HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?
My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?
Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.
Similar Messages
-
I messed with basically everything in the Display Settings and Phone Settings, trying to get it back to the same display I had on my old phone. But now it won't do anything?
I literally just bought it and activated it within the last 30 minutes. If someone has an idea as to what I did, that would be great. Thanks so much in advanced.Let's get your phone back to work as intended pronto cowsbark! Please contact our prepaid customer service team at 888-294-6804.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport -
I have been using my apple TV seamlessly with all my apple products (Mac Mini, iphone, MBP, ipad). Everything worked perfectly until recently (I noticed the issue about 3 weeks ago), when the apple TV won't load and play any movies from my iTunes library located on my MBP. The Library loads, and I can see everything, but as soon as I press play, the spinning load icon appears and doesn't stop. Same when I play movie from itunes directly and send it via airplay. Desktop mirroring no problem.
I have checked, and films are being played perfectly from my other devices, as does airplay and mirroringHello Tourneurm,
Thank you for contacting Apple Support Communities.
This article might be of use for your issue.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Section 8 seems to be most applicable.
8. Cannot access my library when my computer is asleep
For Apple TV to access your library while the host computer is asleep, "Wake for network access" must be turned on.
Open System Preferences > Energy Saver and select (enable) the "Wake for network access" option.
In addition, the network that the host computer and the Apple TV (2nd or 3rd generation) is connected to must support Wake on Demand feature. This works by partnering with a service running on your AirPort Base Station or Time Capsule called Bonjour Sleep Proxy.
This article could also be of use.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
Regards,
Jeff D. -
Nothing comes up in the airport utilities app either. The amber light continuously blinks. I also tried connecting an ethernet cord.
We have a netgear n150 router in our house as well but it doesn't connect to my phone or MacBook. That's connected to a Windows PC.
Is this Netgear router your "main" wireless router? That is, is it connected directly to the Motorola modem by Ethernet? Which exact model of the AirPort Express do you have? How do you have the Express configured to work with the Netgear? -
I can not join my Apple extreme with the Apple express. I shows a conflict in the network! I've tried everything. How can they join on the same network?
It says that my DHCP has to be changed! How? to what?
It is 802.11g.express. but is set to default by the computer (Macbook Air).
The other is 802.11n. (express)
Extreme is 802.11.g. Is the Main Airport.
It is on ethernet & wep 128 security. -
I ipod touch is not showing up on my computer when I plug in to update and download audiobooks.
Hey khdewey,
Thanks for the question. I understand you are experiencing issues with your iPod touch being recognized in iTunes on your Mac. The following resource may provide a solution:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
1. Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
2. Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
3. Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
4. Disconnect other USB devices and connect your device directly to a USB port on your Mac.
5. Restart your Mac.
Additional Information
In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens and you're using Mac OS X v10.6 Snow Leopard, please follow these steps.
Thanks,
Matt M. -
I have an iPod Touch 3rd gen and while it is recognized by my laptop with Win 8.1, it won't sync with iTunes. It worked fine while my laptop had Win 8 but after the update, it quit syncing. Strange though, I downloaded an app directly to my iPod and when I connected it to my laptop again (for recharging if nothing else), iTunes updated itself by including the new app. I also tried syncing wirelessly. Also unsuccessful. I'm about ready to change to an alternate to iTunes if I can't get this situation fixed. Anyone else have this problem and/or a solution?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
So, I just had a bit of a hurried train journey, two connections very close together, resulting in my laptop bouncing around a bit inside my bag (in a case). The Macbook was shutdown the entire time, but when I tried to start it up it came up with a flashing folder with a "?" in the middle of it after the start-up "bong".
I proceeded to remove the hard drive to check if it was okay, and it worked fine via USB into my iMac, so I am now running my Macbook Pro from a hard-drive that is completely naked outside of its shell.
What could have gone wrong other than the hard drive, bairng in mind that it is all working perfectly well with the hard-drive plugged in via USB. I was thinking it could be the ribbon cable that connects the hard-drive internally, however I had this replaced not long ago after a previous complete hard-drive failure, but that's a story for another time.
If anyone could help I'd be very appreciative, as my macbook looks ghetto as all **** right now, as I have the hard-drive sellotaped to the left of my trackpad.If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
Using Apple Hardware Test to troubleshoot a hardware problem
Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold the D key on the keyboard before the grey starting screen appears.
Continue to hold the D key until the loading screen shows up. You should see a globe.
When AHT has loaded, select your Language and then press the Return (↩) key.
Select the Perform Extended Testing checkbox located under the Test button.
Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
Report any issues it shows in a reply.
I hope I helped. -
I transfered all my games from my iphone4s to my ipad, but the game progress is lost.... I signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???
Hi bubbles213,
The best way to move information from one iOS device to another is to back up the device using iCloud or iTunes (or both), and then restoring the new device from it. This article will walk you through the steps:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Cheers,
- Judy -
Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
ThanksActually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks -
Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB
Are you following these instructions?
http://support.apple.com/kb/ht4796
Have yo tired by connecting both to same network vice direct ethernet connection?
There is no direct USB connection -
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?
Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.
Try downloading the driver directly from Canon's web site.
-
Why wont my Tv Show Download? it only says "download error. tap to retry" and tapping doesnt work it just keeps on saying the same thing.
It appears in the download section of my itunes.
I downloaded a season of Iron Man Anime and all of the episodes except episode 1 was downloaded. I looked at the error and it says "error = -50" and when I try to resume downloading, it continues to tell me that there is a download error and it wont resume.
It also says to check my network connection, but I'm connected. So....I'm not sure what to do...this kind of ticks me off. -
why won't my i phone back up? I plug in on itunes and then a message appears saying there was an error.what is wrong with it?
It might be helpful if you told us what the error message actually says.
Maybe you are looking for
-
Please let me now how to do. Because my Studio is based in Berlin, and I don't want to pay an suscribe with a wrong adress...
-
Error while install EBS 11.5.10 on RHEL5 oracle unbreakable linux
hello i got this error while install EBS and here is the log file 0/appsutil/out/VIS_oracle/templbac/adrundb1.sh setting permissions: 755 setting ownership: applmgr:oinstall Step 0 of 5 Command: /u01/oracle/visdb/9.2.0/temp/VIS_oracle/adrun9i.sh Step
-
Custom Template on Sales Order Form -- Actions Preview and Print
Hello All, I want to get the custom Template enabled for Layout Template associated to Transaction Types. 1) Go to Responsibility: Order Management Super User 2) Setup > Transaction Type > Define 3) Query Transaction Type > In the field "Layout Templ
-
Business Document Object image (OAER) in Smartform
Hi folks, This topic has been raised before, but no definitive answer has been provided. We have a Company Logo that has been loaded into the Business Documents repository via txn OAER for ALV Report headers. We wish to use the same image in our cu
-
I am on a macbook pro, OSX 10.6.7, and whenever I try to run a name.command file, it says I don't have appropriate access privileges. I am the only admin. Also, it's a name.command if that helps.