HT5148 Hey everyone! Could someone help me with a problem please?

Hi!
When I try to import media in FCPX (last one) I'm supposed to be able to set in and out points for imported clip, i.e. if I don't want to import huge file but a few seconds of it. I can even set multiple ins and outs points and then import them. Well that's the problem - I can't. FCPX only let me import the whole file even when I do set in\out points and press "import selected". I set those points holding "shift" and presing LMB because "i" and "o" are disabled for me for some reason (they are even greyed out in "menu bar\mark". Is that a bug? I saw multiple videos on that and looked it up on the imterned but noone seems to have anything like that, so it is very confusing. If I have my media in "event" folder however I can set ins and outs ok, no problem.
Thank you in advance.

https://discussions.apple.com/message/22292353#22292353

Similar Messages

Could someone help me with instructions for doing a clean install for iMac with mountain lion 10.8.4 ?

   Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20" with Mountain Lion 10.8.4 ?
   Thank You,
                            leetruitt

   Barney, William, nbar, Galt\'s Gulch:
   A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician. The tune up wiped over 1200 titles of my music in iTunes, also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get variations of this:
ACL found but not expected on
"private/etc/resolve.conf"
"private/etc/raddb/sites-enabled/inner-tunnel"
"private/etc/rabbd/sites-enabled/control-socket"
     Also, after four years of intense daily use it is cluttered with much junk, and every app that I was curious about, and I am a very curious guy.
   So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
   Crazy, I know, but to me a Mac represents something far beyond the ordinary input ➛ process ➛ output title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
    So, these are my reasons for wanting to do a clean install, correctly.
        Thank you, Truitt

Hello, Could someone help me with lightroom 6. I can't seem to buy the upgrade from lightroom 5 to 6 on the desktop. Thanks.

Hello, could someone help me with lightroom 6. I can't seem to buy the upgrade from lightroom 5 to six on my desktop? Thanks.

Products
if that link doesn't work for you contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Could someone help me with comparing the contents of 2 folders?

I'm trying to compare my iTunes music folder which is located in it's default location with a external USB hard drive. I was reading this article on how to do it using Terminal but I have NO CLUE on what to type in the command line. I'm clueless on this! Could someone help me with the commands I need to compare the 2 folders? I've included the link about what I'm trying to accomplish.
http://www.macworld.com/article/132219/2008/02/termfoldercomp.html

I tell you how. But remember that Terminal isn't a good place to be kicking around if you're not sure of what your doing. You can issue many commands as root that are irreversible. Tread very carefully, or get yourself a good GUI utility that can do that.
It's asking you to cd (change directory to the folder that your files for comparison are in.
So, you type, cd (leave a space) then you can just drag the folder to the Terminal and it will fill in the rest of the path.
Then press Return
Then type this at the prompt:
diff -rq folder1 folder2
(replacing "folder1 folder2 with the name of your folders. Leave spaces where indicated.
Press return.
-mj

TS2755 Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this??

Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this???

Check this article: iOS: About Messages
Additional Information
You can change your iMessage Caller ID setting on iOS devices in Settings > Messages > Receive At > Caller ID. Note that the Caller ID setting is used only for new conversations. If you would like to change the address from which messages are sent, first change your Caller ID, and then delete the existing conversation and start a new one.
iMessage responses will be sent from the address the recipient most recently messaged. For example, on iPhone you can receive messages sent to your Apple ID and phone number. A friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if your Caller ID is set to your phone number.

Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic.

When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?

When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?

Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

My iphone 4s is deactivated, the phone is asking for my account and password but i forgot my apple id password. and i can't reset it. can someone help me with my problem? thanks.

I have an iPhone 4s and it is now deactivated. the phone is asking for my apple account and password. but i have forgotten my password. i tried to reset it on iforgot.apple.com, and when i entered my apple id the next thing that appeared on screen is that i have to chose either email verification or security questions. then i click the security question then it asked about my birthday. there where only asking the month and day. then i entered my birthday which is March 8.
so can somebody help me with this problem?
my apple id account is "[email protected]"
thanks in advance!

The email you should NOT have published, is your iCloud, not Apple ID
You Apple ID is a valid email address
This is a user forum, not Apple customer service.
I gather the security question did not work.
If you have an email address, why not use that?
If this fails you have to contact support and schedule help.

Could Someone Help Me With An Old Cisco LocalDirector?

Hello. I recently purchased an old Pix LocalDirector from eBay. As one would expect, it came with no documentation or configuration notes but for $20.00, it was hard to resist. The seller didn't know if it even worked. I thought I'd take a chance and to my suprise, the little old Pix fired right up and ran. Unfortunately, the last user failed to clear the enable password, so I can't get into it to reconfigure it for use in my little home network. I registered myself here on the Cisco web site in hopes I could download the unlock key file but the web site said I had to purchase a service agreement from Cisco before I coul;d get this file. Well, I know from myt professional IT past that I couild never afford one of those agreements for myself and considering this is a well-beyond end-of-life product, I doubt they would sell me one anyhow. So, can anyone tell me if there's a way to clear the password in the hardware? Is there peradventure someone at Cisco who might turn loose of of a key file to this old thing? As I mentioned, it's a Pix LocalDirector running software version 4.2(4), according to the "show version" command. The serial number is: 18003122. Could someone out there help me with this? Thank-you. Mike.

Well, I guess "Someone" ended-up being me. I located a source for the password recovery/resetting disk (using Micro$oft's search engine: Bing - much to my chagrin - Google, go hang your head in shame), and created one disk for the 520 and one for the LocalDirector. I then loaded them up, one at a time, reset, and Presto! The enable passwords were cleared and I am now able to reconfigure the interfaces and everything else. I'd pat myself on the back but it hurts and looks ridiculous. Bye for now, all!

Could someone help me with the correct syntax.

I have the following statement in a scriplet:
out.println( " <td width=\"22%\"><A HREF=\"ContractAdmin.jsp?contractNumber=" + <jsp:getProperty name="contractBean" property="cnum"/> + "\">" + <jsp:getProperty name="contractBean" property="cnum"/> + "</a>" );
The JSP will not compile. Could someone tell me what I'm doing wrong.
Thanks in advance.
Dosteov

Hi dosteov ! =O)
I think, the problem is that You are trying to mix scriptlets & jsp tags. If you will correct Your expression to this one:
out.println( " <td width=\"22%\"><A HREF=\"ContractAdmin.jsp?contractNumber=" + contractBean.getCnum() + "\">" contractBean.getCnum()+ "</a>" );
it should work. Anyway - trying to execute the tags inside the scriptlet leads to the JSP compiling problems.
I hope it helps.
Regards =O)

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

Could someone help me solve this problem?

Could anyone help me, I'm with Adobe Creative Cloud after being installed it but it does not usually performs correctly and as shown in the image below. I am Brazilian is'm using google translator.

Hi Juliane sanchez,
Please refer to links below where the issue stands resolved:
1. Blank white screen | Sign in | Creative Cloud Packager
2. New Creative Cloud App unusable: it's blank!
3. Re: creative cloud is blank window why?
Regards,
Sheena

Could anyone help me with this problem?

Hello!
I�m a working with JMS Tutorial of Jms.(J2EE 1.3.1). I follow all the steps of the tutorial, and when i write
"java -Djms.properties=%J2EE_HOME%\config\jms_client.properties SimpleQueueSender MyQueue 3"
The console shows me the following error:
"Exception in thread "main" java.lang.NoClassDefFoundError: Files\s1studio\ee\j2s
dkee1/3/1\config\jms_client/properties"
I don�t know hot to fix this error. The classpath, and all the variables are correctily defined. I use XP o.s., jdkse 1.4 and j2see 1.3.1, and i repeat, i follow the steps of the tutorial. Could anyone help me?
Many Thanks.
Note: Sorry for my poor English.

Well, it looks as if somehow your command window is converting periods into forward slashes, since "1.3.1" appears in the output as "1/3/1" and "jms_client.properties" appears as "jms_client/properties". That is why the file is not found. If you can figure out how to stop it from doing this, the java command should be able to find the file. I'm afraid I know nothing about Windows XP command windows, however.
I'm sorry not to be more helpful.
Kim Haase
Technical Writer
Sun Microsystems, Inc.

HT1212 I don't remember the password of my iphone. I restarted the phone with IOS 7. But I can't remember what the password was. Help me with my problem please.

I don't remember the password for my iphone 4. I restated it with IOS 7 and the iphone is disable.Please help me with that.

You will have to restore it from Recovery mode, as described in the tip you were reading when you posted your message. Or see: http://support.apple.com/kb/HT1808. You will lose all data on your phone.

Could someone help me with this code??

Hi!, I am really poor at Java, and was given this piece of code to fix. I have no idea why this compiles but does not run and have never dealt with packages either, so I would really appreciate it if someone could tell me what I could do to fix it!!
package Arrays;
import java.awt.*;
import java.awt.event.*;
*   This class demonstrates a simple application
*   A rather primitive ATM machine (needs work)
*   Quite similar to the CashRegister Applet
public class VirtualATM extends Frame implements ActionListener
     // the "screen"
     TextArea display = new TextArea(8, 20);
     // some local variables
     private String current    = new String("");
     private double amount     = 0d;
     private double balance = 5000.0;
     private int opCode;
     // op code constants
     static final int PINENTRY   = 0;
     static final int DEPOSIT    = 1;
     static final int WITHDRAWAL = 2;
     // button labels - an array
     String [] btnLabels =
         "1", "2", "3", "Deposit",
         "4", "5", "6", "Withdraw",
         "7", "8", "9", "New Customer",
         "0", ".","Enter","Quit"
* Default constructor
public VirtualATM()
     super();
* Constructor with frame title
public VirtualATM(String title)
     super(title);
     setSize(400, 400);
     // inner class to detect window closing and make sure
     // quit method is executed before exit, not vital in
     // this case but a good habit to get into
     addWindowListener(new WindowAdapter()
          public void windowClosing(WindowEvent e)
               quit();
     // set up the display
     int nButtons = btnLabels.length;
     Panel keypad = new Panel();
     keypad.setLayout(new GridLayout(4, 4, 5, 5));
     Button[] keys = new Button[nButtons];
     for (int i = 0; i < nButtons; i++)
          keys[i] = new Button(btnLabels);
          keypad.add(keys[i]);
          keys[i].addActionListener(this);
          keys[i].setActionCommand(btnLabels[i]);
     setLayout(new GridLayout(2, 1, 10, 10));
     display.setEditable(false);
     add(display);
     add(keypad);
     setVisible(true);
     startup();
* Check the button presses
public void actionPerformed(ActionEvent e)
     String command = e.getActionCommand();
     char com = command.charAt(0);
     // see if the character is part of a number:
     if ((com >= '0') && (com <= '9') || (com == '.'))
          doNumber(com);
     else
          // check here for function buttons
          switch (com)
               case 'D' :
               current = "";
                    deposit();
                    break;
               case 'W' :
               current = "";
                    withdraw();
                    break;
               case 'N' :
                    startup();
                    break;
               case 'E' :
                    processOperation();
                    break;
               case 'Q' :
                    quit();
                    break;
* This method prompts for a deposit
public void deposit()
     opCode = DEPOSIT;
     display.append("\nPlease enter amount to deposit: ");
* This method processes number button presses
* Could add PIN validation
public void doNumber(char com)
     current += com;
     if (opCode == PINENTRY)
          display.append("*");
     else
          display.append("" + com);
* This method does the processing!
public void processOperation()
     amount = toDouble(current);
     switch (opCode)
          case PINENTRY :
               display.setText("Please choose a transaction");
               break;
          case DEPOSIT :
               if (amount > 0.0)
                    balance += amount;
                    display.setText("Thank you, your new balance is: " + balance);
               else
                    display.setText("You cannot deposit " + amount);
               break;
          case WITHDRAWAL :
               if (amount <= balance)
                    balance -= amount;
                    display.setText("Thank you, your new balance is: " + balance);
               else
                    display.setText("You cannot withdraw " + amount);
               break;
* This method quits
public void quit()
     System.exit(0);
* This method sets up for a new customer
public void startup()
     display.setText("Welcome to Virtual Banking with VOB\n\n");
     display.append("Please enter your PIN: ");
     amount = 0.0;
     current = "";
     balance = 5000.00;
     opCode = PINENTRY;
* converts a string to a double
private double toDouble(String s)
     double theValue = -1.0;
     try
          if (s != "")
               Double d = new Double(s);
               theValue = d.doubleValue();
     catch (NumberFormatException n)
          current = "";
     finally
          return theValue;
* This method prompts for a withdrawal
public void withdraw()
     opCode = WITHDRAWAL;
     display.append("\nPlease enter amount to withdraw: ");
class main{
     * Initialises the Application
     * Creation date: (07-Dec-00 23:10:49)
     public static void main(String[] args)
          VirtualATM myATM = new VirtualATM("Virtual Overseas Bank");

That sounds like a path or classpath issue issue. There are some instructions here for windows systems...
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html
Basically you want to set your path to where your java.exe file is.
You can probably run it like this though (if you are in the dir where your ATM class is and you put the path where your jdk is installed):
D:\jdk1.3\bin\java VirtualATM
Here is the code, changed (note that this forum tends to screw up the code a little):
package Arrays;
import java.awt.*;
import java.awt.event.*;
* This class demonstrates a simple application
* A rather primitive ATM machine (needs work)
* Quite similar to the CashRegister Applet
public class VirtualATM extends Frame implements ActionListener
// the "screen"
TextArea display = new TextArea(8, 20);
// some local variables
private String current = new String("");
private double amount = 0d;
private double balance = 5000.0;
private int opCode;
// op code constants
static final int PINENTRY = 0;
static final int DEPOSIT = 1;
static final int WITHDRAWAL = 2;
// button labels - an array
String [] btnLabels =
"1", "2", "3", "Deposit",
"4", "5", "6", "Withdraw",
"7", "8", "9", "New Customer",
"0", ".","Enter","Quit"
* Default constructor
public VirtualATM()
super();
* Constructor with frame title
public VirtualATM(String title)
super(title);
setSize(400, 400);
// inner class to detect window closing and make sure
// quit method is executed before exit, not vital in
// this case but a good habit to get into
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
quit();
// set up the display
int nButtons = btnLabels.length;
Panel keypad = new Panel();
keypad.setLayout(new GridLayout(4, 4, 5, 5));
Button[] keys = new Button[nButtons];
for (int i = 0; i < nButtons; i++)
keys[i] = new Button(btnLabels);
keypad.add(keys[i]);
keys[i].addActionListener(this);
keys[i].setActionCommand(btnLabels[i]);
setLayout(new GridLayout(2, 1, 10, 10));
display.setEditable(false);
add(display);
add(keypad);
setVisible(true);
startup();
* Check the button presses
public void actionPerformed(ActionEvent e)
String command = e.getActionCommand();
char com = command.charAt(0);
// see if the character is part of a number:
if ((com >= '0') && (com <= '9') || (com == '.'))
doNumber(com);
else
// check here for function buttons
switch (com)
case 'D' :
current = "";
deposit();
break;
case 'W' :
current = "";
withdraw();
break;
case 'N' :
startup();
break;
case 'E' :
processOperation();
break;
case 'Q' :
quit();
break;
* This method prompts for a deposit
public void deposit()
opCode = DEPOSIT;
display.append("\nPlease enter amount to deposit: ");
* This method processes number button presses
* Could add PIN validation
public void doNumber(char com)
current += com;
if (opCode == PINENTRY)
display.append("*");
else
display.append("" + com);
* This method does the processing!
public void processOperation()
amount = toDouble(current);
switch (opCode)
case PINENTRY :
display.setText("Please choose a transaction");
break;
case DEPOSIT :
if (amount > 0.0)
balance += amount;
display.setText("Thank you, your new balance is: " + balance);
else
display.setText("You cannot deposit " + amount);
break;
case WITHDRAWAL :
if (amount <= balance)
balance -= amount;
display.setText("Thank you, your new balance is: " + balance);
else
display.setText("You cannot withdraw " + amount);
break;
* This method quits
public void quit()
System.exit(0);
* This method sets up for a new customer
public void startup()
display.setText("Welcome to Virtual Banking with VOB\n\n");
display.append("Please enter your PIN: ");
amount = 0.0;
current = "";
balance = 5000.00;
opCode = PINENTRY;
* converts a string to a double
private double toDouble(String s)
double theValue = -1.0;
try
if (s != "")
Double d = new Double(s);
theValue = d.doubleValue();
catch (NumberFormatException n)
current = "";
finally
return theValue;
* This method prompts for a withdrawal
public void withdraw()
opCode = WITHDRAWAL;
display.append("\nPlease enter amount to withdraw: ");
* Initialises the Application
* Creation date: (07-Dec-00 23:10:49)
public static void main(String[] args)
VirtualATM myATM = new VirtualATM("Virtual Overseas Bank");

HT5148 Hey everyone! Could someone help me with a problem please?

Similar Messages

Maybe you are looking for