HT5148 When I upload to Final Cut Pro X the video appears to lag as if individual frames are missing. Any suggestions or help???

help

Please give the exact specifications of the clips you're editing from the inspector. Please give the exact project properties of the project you're editing in.

Similar Messages

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • Final Cut Pro - Can the video move pre subframe?

    I recently have two videos. And I want want to synchronize these two videos. But I found that the video can only be moved pre frame and the sound of these two video cannot match perfectly.  So I detach the audio of the 2nd video and I try to synchronize my "1st video" and "the audio of the 2nd video" first. My "1st video" and "the audio of the 2nd video" match perfectly because "the audio of the 2nd video" can be moved pre subframe. However, "the audio of the 2nd video" and the "2nd video" itself don't match perfectly because the audio can be moved pre subframe  but the video can only be moved pre frame.
    How can synchronize everything perfectly?

    When you shoot with two cameras, if you want perfect synchronicity,  you must lock the video at the time of the recording by using cameras that allow for "gen lock" which uses the sync from either an independent sync generator, or the video of one of the cameras as a reference to lock the cameras together.
    More on Gen Lock here:
    http://en.wikipedia.org/wiki/Genlock
    Without an electronically locked signal, you have the result you are having.
    Within FCP, the audio can be moved at the subframe level, but not the video, which must be moved at the frame interval. In most editorial situations, the subframe offset of the cameras does not pose a problem, since the slight temporal shift will be masked by the dramatic image shift of the edit anyway, but I could see where it would be a problem in scientific, effects, or compositing work.
    MtD

  • When sending job from Final Cut Pro to Compressor using local QCluster

    When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
    If I use 'This Computer' it works fine.
    What gives?
    Fresh install of OS and FCS.
    Thanks!

    I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

  • FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!?

    FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!? It looks like it's rendering somthng but I just want it to stop flashing. I hope it didn't mess up the video...

    You're in totally the wrong place...  this is the Mac Pro (no Book) forum for hardware.  You want
    Final Cut Pro X: Professional Applications: Apple Support Communities
    Hopefully, FCP X has an autosave feature Like Final Cut Pro Studio so that you may already have a recent copy.  If I were in your shoes, I'd try an ESC or something similar before going to a Forced Quit.
    Good luck

  • Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"

    Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"
    The error message reads: We could not complete your request, please contact Itunes support to complete this option.

    You are almost there:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • When I try to upgrade final cut pro x, the app store wants me to buy a new version, why?

    when I try to upgrade final cut pro x, the app store wants me to buy a new version, why?

    Item
    Artist
    Type
    Unit Price
    O Brother, Where Art Thou? (Soundtrack from the Motion Picture)
    Write a Review Report a Problem
    Various Artists
    Playlist
    $5.29
    Final Cut Pro, v10.0, Seller: Apple Inc. (4+)
    Report a Problem
    Apple®
    App
    $299.99
    Subtotal:
    $305.28
    Tax:
    $24.73
    Order Total:
    $330.01

  • When trying to purchase Final Cut Pro X from the App store receive following error msg - There was an error in the App Store. Please try again later. (100) - Am running Quad Core Xeon w/ 32GB Ram, ATI Radeon 5870

    When trying to purchase Final Cut Pro X from the App store receive following error msg - There was an error in the App Store. Please try again later. (100) - Am running Quad Core Xeon w/ 32GB Ram, ATI Radeon 5870

    Try again later  .  .  .  .  in an hour or so, not immediately.

  • Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

    Hello, Please Help!
    When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
    Please Help!!!
    Edgil

    Make sure your easy setup has the correct frame rate for your sequence.  Seems crazy but somehow or other fcp assigns a frame rate to audio files.   I've found this can sometimes be tricky to get right.  Here's what I've done to force the issue.  Make sure the easy setup frame rate reflects that of the target sequence in fcp.  Create a new project.  import the audio in the new project.  And then copy the clip from the new project to your main project. 
    Good luck

  • Final Cut Pro X Exported Video Size

    I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube.  I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube.  There doesn't seem to be this option in Final Cut, so I've taken to using the YouTube share feature but it never uploads so I just manually upload the .mov file that it saves somewhere in the Final Cut shared files folder.
    The problem I have is that I export a 720P file so assumed that the video size would be 1280 x 720, it always was with iMove.  I've found that Final Cut spits out the video at 1248 x 702 and this is quite annoying as it sometimes cuts off the top and bottom of a video.  Is there any reason why it does this or any way to get it to export at the correct display size?

    How can I change the size? Normally I export at 720P in iMovie and the video and format are both 1280 x 720.  I did a screencast using Quicktime and due to the change in display size it's chopped off the toolbar at the top and a small portion of the dock.  I've had to resize the clip in Final Cut to 95% of the original size to get it to fit in the 1248 x 702 size that it chooses to put it in.
    As this was only a screencast the file size tends to be this small, but normally I shoot at full HD on my camcorder and the video can be about 10 mins in length.  I used the export media function and the resulting file was about 8GB in size!  iMovie would typically give me a .mov file anywhere between 700MB - 1.5GB depedning on the length of the video and that suited me fine, but there doesn't seem to be any way to get it that small using the Export Media.  Not much of a problem really coz I'm fine using the YouTube share option to get what I want.

  • Final Cut Pro Chooses The Hard Drive?

    Have been working for two days on a project.  The media is all on an external drive named LACIE VIDEO MEDIA.  Superduper did a backup to another external drive called Verbatim 2 this morning.  When I started up Final Cut Pro X this afternoon the event browser now thinks all my media is on the VERBATIM 2 drive and claims there are no events at all on the LACIE VIDEO MEDIA drive.  All the original files are still there on the Lacie drive!!!  Final Cut Pro X cannot see them?  How do I reconnect them?

    I was experimenting with external drives and found that FCPX would only see HFS+ formatted drives, not fat32, or ntfs.
    I had copied the Final Cut Projects and Final Cut Events folder from Movies to the root of the external drive using finder, started FCPX and it showed only the projects/events on the external drive.
    I removed those the folders from the external drive, and then used FCPX to duplicate the projects and events from the internal drive to the external drive and both showed up in the browser
    Strange.
    So, only use FCPX to move around your projects/event.

  • HT5103 Why can't you export on Final Cut Pro X the trial?

    I'm trying to export my video on Final Cut Pro X the 30 day free tiral but it is not allowing me to do so, why is that?

    Yes I have the project selected and when I hit share various options for where I want to share the video comes up so I hit one for instance the "Master File" I click on it and set my settings to quicktime and etc., then when I hit next it take me to a screen of where would I like to save the file at so I would put it on my extrenal hard drive. But when I got to check to see if it saved nothing is there. I tried to do Vimeo but nothing is there on Vimeo also.
    Can you save or export on the 30 day trial is that even a feautre?

  • Final Cut Pro X exports video clip as black

    Hi Everyone,
    I have a big problem, I'm trying to export a project with many HD clips, the first of which is the only one being shot as AVCHD on a Sony DSLR and converted to .mov by Voltaic HD because otherwise I can't import it in Final Cut Pro X. The rest of the clips are directly imported from another camera, no conversion.
    The first clip (the one I had to convert) plays and gets edited fine within FCPX, but after I export the whole project, all the part that had that clip is just black picture with no sound. My titles, photos in the meantime are still there, but otherwise all black until the next clips show up.
    The sources clips are hd1080p but I'm trying to export the project as 720p. My FCPX version is 10.0.9. I've edited videos from the same source and conversion before and never had this problem.
    So now I just took the same single clip into a new project and exported it at 720p and there it just works fine ... Arrrghh!! How can I fix this?

    I am having an almost identical problem:
    Trying to export (doesn’t matter to what: Master File, Apple Device, etc. all lead to the same result) the project I am working on is producing a black screen with no audio (for the length of the project) – only the start and end titles get rendered.
    The project plays fine in FCP X 10.0.9; the initial screen on the export dialog produces a correct looking screenshot (with both the picture and title visible), and predicts realistic sizes for the export file, which ends up being tiny by comparison.
    Other projects with a similar workflow are exporting fine: basically I have shot a couple of concerts, and each project is one song with start and end credits and some color correction, stabilization, etc.
    The source was 1080P video from a Canon SLR 5D Mark III, and it is being exported to 1080P -- however, I don't think that's relevant, because video from the same source to the same export files worked fine before - FCP X can obviously handle the format involved.
    I tried deleting the FCP X preferences -- didn’t help. I had already tried deleting the render files.
    Any ideas are greatly appreciated.

  • Cannot download Final Cut Pro from the app store

    Hello,
    I cannot download Final Cut Pro from the app store.
    I says "Failed to download" and error has occurred
    What is wrong?
    is it my Macbook?

    I had a problem way back in the olden days, i.e., FCPX 10.0.2, and finally gave up and called the Apple Store using a land-line phone.
    Anyway, (this was a couple years ago), if I remember right, they passed me off to someone in the FCPX group and I got the App. However, this was not a really goo way to go because for many updates afterward, everytime I wanted to update I had to go thorugh the same ritual.
    Finally, probably around 10.0.8, things got "fixed" and since then I've been able to go direct and download it from the App Store without having to make a phone call.
    My suggestion would be to try calling the App Store. Maybe, if there is a "global problem" and they get a lot of calls, they will fix it.
    Heck, maybe write a Knowlede Base (KB) article about it.
    Disclaimer: I didn't check to see if there was one.

  • I just purchased Final Cut Pro from the App Store and it will not download to my computer.  I try and install it from my purchases file but nothing happens.  Any suggestions?

    I just purchased Final Cut Pro from the App Store and it will not download to my computer.  I try and install it from my purchases file but nothing happens.  Any suggestions?

    If it's in the purchased page and doesn't download, you should contact Apple.

Maybe you are looking for