HT5172 USB hub to use

Which USB hub to use ?

There are so, so many USB hubs out there. You definitely want a powered hub, of course, and then you need to determine how many ports you need.
Just whistle over on Amazon and do a search for "USB powered hub" - I have one of these.
Clinton
Message was edited by: clintonfrombirmingham

Similar Messages

Good USB hub to use?

I was needing some input on which USB hubs are good for the MBP? Also, do they make a USB hub that plugs into the firewire port on the MBP?
Thanks

I use D-Link DUB-H7. It has 7 expansion slots, and the option to use an external power supply, though that 's not always necessary. I would use the external supply if the connected devices draw too much power.

How can I make my USB Hub Wireless using TimeCapsul

I have TimeCapsul and I use a 7-port Dynex USB hub. It has an external AC powersupply so it does not need to draw power from what it is plugged into. I would like to take advantage of what apple advertises that TimeCapsul can do, making my USB Hub wireless. However when I plug the hub into the TimeCapsul, the things i have plugged into the hub aren't available. Am i doing something wrong?

The USB port on the TC is used for a disk drive or printer. It doesn't make any other devices accessible. For disk drive or printer you must configure the TC using Airport Utility to share the device, and you need to turn on Printer Sharing and/or File Sharing via the Sharing preferences. Read the manual that came with the TC for configurations.

What is the best USB Hub to use with MBP?

Hello All,
I'm hoping someone can recommend the best and most reliable 4 way or better USB hub - Preferring self powered - for the Mac Book Pro.
I've tried a dick smith one and nothing seemed to work right on the mac.
Thanks
Brian Lord

Hi
Unfortunately we have not tested which other cables might do the job. Although it is not supported, the VIGOR 1120, has been tested for up to 200 ft; this other cable: USB 2.0 Hi-Speed Cable VE280306 has not been tested with National Insturmens USB boards but it seems it can handle USB 2.0 and 1.1.
I hope it helps
Jaime Hoffiz
National Instruments
Product Expert
Digital Multimeters and LCR Meters

USB Hub to use with my new iMac

Here is a quick question, looking for some opinions.
I just got my new iMac and I am switching from my Macbook Pro. since all the USB (and the other connections are all in the rear of the iMac, obviously makes it difficult to plug and unplug devices. Do may of you use a separate hub or some other solution?
Looking for some ideas to set it all up right. Thanks!
Mark

You have tons of options, the only real question is if you need your hub to be powered or not. (ie: plugging external HDs, etc.) If not, it's up to you & your preference of functionality & style.
For my desktop for example, I use a long single USB extention cable which ends in a stand so the port is sticking up. This makes plugging items in & out easy since it's an up & down motion, not forward & back. Most of my perifs are already plugged in so I only need one. For my laptop though, I have a smaller footprint item with x4 slots on it (unpowered).
I say go shopping & have fun.

Iodata GUH284R card reader / usb hub driver?

I just bought an Iodata card reader / usb hub to use with my new iMac. According to the manufacturer it works with OSX, but they don't provide a driver for for anything above OSX 10.2 on their web site. As a hub, it works great, but it doesn't seem to 'see' the memory cards. The cards are formatted in Fat16 by the camera. Is this a problem? This is my first Mac so it could be that I'm missing something obvious.
iMac G5 (Intel) Mac OS X (10.4.5)

I have a Sandisk card reader and I do not need any drivers to make it work. Normally OS X will detect those thinks without any additionnal drivers.
Have you tried it on another computer? Maybe the card reader portion is just not working.
I suggest you contact IOData support and ask them.

IOGear GUH 420 Firewire/USB Hub

I purchased this IOGear GUH420 Firewire/USB hub to use on my new MacPro 2.66 Intel desktop. Ever since I installed it, my firewire devices have been acting up and I couldn't ever figure it out. I was having lockups, spinning beachballs, monkeys flying out the floppy drive slot (oh yea, no floppy drive). Suffice it to say my new macpro wasn't acting right.
I did some research today and found out that some Firewire hubs do not like the voltage that comes from the new G5's and macPro desktops.
When I did the system profile, all my Firewire showed was Firewire 800/400 or the like. No devices, no hubs!
When I disconnect the IOGear hub and reboot... viola! Firewire in system profile shows all connected devices and everything runs much faster and I have zero errors!
So far, I would have to conclude that the IOGear hub is not compatable with the macpro, or mine has just been defective all this time.
Anyone else have issues with this hub?
Thanks,
matt caswell
http://www.thesabrehood.org

UPON FURTHER REVIEW
and extensive swaptronics....
The problem is not the HUB, it's the ADS Firewire 800 external drive case. It has 2 FW800 ports on the back and 1 FW400 port. I guess I assumed too much when I thought that I could chain a 400 device off the fW800 case.
When I connect ONLY the FW800 case to the MacPro, and do not connect any FW400 devices off the case, the firewire profile in system profiler shows everything as it should be.
I CAUSED THE PROBLEM AND NOT THE IOGear hub. I have posted my stupidity in case anyone was influenced by my previously incorrect assumption about the problem.
matt caswell

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can I use a USB hub to connect to multiple USB ports from one GPIB-USB-HS?

I have one instrument which has a GPIB-USB-HS connected and the USB cable is connected to a USB hub. Can I have multiple PCs to connect using USB hub at their respective USB ports? If so, how many PCs can I connect using the USB cable?
I have downloaded the latest NI-VISA from the website.
Solved!
Go to Solution.

You would first need a hub that allows you to switch between multiple pc's and then only one pc at a time would be connected and in control.
When you buy this special type of hub, one of the specs is how many pc connections it has.

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

That's not possible, it was designed to handle one device at a time.
I don't work for Cisco. I'm just here to help.

Best USB 2.0 Hub to use with iPods and Mac Mini 2009?

I am using my Mac Mini as my iTunes station, and I have five iPods
that are connected to my master iTunes Station.
Recently I needed to add a USB drive to add more space to the mini.
Along with a wireless keyboard ( that uses a USB transmuting dongle)
I am short two USB ports. Can anyone recommend a good USB hub
that is compatible with iPod Touch, iPod Mini, IPod Shuffle, iPod Classic 30GB,
and iPod Classic 160GB for iTunes synching and charging?

Anyone have any luck with this hub:
http://www.amazon.com/Belkin-USB-Plus-Port-F5U307-BRN/dp/B000NAXC6G/ref=sr12?ie=UTF8&s=electronics&qid=1282657682&sr=8-2
looks like the White Belkin one, but is on Amazon for about half the price, and
other than being brown, I don't see a difference?

Using USB hubs on airport express

I discovered that by using an airport express with the 802.11n network (most recent update model as of this post) is capable of using a third party USB hub for multiple printers. I have an all in one EPSON as well as a wide format EPSON and two DYMO thermal printers. All work fine using the Kensignton PocketHub 7-Port USB which includes an AC adaptor to power devices. I previously had an older Airport express on 802.11g network that could only handle a single printer and was NOT able to support the USB hub. I hope this helps anyone that is searching for network solutions.

Hi spwolfman,
Thanks for posting this, this is exactly what I was needed to know, as I need to make 2 usb-based printers wireless.
I have 3 addtional questions........
1) You mentioned you have a powered USB hub. Do you need a powered hub to make this work?
2) Are there any special settings that need to be made to get this to work, or is it straightforward in the airport setup utility?
3) I have a Linksys Wireless-G hub, will the 802.11n airport express work with this hub?
Thanks

Is it possible to use a USB hub on a new MacBook Pro with Maverickss?

I have used a powered Q-Store USB2 hub on first my old trust MacBook with the 13 inch screen running System X.6.8 for years; then I switched it over to my new 13 In. MacBook Pro (non retina) with Mavericks X.9.2 and it still works great. It is powered and seems to run a full load including USB hard drives, camera when wanted, cooling pad with fan, printer/scanner/copier combo, charging a MP3 player or Galaxy S4, apple mouse and keyboard, all with no trouble and no drop outs. I let an old Firewire 400 or 800 hard disk stay with my old Macintosh for now as it mirrors it, but sometimes hook it up with no problem except it gets hot.
I have a new USB3 WD Passport 3 hard drive and a 32 gb USB 3 memory stick. I wanted to put these on a USB3 hub and use one of the ports for the faster items. I can run either my WD My Passport 3 Gb drive that I use to mirror my internal drive as long as it is alone. I can also plug a 32 gb A Data memory stick in fine alone except things get a bit snug, and there's no more room on the USB 2 hub for the memory stick. If I do not use a hub for the one port I have to either use the Hard Drive or the memory stick, not both. I was using the memory stick to port files back and forth between my old and new computers at least for a while. The USB 3 peripherals work reliably when plugged in alone, but the moment a hub gets in the picture even if only one item is plugged into it, things drop in and out. It does not matter if it is the powered USB 3 hub or the non-powered Anker USB 3 4 port hub. The USB 2 items simply work but the USB 3 ones only work alone. I have looked at the power specifications. It seems like one hard drive uses all of the power the hub can put out.
It looks like the USB 3 is rather limited on Macintosh computers is all I can conclude. There may be extra speed, but what good is it if you can only run one peripheral at a time? It seems like even a hub stresses it unless it is a hub and a memory stick or two. I even changed to system settings to keep my hard drives from going to sleep, but still it drops out randomly if hooked to a hub and runs perfectly when plugged in directly. I had hoped to use it for an emergency start up disk if needed, though I must say the rather incredible StoreEdge Micro SDX card works great for that purpose and seems to belong.
That old USB 2 hub, even with a smaller one plugged in with 2 portable hard drives still works flawlessly on the other port and never drops out.
I have not tested the Firewire 800 port long enough to decide, except it gets hot if it reads very long.. The old Firewire 800 / USB 2 hard disk has more than one port on it unlike so many today. I had to use a Firewire 800 to 400 cable for my old computer. Anyway it works in either computer and stays mounted even when asleep.
Is it possible to use a USB 3 hub with more than one peripheral on a 2012-2013 13 inch MacBook Pro computer with Mavericks? If so which one works? It cannot be good for hard disks to randomly disconnect and reconnect without being dragged to the trash.

no you can't - you have to upgrade it to 16GB yourself.
you can get your RAM from newegg.com, macsales.com.
the RAM you need is 16GB (8GBX2) DDR3 1600MHz DDR3.
upgrading the RAM yourself will not void your warranty.
you need a #00 Phillips Screwdriver - 10 screws at the bottom - 7 long ones and 3 short ones - just remember where they go when you put the screws back in.
a simple 10 minute job.

Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
The printer connects to the Airport Express through a USB hub and is recognized. I cannot get the scanner nor either of the back up drives to be recognized. Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro? If it is possible, can you walk me through the set up for each?
Thanks,
Doug Earle

I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
It will not work with a scanner, copier, or hard drive.
It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

Could I use a USB hub to connection both a printer and an external hard drive to the time capsule?

I am planning on purchasing a new router. The Time Capsule looks amazing. However, I have Macs and PC's in my how. So, I need to know if I can connect a printer (for all computers) and external hard drive (for the PC's) by way of a USB hub on the Time Capsule. I've read that you can do this with the Air-Extreme.

Couple of comments:
You will need to use a powered USB hub to connect multiple devices to the USB port on the Time Capsule
The hard drive for use with the PCs will not be compatible for use with the Time Capsule if it is currently formatted for Windows NTFS, which it likely may be if you have been using with the PCs.
Same info applies to the AirPort Extreme.
The following hard drive formats would be supported:
Mac OS Extended (Journaled)
MS DOS FAT32

HT5172 USB hub to use

Similar Messages

Maybe you are looking for