HT5182 I wonder if iPhoto supports the new Sony DSC-RX100 II camera.

I wonder if iPhoto supports the new Sony DSC-RX100 II camera. I know it is not supported by Aperture. Can anyone help please?

It's the system that supports the RAW formats. So if Aperture doesn't support it neither will iPhoto.
You'll have to wait until a new Digital Camera RAW Compatibility Update is issued by Apple for the camera.
OT

Similar Messages

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The wrong lens F3.5/6.3 profile is checkmarked and I can not find the new RX10 Sony 70-200 F2.8 G SMM11 profile. The meta data in the Library module correctly list the Sony RX10 and the Correct lens.
How may I select the correct lens profile for my Sony DSC-RX10?

Ask in the PS/ LR/ ACR forums
Mylenium

HT4757 When will Apple iPhoto/Aperture support the new Leica V-Lux 4 camera RAW format ?

I just bought a Leica Vlux-4 and found that the current verisons of Aperture and iPhoto do not reconize the RAW files like they do for earlier versions and all of the Canon & Nikon DSLR's. I see from the support doc that Apple supports the Vlux-1 and 2, so when will RAW support be added for the Vlux-4 ?
I dont want to move to Lightroom but it already supports the Vlux-4 camera !
Thanks.

while this all may be true,
it is all speculation, and we are not supposed to speculate here; Apple does not publish the reasons for missing raw support, and for the Vlux-4 it is early days yet. There may very well be a raw update including your camera soon.The only difference I see, is that the the Vlux-1 & 2 did not come with Lightroom included, only with PSE, and the support stopped, when Lightroom was included - the direct competition to Aperture.
Send feedback to Apple to let them know!
Regards
Léonie

Will Element 13 support the new Sony A7 II Camera in RAW?

I recently purchased the Sony A7 II and my old LR does not recognize the files produced by this camera. I want to purchase Element 13 but before I do I would like to know if I it will work? Thank you in advance for any help.

Yes, pse 13 will support that camera.
After you install pse 13, you would just have to go to Help>Updates from within the pse 13 editor to get camera raw 8.7.1, which has support for your camera.

Will FCP support the new Sony V1U

I'm considering buying the soon to be released Sony V1U. Does anyone know if this camera will be supported by Final Cut right away or will we have to wait for NAB for an update?
Thanks,
Anne

Might need an update to work directly with captured files and all formats it shoots (unless it uses the same protocols that the XDCAM stuff does). Sony says that if you have their HDV devices (deck) you can play thru to it apparently in it's literature. Meaning you can capture it during a playback from the camera I guess. It does record to tape too, right? Sony:
In addition to typical 60i, the HVR-V1U offers 24p/30p progressive scan capture, enabling cinema and drama productions in its compact yet high performance unit. The camcorder also adopts the world's first 2-3 pull-down HDV recording system for storage of the 24p scanned images, keeping your existing HDV1080/60i HDV gear in action. Playback your 24p/30p scan footage using Sony HDV equipment you already have at hand, or feed it to a compatible Non-Linear Editing (NLE) system without changing your HDV deck or monitors - it’s as simple as that."
I'd not be the first on my block to buy one before they are in circulation and someone with first hand experience has reported that there's no hitches...
Jerry

New Sony DSC T900 Camera Advice

This is my first post on the Apple forums although I have read many post on here from others and found it a very useful and informative place to learn, I am also to fairly new to Final Cut also making the transition over from iMovie 08 so please be patient with me, thanks.
I hope the links work I have inserted have and I have given enough information to you all to try and help.
My system is a iMac 24 inch Intel 2.4GHz processor with 1 GB of memory
Here go's, my query is about the new Sony DSC T900 still and video camera that I have recently purchased, I have shot a 15 minute 1 GB HD movie in 1280x720 widescreen on it with a Sony pro duo 8 GB AVCHD memory stick, which is formatted to MS Dos(Fat32) according to the Apple info tab and is "as is" when i purchased it.
I can not find much out about this camera on other forums as it as only just come out from Sony I think.
The camera uses a USB docking station to connect it to the computer and I am using a
2 terabyte Western Digital external hard for media storage which is formatted in Mac OS extended journaled and set as my scratch disk storage
My question is how or can I upload direct into Final Cut Express 4 HD from this camera using USB connection, I have all the setting correct I think in F.C for my system and camera, and also have Tom's book for reference which I have found very very useful but I am not having any luck, after trying numerous things to get the footage into F.C. I can easily load it into iMovie 08 and export as an XML file and I can use import in F.C direct from the memory stick but when I try any other methods in Toms book i have no luck.
Are there any advantages or disadvantages to any of these methods I have used so far as opposed to the likes of Log & Transfer and which should I use if it is possible to to achieve the best results and to retain the best quality of the footage in the final rendering of the movie.
If anybody can help and needs more information to help I will post further details so please just ask.
Thanks in advance
Guy
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/CodecSettings.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/SystemSettingsMemoryCache.pn g[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/SystemSettingsPlaybackContro l.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/SystemSettingsScratchDisks.p ng[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/SystemSettings.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/UserPrefsEditing.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/UserPrefsGeneral.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/UserPrefsRender.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/UserPrefsTimeline.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/Memorystick.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/MovieSize.png[/IMG]
[IMG]http://i560.photobucket.com/albums/ss45/FinalCutGuy/Movieimagesize.png[/IMG]

Welcome to the forum!
FCE can only capture or ingest DV, HDV, or AVCHD directly and can only edit DV, Apple Intermediate Codec, or some other Quicktime formats natively. I don't believe the footage taken by this camera meets any of these specifications. You should first convert the footage taken on your camera using [MPEG Streamclip|http://www.squared5.com> to a format FCE understands.

Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?

The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08. You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
iLife 08's full system requirements are:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
iDVD ’08 requires 733MHz or faster processor
512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
3 GB of available disk space
DVD drive required for installation
From: http://support.apple.com/kb/HT1010
OT

I CAN NOT open Iphoto with the new Mavericks????

I can not open Iphoto with the new Mavericks, I changed Dutch for English but stil nothing ....

Hi Kevertjes,
Thank you for the update. I recommend verifying that you are signed in with the same Apple ID associated with or used to purchase iPhoto on the App Store under the Store menu.
If you are signed in with an alternate Apple ID, I recommend signing out of the App Store, signing back in with the correct Apple ID, and then trying the update again:
Sign out
Choose Store > Sign Out.
Sign in using an Apple ID
Choose Store > Sign In, or click Sign In in the Quick Links section. The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
Enter your Apple ID and password, and then click Sign In.
Mac App Store: Sign in and out
http://support.apple.com/kb/PH11499
All the best,
Sheila M.

Is there a plug-in to support the new Canon 7D mark 2 raw files?

Is there a plug-in to support the new Canon 7D mark 2 raw files?

Native Lightroom support for the D750 was added in the Lightroom 5.7 update released this evening.
Release details:
Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html

HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

What are the new sony phones which support flashlite 1.1?

Hi friends,
Can you please tell me that what are the new sony phones
which support flashlite 1.1?
and which have wallpaper etc. in flashlite.
regards
vivek

Here
it is a link in this very site!!!

Where is the event options in iPhoto with the new iOS 7 update on iPad?

Where is the event options in iPhoto with the new iOS 7 update on iPad?

You mean iPhoto the app or the native iOS Photos app?
I have both in my iPad running iOS7 and iPhoto has the Events as usual.

From which verison of oracle support the :NEW variable in trigger

A trigger using the :NEW variable can be compiled in oralce 10g but can't in oracle7 .
Does oracle 7 support the :NEW variable?

>
A trigger using the :NEW variable can be compiled in oralce 10g but can't in oracle7 .
Does oracle 7 support the :NEW variable?
>
You can answer questions like this yourself by always checking the documentation first.
NEW is not a variable, it is a correlation name.
See 'The Trigger Body' section in the Oracle7 Server Application Developer's Guide
http://docs.oracle.com/cd/A57673_01/DOC/server/doc/ADG73/ch9.htm
>
The Trigger Body
The trigger body is a PL/SQL block that can include SQL and PL/SQL statements. These statements are executed if the triggering statement is issued and the trigger restriction (if included) evaluates to TRUE. The trigger body for row triggers has some special constructs that can be included in the code of the PL/SQL block: correlation names and the REFERENCING option, and the conditional predicates INSERTING, DELETING, and UPDATING.
Accessing Column Values in Row Triggers
Within a trigger body of a row trigger, the PL/SQL code and SQL statements have access to the old and new column values of the current row affected by the triggering statement. Two correlation names exist for every column of the table being modified: one for the old column value and one for the new column value. Depending on the type of triggering statement, certain correlation names might not have any meaning.
A trigger fired by an INSERT statement has meaningful access to new column values only. Because the row is being created by the INSERT, the old values are null.
A trigger fired by an UPDATE statement has access to both old and new column values for both BEFORE and AFTER row triggers.
A trigger fired by a DELETE statement has meaningful access to old column values only. Because the row will no longer exist after the row is deleted, the new values are null.
The new column values are referenced using the NEW qualifier before the column name, while the old column values are referenced using the OLD qualifier before the column name. For example, if the triggering statement is associated with the EMP table (with the columns SAL, COMM, etc.), you can include statements in the trigger body similar to
IF :new.sal > 10000 . . .
IF :new.sal < :old.sal . . .
Old and new values are available in both BEFORE and AFTER row triggers. A NEW column value can be assigned in a BEFORE row trigger, but not in an AFTER row trigger (because the triggering statement takes effect before an AFTER row trigger is fired). If a BEFORE row trigger changes the value of NEW.COLUMN, an AFTER row trigger fired by the same statement sees the change assigned by the BEFORE row trigger.
Correlation names can also be used in the Boolean expression of a WHEN clause. A colon must precede the OLD and NEW qualifiers when they are used in a trigger's body, but a colon is not allowed when using the qualifiers in the WHEN clause or the REFERENCING option.
The REFERENCING Option

Does FCP support the new Panasonic AVC Intra codec?

Does FCP support the new Panasonic AVC Intra codec?
NOT AVCHD but AVC Intra?
Will it require more rendering or converting before I can use it?
I am looking at buying the HPX-2000 with the new AVC Intra board, recording to P2. AVC Intra is H.264 codec.

I don't think this is supported yet.. but the camera's ability to shoot DVCPROHD certainly is.
Jerry
Message was edited by: Jerry Hofmann

How can i open iphoto after the new update OS X 10.9.2 (13C64) i keep getting this mac can not open this application.

How can i open iphoto after the new update OS X 10.9.2 (13C64) i keep getting this mac can not open this application.

This screenshow shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
OT

HT5182 I wonder if iPhoto supports the new Sony DSC-RX100 II camera.

Similar Messages

Maybe you are looking for