HT5167 what comes after system 10.5.8?

what comes after system 10.5.8?

First Check that your Mac meets the System Requirements for Snow Leopard..
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775

Similar Messages

I neglected to note what comes after the @ sign for e-print.

What comes after @ in eprint address?

Hi,
The address should end with @hpeprint.com
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

What comes after ISA

We're currently running ISA 2003. It does the job very well, but I'm aware we probably need to upgrade to one of the latest products. MS seem to have done their usual trick of confusing their product range. I understand that Unified Access Gateway 2010 is
the current model is this correct? And if so, is there anything else on the horizon that we should be waiting for?
We really use the system as a firewall for our network, proxy web services for users, VPN and virtual networks. We are looking at a new IP based telephone system that runs over VOIP lines and I assume this would support this functionality?
Can some also provide any resource sites to better understand it's functionality?
Thanks,

We're currently running ISA 2003.
There is no product known as ISA 2003, so I'm not really sure what you're running.
ISA Server 2004 Standard Edition (with SP2) is supported until October, 2014.
In October, 2006, Microsoft released ISA Server 2006, which is the first upgrade you should consider. It's functionally a drop-in replacement for ISA Server 2004. (Backup the config file, install ISA2006, restore the config file.) ISA Server 2006 is supported
until January, 2017.
As Vadims mentions, there is an additional generation of this product line, known as
Forefront Threat Management Gateway 2010, which was released in December, 2009. While it's true that the product has been "discontinued", what that means is that there won't be any *NEW* versions of the product released. It's still available, and is in
Mainstream Support until April, 2015, and Extended Support until April, 2020. If you're not ready to switch vendors, migrating to TMG2010 (and skipping ISA2006) is still an effective plan.
Beyond that, you've got about six years to identify an alternate firewall vendor. :-)
I understand that Unified Access Gateway 2010 is the current model is this correct?
Unified Access Gateway is a slightly different product. It's not a firewall, but rather a remote access solution, more robust than the RRAS that has typically existed in
Windows Server. However, even UAG is now being replaced by the new-and-improved RAS available in Windows Server 2012, specifically the Direct Access capabilities.
We are looking at a new IP based telephone system that runs over VOIP lines and I assume this would support this functionality?
No. VoIP services are provided by
Lync Server.
Can some also provide any resource sites to better understand it's functionality?
It seems to me that Microsoft.com/productName is probably the best place to start.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Is the portal "dead"? What comes after EP 6.0? Rumours...

In the last weeks I have heard quite a few times from other customers and also from more or less "internals" that there will be no new development on the Portal side.
I´m aware that EP 6.0 is supported until the end of the maintenance of NW 7.0, I´m also aware, that there will be an enhancement package (or more than one) until then but I think that question is still valid.
Minor improvements are made with each SP (or now enhX), so I see progress but I doubt seriously, that the EP 6.0 enhX will be followed by an EP 7.0 (or whatever it is called then).
I am wondering because
- there is no active development towards J2EE 5.0 (or higher) in the EP area (at least I´m not aware of any), Java 1.4.2 is completely EOL´ed at the end of the current month; as of today you won´t be able to use an operating system such as Windows 2008 to run a portal.
- there is no "preview" of any newer technology covering EP functionality as is there for other middleware products (e. g. PI 7.1)
- I "heard", that the applications framework (or better said: the Netweaver base (enhX)) will handle in some version the inter-system data passing themselves, without the need of a portal in the middle that takes the data from system A and pass it to an application running against backend system B.
It´d be very nice if someone could comment on that, is that all misinformation and/or false conclusions?
Markus

Good thing is the Portal is now heading towards becoming a collaboration portal with Web 2.0 elements like Blogs, Wikis, Forums etc. SAP would be partnering with Jive software to deliver this functionality.
You can have that today too - if you want to - without the need of deploying complex J2EE engines. It´s a nice-to-have but it doesn´t give any real business value. We didn´t gain a single u20AC more since we deployed the portal (if we focus on the "usage" of it) and Wikis won´t change that (not in our business - manufacturing). There are things like "public directories" in Exchange or even simpler shared filesystem directories that are much easier to handle and maintain as a Wiki, from a technical as well as a from a usage type of view. I appreciate that but for us it´s not of any use.
That's probably the biggest move SAP is making in the portal space. As far as your question of whether its dead, I don't think so as it would continue to be the strategic platform for Web delivered solutions.
If that is true, where is the roadmap? I heard a lot of people saying that exactly this is not true and this was the intention of creating this thread. You can get roadmaps for ERP enhancement packages, you get them for BI, for PI, for CRM and for SRM - where´s the portal?
Business Client is promising but definitely won't displace the Portal space. I think the goal of Business Client is to deliver more rich applications as its a client side install giving and gives an opportunity to leverage some client computing power.
What I have seen it´s more (as of now) a nice guide procedure frontend. Seriously, if I would take away e. g. the VA01 of our sales people (where most of them work with SAP and VA01 for 10+ years) and tell them to use NWBC instead, they would instantly kill me.
Markus

Long term planning: What comes after SAPGUI for Windows 7.20?

Is there more than
[https://service.sap.com/sap/support/notes/147519 Note 147519 - Maintenance strategy / deadlines 'SAP GUI'] saying:
You can be certain that as long as SAP supports any application based on Dynpro technology there will be a supported SAP GUI for Windows release.
Kind regards, Rudi

Hello Rudi,
after 7.20 7.30 will come
7.30 is planned for Q2/2012.
Regards,
Martin

Printer email domain (what's after the "@" sign)

I wrote down the first part of the email address for my printer, but the inf after the "@" sign went away before I could copy it. What comes after the "@" sign?

@hpeprint.com
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

TOC which account for what comes before it

I'm trying to create a TOC (Table of Contents) which can also account for what comes BEFORE it. (And not only the sections which follow it).Anyone has an idea?

Pages TOC will only index what comes after it.
You could perhaps add any prior items manually.
Peter

COM+ Event System failed to fire the StartShell and Logon method after installation of PM 1.43

Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!

Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Issue comes after resetting the password of SYSTEM user???

Hi experts,
if there is an issue comes after resetting the password of "SYSTEM" user id in oracle 10g, ECC6.0
ecc 6.0
oracle 10g
HPUx
Regards,
vivek

>> Using brtools you won't be able to change the password for database users like SYS and SYSTEM.
Are you sure about this? I am sorry but it is not correct. You are able to change these passwords by using brtools
Best regards,
Orkun Gedik

How Come, after updating to ios 6 iPhoto no longer supports photo streaming What happened?

How Come, after updating to ios 6 iPhoto no longer supports photo streaming? What happened?

You probably just need to re-enable Photo Stream. It's not clear what the difference is, but there is an option to enable Photo Stream (as well as Shared Photo Stream) in both the iCloud Settings and the Photos & Camera Settings.
-Doug

Stuck at "grey screen of death", disk I/O errors, Facility com.apple.system

Good morning everybody!
Yesterday, my MacBook Air revB crashed upon trying to open an mp4 video. I had to press and hold the power button until switch-off. After this, the machine wouldn't start in either normal or safe mode, but was stuck on the grey screen with the Apple logo and the spinning wheel. A start attempt in verbose mode revealed the error "[Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 6] [IOType Read]", occurring twice. After this, some normal startup posts appeared, but each after a very long time, and preceded by the name of my harddisk and "IO error". Therefore, the system hung doe to not being able to read from the disk what it wanted to read for start-up. I booted into single user mode and used the find command to search "com.apple.system.fs" from root. It was not found. I verified the find command by searching something else, and that was found. Now I renamed my User folder in single user mode and rebooted in verbose mode. The Facility com.apple.system.fs persisted, but afterwards the system booted normally, no chain of disk IO errors. I deleted the User folder that had been newly created due to renaming the old one, and changed the old one's name back to its original value. Afterwards, the system booted normally without any errors, including the "com.apple.system.fs" one. The S.M.A.R.T. status of the disk was and is "SMARTOK". In order to find this out, I opened the console, whereupon the system crashed again. Only after 20 min of 1 s-long windows of opportunity (when the beachball disappeared) was I able to force-quit the console by invoking alt-cmd-esc, and the system continued to respond normally. There are obviously corrupt log files producing the very same read errors that had originally caused the system to hang during boot. Does anybody now what is going on?
The best,

Hey there,
I reread your original post... The problem to me is that what you did to make it boot again doesn't make much sense. Nothing in your home directory prevents the system from booting.
You said that the system hung when you had Console open. Most of the log files shown there are in /var/log, /Library/Logs some are also in your User directory in ~/Library/Logs, you could try deleting everything inside...
Why renaming your home folder changed anything is a mystery to me. The only theory I have is general file system corruption that got repaired during one of those bootups due to an automated fsck. That or the system deleted and recreated invalid plist files.
Mac OS has important files in /Library and /System/Library. The ones in System belong to the System and are not supposed to be touched. The ones in /Library are open for Applications to add their own System-wide Configuration settings etc. The same structure exists in your home directory ~/Libary. Usually the most interesting areas in your home directory are ~/Library/Application Support and ~/Library/Preferences. However as I previously said nothing in your home directory would keep the system from booting. It would always go to the blue screen before the login screen would appear (even when you have auto login on).
Good luck!

User password problem in RFC after system copy

HEllo,
we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
Have you an idea to reimport succesfully these informations ?
Thanks
lionel

Hello,
We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
This are exactly way we perform it:
Before restoring DB :
export table via R3trans for tables:
RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
export users via scc8
Restore DB, truncate upper rfc tables, import rfc Tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
Import Users via transport generated by scc8
run scc7 as post actions
Tuncatate/re-import rfc tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
What else could be done ?
We have a lot of RFC. so re-enter all password is really a hudge task ..
Thanks a lot for help

J2ee engine does not start up after system copy

Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
        at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
        at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
        at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
        at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
        at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
        at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
        at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
Tajinder

Hi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name   : jcontrol
pid         : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments   :
    arg[00] : jcontrol
    arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    arg[02] : -DSAPSTART=1
    arg[03] : -DCONNECT_PORT=64380
    arg[04] : -DLISTEN_PORT=64381
    arg[05] : -DSAPSYSTEM=00
    arg[06] : -DSAPSYSTEMNAME=BD1
    arg[07] : -DSAPMYNAME=BWQAS_BD1_00
    arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    arg[09] : -DFRFC_FALLBACK=ON
    arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host    : BWQAS
-> ms port    : 3601
-> OS libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host    : BWQAS
-> ms port    : 3601
-> os libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm                  : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
        Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name       : bootstrap
-> node type       : bootstrap
-> java path       : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type    : <default>
-> java vm cpu     : ppc64
-> heap size       : 512M
-> root path       : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path      : ./bootstrap/launcher.jar
-> OS libs path    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class      : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable      : yes
-> debug mode      : no
-> debug port      : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder

Change logical system names after system copy

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

Hi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis.

What is whole system replacement

I have searched everywhere but I cannot find an explanation as to what this is so could someone please tell me what a whole system replacement is. I only know that it is a data recovery method. I also know that it is used after a disaster occurs in an
organization as part of their disaster recovery plan

Hi,
Yes, based on my knowledge, whole system replacement would mean if huge disaste happened to your system and you could no longer use it, then the whole system would be replaced for you.
In windows 7, you can backup your personal files and create a system image, which can avoid such disaster in case your system is damaged or you upgrade to other windows version.
More information about Windows Backup and Restore, please refer to these articles:
http://windows.microsoft.com/en-us/windows7/what-is-a-system-image
http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore
Andy Altmann
TechNet Community Support

HT5167 what comes after system 10.5.8?

Similar Messages

Maybe you are looking for