HT5127 how do you remove final cut pro x

i had installd a final cur pro x and i  install a final pro cut  but it does not come up so how can i get red of the final pro cut x and find the other one thanks

Proper installation is to install Final Cut Studio first.  Then install Final Cut Pro X.
The Final Cut Pro X installation will place the Final Cut Studio apps into a folder called "Final Cut Studio".  Since you can't have two "Final Cut Pro" apps in the same folder.  Then you'd launch FCP X from the Applications folder, and lanuch FCP 7 from the Applications > Final Cut Studio folder.
Both can live on the same system at the same time quite easily.
Here is the Apple support document that explains it all in detail for various types of installation.
http://support.apple.com/kb/HT4722

Similar Messages

  • How do you import final cut pro projects into imovie? (like you create a pr

    How do you import final cut pro projects into imovie?
    (like you create a project in final cut but i want to save it, and import it into imovie..

    Hi -
    Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
    If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
    In FCP:
    Click on the Sequence Icon you want to export in your browser.
    Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
    Close FCP and open iMovie.
    In iMovie:
    Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
    Click Import. Your movie will be imported into iMovie.
    Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
    Hope this helps.
    MtD

  • How do I remove Final Cut Pro X Addins/Effects?

    I have some addins I want to remove from Final Cut Pro X.  I no longer need/want them listed.  I only want to see the default Effects.  I dont need to know how to remove them from my projects, I want them off the computer all together.

    dastoelk wrote:
    Karsten! You beat me to the punch. I thought the SAME thing soon after I logged off.
    although fxFactory was gracious enough to invite me to some free 'tests', I must admit, that this 'automatic reinstall after deletion' is a bit .... annoying? un-Mac-like? … I'm not customed to such behavior, at last.
    the first time, I installed everything, then my effects-tab in FCPX was a bit crowded, used the steps you mentioned too - and, oh wonder, on next launch, everything back again!
    ... 'til I understood the 'plug-in installer & management'-function of fxFactory! <slapping own forehead>
    on the other hand, every 3rd post here
    http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
    asks for 'how do you install plugins?"
    so, it needs a better/convenient routine ....

  • How do you reinstall final cut pro?

    the disc i have installs studio, which is 4 programs, i just want to reinstall fcp,

    When you start the install, you are given the choice of which programs you want.
    x

  • How do you uninstall Final Cut Pro 5?

    I have found documentation on Apple's site for uninstalling FCP 3, but not 4, nor 4.5 and not 5.
    Someone told me that uninstalling FCP 4/4.5 (HD) is the same as uninstally FCP 5, but I haven't really found anything for uninstalling 4/4.5.
    So any tips would be very helpful.
    Many thanks,
    Samah

    How to uninstall FCP 5
    Here's the way to do it:
    1) Close FCP
    2) Go to: /users/username/library/preferences/
    a. Delete the com.apple.FinalCutPro.plist
    b. Delete the FCP User data folder.
    3) Go to: Applications
    a. Delete FCP application
    b. Delete FCP HD addition easy setups folder.
    4) Go to: /library/applicaton support/fcp system support/
    a. Delete Custom Settings folder
    b. Delete Plugins folder
    5) Go to: /library/receipts/ and delete the following:
    a. AnalogPAL.pkg
    b. AppleIntermediateCodec.pkg
    c. DigitalPAL.pkg
    d. DVCproHDCodec.pkg
    e. FinalCutPro.pkg
    f. FinalCutproHDUpdate4.5.pkg
    g. FinalCutProHelp.pkg
    h. HDVCodec.pkg
    i. IMXCodec.pkg
    j. Uncompressed422.pkg
    k. VideoOutSupport.pkg
    Shane

  • HT5127 do I need to remove final cut pro 7 before installing final cut pro x

    do I need to remove final cut pro 7 before installing final cut pro x

    No. When you install FCP, it will move the FCS applications into a folder called Final Cut Studio.

  • Do you need final cut pro to work it

    do you need final cut pro to be able to use motion 5 can someone help me and what does motion do for a start?

    Motion 5 is a standalone application and can be run without FCPX...
    http://forums.creativecow.net/thread/170/869239
    To start with: Motion 5 can be used as a compositing and graphics application...
    An addition to any video-editing software...
    http://www.pinoymaclovers.com/2011/12/how-to-use-motion-5-video-tutorials.html
    Regards
    Nolan

  • How do I stop Final Cut Pro 10.1 from  introducing artifacts?

    How do I stop Final Cut Pro 10.1 from introducing artifacts?
    Can someone please tell me what do do differently so that my edited video does not develop artifacts that were not in the original camera file.  My Sony HDR CX900 produces crazy detailed XAVC S video that FCPX seems to import with no problem but FCPX is introducing artifacts: some on import and more on share. The artifact in the examples below appears above and below the horizontal rope line on this model boat. Please look closely. It doesn't look to bad here, but it dances on my screen. Also, the video generally degrades much more than I would have hoped. How can I get more professional results?  Sorry for the long post, but more information now might save time and questions.
    Below is a portion of a frame opened in quicktime directly from camera's card.
    Below is the associated Inspector for above frame
    Here is the same after it is imported into FCPX. Optimized and Proxy Media were created, but FCPX seems to select what to play so I can't tell you which one is shown here.
    Here is the associated Inspector capture from FCPX.
    Here is the same frame once again after it is Shared as ProRes 422. Note the horizontal lines above and below the rope lines on this model yacht.
    Here is Inspector for the above file.
    Here is the same once again after it is Shared as H.264 Better Quality.
    I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
    How can I get more professional results?
    And here is the associated Inspector for the above video.
    I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
    How can I get more professional results?

    Russ H.
    When I right click on the clip in the browser and select Transcode Media, the dialog box opens, Optimize Media is checked, but OK is greyed out. Transcode is not an option. I think this points to the fact that FCPX is doesn't need to transcode XAVC-S or FCPX can't transcode XAVC-S. This is a new Sony codec produced by the new HDR CX900. The codec is HD at 50Mbps.
    Tom Wolsky,
    I selected Optimized Media in the viewer and both the timeline and exports (422 and H.264) look great.
    The 24 second long exported video jumps a couple of times as if skipping a frame, as it plays. Could this be related to 29.97 instead of 30fps?
    Thank you so much for getting the image right. Now if I can just eliminate those couple of small jumps.

  • I removed Final Cut Pro X , followed the instructions, However my computer still thinks that is installed and doesn't allow me to re install

    I removed Final Cut Pro X , followed the instructions, However my computer still thinks that is installed and doesn't allow me to re install

    Does it say it is already installed, or not compatible?  If you have more than one boot volume attached, is it possible a copy is also on another drive/
    Ernie

  • How Can I transfer Final Cut Pro X to another computer

    How can I transfer Final Cut Pro X to another computer without connecting the two

    As Kappy said, download it from the App Store - this will give you a brand new copy. However unlikely, it's just possible you might be copying a corrupt version from the original computer.
    In the App Store, make certain you use the same Apple ID that the App was purchased with.
    Andy

  • HT4589 how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    Thanks, I have found this on the "APPLE" support site; Final Cut Pro X: How to remove and reinstall Final Cut Pro X on; http://support.apple.com/kb/HT5149, which after reading through increased my trepidation ! Your directions are frightingly concise but Just what I needed..

  • How can i buy final cut pro with my account p.s its no u.s id?

    how can i buy final cut pro with my account p.s its no u.s id?

    You are wanting to change your account to US to buy FCPX? Do you have a credit card at least?

  • How to upgrade my Final Cut Pro 6 to X

    How to upgrade my Final Cut Pro 6 to X?

    There is no upgrade to FCPX, you have to buy it for $299.99. Yes, Russ is right, FCPX is very different than previous versions, I realized that I would have to start from scratch with it. Look up free tutorials online, there are a few good ones. If you try and just jump in, you'll get very frustrated very fast. Take the time to learn it before you try any important projects. Read my post:
    https://discussions.apple.com/message/23411640#23411640

  • When you uninstall final cut pro does your projects delete too

    When you uninstall final cut pro does your projects delete too

    No, only the app is removed.
    The Events and Projects are completely untouched and ready to use when you reinstall or update FCP X.
    To uninstall simply drag the FCP X application icon to the trash and delete it.

  • How to export from Final Cut Pro after downloading Maverick

    Final Cut Pro no longer exports after installing Maverick.  I get this: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)  - have paid for Compressor and instaled it - but it makes no difference.

    But how do I update Final Cut Pro 10.0.3?  Apple says all my updates for everything are fine.  It worked well before I installed Maverick, and now I can't get any of my short films out of it!  They won't copy over to IMovie so I have to start again and basically scrap Final Cut Pro - which seems a bit unfair just for updating to Maverick.  Makes the free download a bit pricey in the long term.

Maybe you are looking for

  • Open Platform rookie question

    Hi I have seen many references to an object called OPsystem, which I belive is not JavaCard standard, but comes on cards based on "Open Platform". Where can I find a complete API description for OPsystem, with all its functions such as verifyPin() et

  • Control Of Purchase Order No. Range

    Dear Gurus, Greetings! I would like to know if there is any possibility by which we can control Number ranges of Purchase Requisition / Purchase Order on Account Assignment Category or Item Category in the Line Items. I am assuming Ideal scenario whe

  • System Clipboard - I want to check system clipboard

    Hi I Want to check system clipboard on regular interval , my forms interact with another application in VB , That application send some value to system clipboard i want to check if values being send in system clipboard or not , if it has being send t

  • Time Machine vs. Deja Vu

    What is the functional or practical difference between Time Machine and Deja Vu?

  • Connection is fine, but mail won't send?

    When I use the 'Connection Doctor' it says all of the connections are successful, but it still won't send!