HT5177 Use of AVHCD 2.0 (1080p 50/60fps) in FCPX ? ...no support...

How to best use AVHCD 2.0 (1080p 50/60fps) in FCPX ? FCPX/imovie/Aperture/(OSX ?) don't support the format natively, so how to best/fastest/costeffective to convert AVHCD2.0 files to the best/highest quality format used in FCPX ?

Downloaded a trial of clipwrap.....shall i just "rewrap...dont alter video samples" ? And do i keep full quality in this way ?
I have tried Aunsoft Final Mate and Toast Titanium, converting to apple prores HQ.....do you have any idea what is best to use ?

Similar Messages

What QT7 settings do I use to export a 1080p video for playback on iPhone4? I'm using the iPhone to playback 1080p video on 1080p monitor. Is this possible?

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
I have previously saved my .mov file as Apple TV, but the quality is reduced from 1920x1080 to 960x540. I was unable to sync the higher quality file to my phone (and am worried this is the limitation of the hardware). I added this file to iTunes, added to a playlist, and sync'd to my iPhone. The playback works but the resolution is obviously a lower quality.Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device? Thanks in advance to your answers.

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
No. Only the iPhone 4S, iPad3, and TV3 currently support 1080p30 content. Even then the 1080p30 playback support for your monitor may depend on how the device is connected. The iPhone 4 is limited to 720p30 playback.
Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device?
Not on your current device. As previously stated, the latest generation of iPhone, iPad, and TV devices support a maximum 1080p30 playback capability but may be limited to lower resdolutions depending on your method of connection to your monitor. This information can be found on the Apple web site TechSpecs page for each respective device.

Print to PDF - using Snow Leopard (Saving a PDF file when printing is not supported. Instead, choose

i have a PDF form that i created that is used as a custom proposal that my company sends out to potential clients. the form in its editable state is only used internally. we recently upgraded to snow leopard, but prior to the upgrade, we were able to fill the custom proposal form out using adobe reader, and, as you well know, we weren't able to save that edited document as a PDF with the custom form fields filled out. our work around using adobe reader was to print to a pdf using the adobe pdf printer in the printer dialog. with the addition of snow leopard, however, instead of choosing the adobe pdf printer, we were to choose PDF from the bottom left corner, then Save As PDF, and it would spit out an uneditable pdf that then allowed us to email it to the potential client without them being able to edit it as well as have an internal, digital copy for our records instead of having lots of paper floating around (i know this is also doable using security that disallows the client certain editing privileges, but printing to a pdf is much quicker and more efficient, and the pdf security isn't really that secure at its best).
in any case, i came across this gem of a post here on the support forums that installs another option from the PDF drop down on the bottom left of the print dialog menu that reads Save As Adobe PDF and is supposed to do exactly what i am trying to get it to do...print to a pdf file from adobe reader.
http://kb2.adobe.com/cps/509/cpsid_50981.html
once i updated to acrobat 9.2 (as the link above suggests 9.1), however, the Save As Adobe PDF does appear in the print dialog menu, but it still gives me the same error that acrobat 8 - 9 gave me while using Snow Leopard — Saving a PDF file when printing is not supported. Instead, choose File > Save — and as i've already explained, you can't save an edited pdf form in reader (as i am the only one in the office with acrobat) and still keep the fields as you've entered them in. the only work around is to print to a pdf but is apparently having some recent problems.
using acrobat, however, i know that i can save the editable pdf as a new file with the fields customized as i have left them, but it still saves it as an editable pdf and the print to a pdf option still remains the best option...that way we have digital copies internally that are uneditable that can be printed at any time or emailed to the client.
how can i do print to a pdf, based on what i've written above, using snow leopard and acrobat and reader?

A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to use application builder to generate installation disk without compiling the the support files?

Hello,
What I am trying to do is to use LV application builder generating an installation disk without compiling the support files. I mean:
the support fils like the help files are located on a different directory , for example, installation disk is D drive, help file directory is: D:\Help\..., not compiled in the installation Data set.
So, when the installation disk is running, it only copy this directory file into the destiny directory. Of course, we can write a different bat file to do this. However, beside this method, is there any way, like using LV application builder to do this without writing a batch file. Any suggestion will be appreciated.

For LabVIEW 7.1, this can be done in a few short steps. First, add your help file as a support file in the Application Builder. Then go to the Installer tab, choose to create an installer and click on the Files button at the bottom. From this dialog (shown below), you can specify the destination for each component in your install package. If you have added your help file as a support file, it will show up in the Files in Installation list. Click on your help file to highlight it. You can now choose where to install the file to by specifying an installation destination and a subdirectory. The default subdirectory is called data, but if you want to change that, just type in a new subdirectory name as I have done below:
Hope this helps!
Message Edited by Jarrod S. on 01-23-2006 10:17 AM
Jarrod S.
National Instruments
Attachments:
Support Files.JPG ‏31 KB

"You are using a browser (SAFARI 4.0.4) that is no longer supported"

I have a iMac (20-inch, Early 2009). I am currently running Yosemite OS X 10.10.2, and my Safari is the Version 8.0.4 (10600.4.10.7). My question is this, when I log into various secure accounts I get the following message "You are using a browser (SAFARI 4.0.4) that is no longer supported by its vendor. Beginning in October 2014, PenFed will no longer support this browser version. You are strongly encouraged to update your browser to ensure your data is protected while using the Internet."
Since the Lion release. all my updates have been on line through apple. Any thoughts and advice?
Thanks
<Re-Titled By Host>

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Every time I use my apple id to sign in other than on apple support or iCloud i get an unknown error has occurred. either 5002 or -52.

Every time I use my apple id to sign in other than on apple support or iCloud i get an unknown error has occurred. either 5002 or -52.
I just replaced my harddrive and reinstalled the os x

specifically on icalender, itunes, and the app store

I have bought used iphone 3g but it is saying the carrier does`nt support what should i do ?, i have bought used iphone 3g but it is saying the carrier does`nt support what should i do ?

i have bought used iphone 3g but it is saying the carrier does`nt support what should i do ?

Return it for a Refund... If you can...

How to import 1080p from SD600 to FCPX?

From Malcolm How can I import 1080p from SD600 to FCPX?

Hi Ian,
So, if I have one SD card & it records only in AVCHD set at 1920 x 1080 @ 50p, FCPX should be able to import it, right ? (I am still on FCPX 10.0.4. Or must I upgrade my FCPX to 10.0.5 ?)
Thanks
Ian R. Brown wrote:
Sorry, I didn't notice that you meant the 1080/50p type.
As long as you have the latest version of FCP X, you can also import these.
However, here is the catch.
They must not be mixed with normal AVCHD on the same card.
So in future, if you want to import them easily, keep one card for AVCHD and another for 1080/50p.

Can I use 4k footage in a 1080p sequence, then export 4k without resolution loss?

Hi,
I cut a 1080p sequence using 4k footage that I scaled down in the Effect Controls window. If I export that sequence as a 4k file, will Premiere compress that original 4k footage to 1080p, then expand it back to 4k in the exported file (please say no)? Or is Premiere intelligent enough to interpret the export scaling using the size of original footage, rather than the sequence size? (Hope that makes sense)
Of course it's wise to create a sequence based on your delivery requirements, but sometimes clients change their mind and I don't feel like rescaling every damn clip. But thanks for the advice
Thanks!
David

Premiere will export to the settings of the timeline / sequence you've created. It doesn't matter what formats you've used withing that timeline. So if you use 4k in a 2k sequence, Premiere sees it as a 2k sequence and, without user intervention, will export at that format.
Obviously you can up-scale during export but i) why would you want to do that when you've previously down-scaled and ii) anything above 100% magnification will begin to pixelate.

Flash using one core with Youtube 1080p videos.

When I play a video on Youtube in 720p the activity monitor shows that the flash plugin uses about 150% of my cpu on a dual core mac mini. Now if I try to play the same video in 1080p the activity monitor shows that the flash plugin always stays at 99% and of course the video looks very choppy. This happens with both Safari and Firefox and with every single 1080p movie I have tried so far. I tried reinstalling flash but that didn't work. Any ideas?

HI,
You need to UNinstall the current Flash Player plugin BEFORE reinstalling a new copy.
Uninstall Flash
Install Flash
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Since you are running Snow Leopard, *make sure Safari is running in 32-bit mode, not 64*. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure *Safari is NOT running in Rosetta.*
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and *restart your Mac.*
Carolyn

Import avhcd full hd 1080p

Hello,
I've purchased a Sony camcorder HDR-CX160E which is capable of filming avhcd full hd resolution 1920x1080 at 50 frames per second, 50p. When i start a new project in Premiere Elements 9 i only have the option to select avhcd full hd resolution 1920x1080 at 25 frames per second, 50i. A little test proved that i can import material filmed at 50p from my sdhc card but i'm afraid that i won't be able to export it to blu-ray properly. As i don't have a blu-ray writer yet, i can't test it. Does anyone have any experience with importing 50p material in Premiere Elements 9 and exporting it to blu-ray? I'm completely new to Premiere Elements as i used to work with Pinnacle Studio in the past. Thanks in advance.

Hello,
I'm not certain.
Here is some information from the Sony site for this camera:
On page 36 of the manual the recording modes are explained and there is this line: [PS] can be set only when [ Frame Rate] is set to [50p].
http://pdf.crse.com/manuals/4271479111.pdf
Filmresolution
HD: 1920 x 1080/50p, 50i (FX, FH), 1440 x 1080/50i (HQ, LP) STD: 720 x 576/50i
Film recordingspeed (average bitrate/VBR)
HD PS: circa 28 Mbps/FX: circa 24 Mbps/FH: circa17 Mbps/HQ: circa 9 Mbps/LP: circa 5 Mbps

1080p movies using camera kit to iPad., 1080p movies using camera kit to iPad.

How can I get my 1080 film from my camera using camera kit onto iPad

I am using the camera connection kit USB adapter. Can't use the card reader because the camera doesn't have an sd card only internal memory. I have a gut feeling that the camera is trying to charge through the USB port (which is where it charges from) but the Ipad is showing that message because maybe something isn't set right on the camera. Thanks for the help though. Any further thoughts/ideas would be appreciated.

Anyone with experience using mountain lion to download 1080p from sony cameras

I just found out that if I upgrade to Mountain Lion I can import to imovie 11 which I also need to download and iphoto 11 in full 1080p .   This may work
with any sony camera that will not bridge to Snow Leopard or Lion.   Anyone doing this,   can you edit movies in imovie.   And If you are doing this
how is the quality.   Need to know very soon. thanks

I upgraded to Mountain Lion and now my computer is unable to import from Sony cameras.. I am quite frustrated and hope to hear from Apple on this soon.

Using a Mac Mini Server quad Core i7 for FCPX ?

I am a student trying to
configure a final cut pro X edit system with a budget of around $4K.
I have over 400 hours of video (some Hi-8 but mostly mini-DV tapes).
For the Mini-DV tapes I plan on ingesting video into FCPX
directly from the camera via firewire DV. I will be using a Sony GV D800 to ingest
the Hi-8 tapes via firewire DV as well. I already have a 30" Apple Cinema Display.
H.264 will be used to deliver finished content to the web and/or Blu-ray.
I was leaning toward the macbook pro 17" but then I realised that a Mac Mini Server
could be configured with the same number of cores and RAM for less money.
Mac mini Server
2.0 GHz Quad Core Intel i7 -- same number of cores as macbook pro 17"
8 GB RAM
750 GB Serial ATA Drive 7200rpm + 256 GB Solid State Drive
Mini DisplayPort to Dual-Link DVI Adapter
Apple Magic Mouse + Magic Trackpad
Other Peripherals:
Promise Pegasus 8TB R4 Raid System in RAID 5 configuration or equivalent
Sonnet Echo Express PCIe 2.0 Thunderbolt Expansion Chassis with
Matrox Compress HD MAX encoding card
LaCie d2 Blu-ray 12x
Do the extra cores in the server make up for the difference in GPU?
(2.7 GHz Mini dual-core i7 with AMD Radeon HD 6630M graphics processor with 256MB of GDDR5 memory) VS (2.0 GHz Mini Server quad - core i7 with Intel HD Graphics 3000 processor and 384MB of DDR3 SDRAM shared with main memory)
Am I thinking about this configuration the right way? Is there
any overhead given that the mini will be a server? Anything missing?
thanks for your help,
Tom

Take it back for a replacement while you are within 14 days from purchase.

HT5177 Use of AVHCD 2.0 (1080p 50/60fps) in FCPX ? ...no support...

Similar Messages

Maybe you are looking for