got it cleared out and working. A day later it hit again when I was using the computer. As soon as I saw the fake virus scan I brought up taskmaster and stopped it. Almost immediately it started running again so I stopped it a second time. When I did, it shut down windows explorer. The only thing that would run was the malware. I brought it up at a restore point and it ran normally. This cycle has been repeated several times.
Both Avast and SpybotSD will find and delete the malware, and both of these update normally. I think that when firefox updates itself, it is requesting data from a malware site rater than from you. How do I reset this?

Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.

I am experiencing the problem "your computer restarted because of a problem" from the past 3 months and its mostly everyday, also I click on the report it to apple button and it says report submitted but apple doesn't respond. HELP!

Also I am using a mid 2012 macbok air.
Here is the stuff it showed me:
Interval Since Last Panic Report: 116543 sec
Panics Since Last Report:          1
Anonymous UUID:                    6230F21B-9B4A-4F55-C557-9B70A3D3FBD4
Thu Jun 13 12:46:57 2013
panic(cpu 1 caller 0xffffff800d8b8709): "Double fault at 0xffffff800d828034, registers:\n" "CR0: 0x000000008001003b, CR2: 0xffffff8132e1ff98, CR3: 0x000000000fc28000, CR4: 0x00000000001606e0\n" "RAX: 0xffffff8132e200b0, RBX: 0xffffff7f8df368db, RCX: 0xffffff8132e200b0, RDX: 0xffffff800db74970\n" "RSP: 0xffffff8132e1ffa0, RBP: 0xffffff8132e200a0, RSI: 0xffffff8132e20108, RDI: 0xffffff7f8df368db\n" "R8: 0x000000000000000a, R9: 0x0000000000000010, R10: 0x0000000000000000, R11: 0x0000000000000000\n" "R12: 0x00000000e00002c2, R13: 0xffffff8020fdbf00, R14: 0xffffff7f8df39ee0, R15: 0xffffff8020ea1000\n" "RFL: 0x0000000000010286, RIP: 0xffffff800d828034, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.22.13/osfmk/i386/trap_native.c: 280
Backtrace (CPU 1), Frame : Return Address
0xffffff80f5ac5ec0 : 0xffffff800d81d626
0xffffff80f5ac5f30 : 0xffffff800d8b8709
0xffffff80f5ac60a0 : 0xffffff800d8cddcf
0xffffff8132e200a0 : 0xffffff800db74a62
0xffffff8132e200c0 : 0xffffff7f8df31d8d
0xffffff8132e20130 : 0xffffff7f8df2d283
0xffffff8132e201a0 : 0xffffff7f8df2f5a0
0xffffff8132e20260 : 0xffffff800dc4729a
0xffffff8132e202c0 : 0xffffff7f8dda3f3e
0xffffff8132e20330 : 0xffffff7f8e219fed
0xffffff8132e20360 : 0xffffff7f8e219d05
0xffffff8132e20390 : 0xffffff7f8dd9841c
0xffffff8132e20480 : 0xffffff7f8df2fad4
0xffffff8132e204f0 : 0xffffff7f8dd97fae
0xffffff8132e20580 : 0xffffff7f8dd9939e
0xffffff8132e20660 : 0xffffff800dc4729a
0xffffff8132e206c0 : 0xffffff7f8dd9e8fe
0xffffff8132e20790 : 0xffffff7f8ddc25ce
0xffffff8132e20810 : 0xffffff7f8dda431b
0xffffff8132e20880 : 0xffffff7f8dda42a1
0xffffff8132e208d0 : 0xffffff7f8e21a5c1
0xffffff8132e20910 : 0xffffff7f8e214662
0xffffff8132e20940 : 0xffffff7f8dd9841c
0xffffff8132e20a30 : 0xffffff7f8df2fad4
0xffffff8132e20aa0 : 0xffffff7f8dd97fae
0xffffff8132e20b30 : 0xffffff7f8dd9939e
0xffffff8132e20c10 : 0xffffff800dc4729a
0xffffff8132e20c70 : 0xffffff7f8dd9e8fe
0xffffff8132e20d40 : 0xffffff7f8ddc25ce
0xffffff8132e20dc0 : 0xffffff7f8dda431b
0xffffff8132e20e30 : 0xffffff7f8dda42a1
0xffffff8132e20e80 : 0xffffff7f8e21a5c1
0xffffff8132e20ec0 : 0xffffff7f8e214662
0xffffff8132e20ef0 : 0xffffff7f8dd9841c
0xffffff8132e20fe0 : 0xffffff7f8df2fad4
0xffffff8132e21050 : 0xffffff7f8dd97fae
0xffffff8132e210e0 : 0xffffff7f8dd9939e
0xffffff8132e211c0 : 0xffffff800dc4729a
0xffffff8132e21220 : 0xffffff7f8dd9e8fe
0xffffff8132e212f0 : 0xffffff7f8ddc25ce
0xffffff8132e21370 : 0xffffff7f8dda431b
0xffffff8132e213e0 : 0xffffff7f8dda42a1
0xffffff8132e21430 : 0xffffff7f8e21a5c1
0xffffff8132e21470 : 0xffffff7f8e214662
0xffffff8132e214a0 : 0xffffff7f8dd9841c
0xffffff8132e21590 : 0xffffff7f8df2fad4
0xffffff8132e21600 : 0xffffff7f8dd97fae
0xffffff8132e21690 : 0xffffff7f8dd9939e
0xffffff8132e21770 : 0xffffff800dc4729a
0xffffff8132e217d0 : 0xffffff7f8dd9e8fe
0xffffff8132e218a0 : 0xffffff7f8ddc25ce
0xffffff8132e21920 : 0xffffff7f8dda431b
0xffffff8132e21990 : 0xffffff7f8dda42a1
0xffffff8132e219e0 : 0xffffff7f8e21a5c1
0xffffff8132e21a20 : 0xffffff7f8e214662
0xffffff8132e21a50 : 0xffffff7f8dd9841c
0xffffff8132e21b40 : 0xffffff7f8df2d37e
0xffffff8132e21bb0 : 0xffffff7f8df2f5a0
0xffffff8132e21c70 : 0xffffff800dc4729a
0xffffff8132e21cd0 : 0xffffff7f8dda3f3e
0xffffff8132e21d40 : 0xffffff7f8e219fed
0xffffff8132e21d70 : 0xffffff7f8e219d05
0xffffff8132e21da0 : 0xffffff7f8dd9841c
0xffffff8132e21e90 : 0xffffff7f8df2fad4
0xffffff8132e21f00 : 0xffffff7f8dd97fae
0xffffff8132e21f90 : 0xffffff7f8dd9939e
0xffffff8132e22070 : 0xffffff800dc4729a
0xffffff8132e220d0 : 0xffffff7f8dd9e8fe
0xffffff8132e221a0 : 0xffffff7f8ddc25ce
0xffffff8132e22220 : 0xffffff7f8dda431b
0xffffff8132e22290 : 0xffffff7f8dda42a1
0xffffff8132e222e0 : 0xffffff7f8e21a5c1
0xffffff8132e22320 : 0xffffff7f8e214662
0xffffff8132e22350 : 0xffffff7f8dd9841c
0xffffff8132e22440 : 0xffffff7f8df2d37e
0xffffff8132e224b0 : 0xffffff7f8df2f5a0
0xffffff8132e22570 : 0xffffff800dc4729a
0xffffff8132e225d0 : 0xffffff7f8dda3f3e
0xffffff8132e22640 : 0xffffff7f8e219fed
0xffffff8132e22670 : 0xffffff7f8e219d05
          Backtrace continues...
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000->0xffffff7f8ddf0fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8dd6c000
         com.apple.driver.AppleUSBHub(5.5.5)[54546EC2-8891-334B-9626-1EF6A02450DE]@0xfff fff7f8e213000->0xffffff7f8e227fff
            dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000
         dl.uds.netusb.controller(1.0d1)[8A6F03A2-5A6B-7137-C413-815E20000EB4]@0xffffff7 f8df25000->0xffffff7f8df41fff
            dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x000000000d600000
Kernel text base: 0xffffff800d800000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 117875499067298
last loaded kext at 105449581298871: com.apple.driver.AppleUSBTCKeyEventDriver          237.1 (addr 0xffffff7f8f551000, size 12288)
last unloaded kext at 105568296897670: com.apple.driver.AppleUSBCDC          4.1.23 (addr 0xffffff7f8f545000, size 12288)
loaded kexts:
foo.tap          1.0
foo.tun          1.0
dl.uds.netusb.controller          1.0.0d1
com.rim.driver.BlackBerryUSBDriverInt          0.0.74
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.AGPM          100.12.87
com.apple.driver.X86PlatformShim          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleBacklight          170.2.5
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleIntelHD4000Graphics          8.1.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleIntelFramebufferCapri          8.1.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleUSBXHCI          5.5.5
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOSurface          86.0.4
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IOAcceleratorFamily          30.14
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleThunderboltNHI          1.6.3
com.apple.iokit.IOThunderboltFamily          2.2.6
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.driver.AppleKeyStore          28.21
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOStorageFamily          1.8
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookAir5,2, BootROM MBA51.00EF.B02, 2 processors, Intel Core i7, 2 GHz, 8 GB, SMC 2.5f7
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434353153364D465238412D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434353153364D465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 6
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821f, 0x1d181300 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8404, 0x1d183000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x024c, 0x1d182000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3

Apple doesn't respond to crash or panic reports. They're for internal use only.
Any or all of the following third-party system modifications may be contributing to your problem:
OpenVPN client
Driver for unknown USB network device
BlackBerry Desktop Manager
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can determine which is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

HT5114 id registeration problem

Similar Messages

Maybe you are looking for