HT5228 How do I know if my mac is infected?

I am new to mac and just saw media reports about 600K infected macs.  How do I know if mine is infected?

Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
launchctl getenv DYLD_INSERT_LIBRARIES
Post the lines of output,if any, that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line (triple-click anywhere in it to select the whole line):
find /Applications /System/Library/CoreServices -type d -name *.app -exec defaults read {}/Contents/Info LSEnvironment \; 2> /dev/null | grep DYLD_INSERT_LIBRARIES
If you get no output from either step, you're not infected with any variant of Flashback that I know of.

Similar Messages

  • How do you know what version Mac OSX is on ANOTHER drive?

    How do you know what version Mac OSX is on ANOTHER drive without starting that drive
    and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

    Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
    I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
    I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

  • How do I know if my mac is 32 or 64 bit?

    how do I know if my mac is 32 or 64 bit?

    Top left corner, click apple,
    open about this mac
    click on more info...
    --- lot of data about your machine here ---
    click on system report (or go to utilities/ system report -- its just more fun this way) 
    Compare your Processor Name to information below
    determine whether your Mac has a 32-bit or 64-bit processor.
    all later model macs are 64 bit (unlike ms)
    Processor Name
    32- or 64-bit
    Intel Core Solo
    32 bit
    Intel Core Duo
    32 bit
    Intel Core 2 Duo
    64 bit
    Intel Quad-Core Xeon
    64 bit
    Dual-Core Intel Xeon
    64 bit
    Quad-Core Intel Xeon
    64 bit 
    Core i3
    64 bit
    Core i5
    64 bit
    Core i7
    64 bit

  • I Cloud. How does it know my various Macs?

    I Cloud lets one purchase an Op and it will appear on all my MAC devices. How does it know all my MAC devises?

    You would have to be signed in with the same Apple ID in iCloud settings in System Preferences on each Mac.

  • How do you know when your MacBook is infected?

    Hey All. Well my question is how do you know when your MacBook is infected with a virus? I came off windows and i have norton antivirus so i have something to tell me there. But on the Mac OS you rarely get viruses and i dont have a anitvirus program, so how do you know when you have one? And what does it do?
    Thanks!

    Since no ones got one that I know of it is hard to say. I figure that when the day comes that someone writes a Mac virus you will know real quick what happens. If your concerned you could use ClamXav. I use it if I download something for my wife's PC but have never found anything yet.

  • How do i know if my pc is infected by a backdoor virus?

    how do i know if my pc is infected by a backdoor virus?.... there was a window, which said that i won something.... the only button was the "ok" button, to go on.....there was no red X on the upper side left and i could not even close safari..... so i said "ok" and then I couldnt use safari anymore, until i started the computer again(doing it usually didn´t workd, so i had to shut it down just holding the start button)....now i´m scared i could have a backdoor on my pc now..... what can I do?... or how do I know if my pc is infected or not?
    please help!!

    You can't get a virus merely by loading a web page. As long as you didn't enter any personal information or open any files downloaded from that site, you're safe.
    Quit Safari (by force if necessary.) Relaunch it by holding down the shift key and clicking its icon in the Dock. That will stop the page from reloading automatically. Select Safari ▹ Preferences ▹ Privacy ▹ Remove all website data to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

  • How do I know if my ipad is infected?

    How do I know if my ipad is infected?

    No need to be worried. There are no viruses that can affect the iPad.
    99.9% of viruses only affect Windows computers. As your iPad does not use Windows it will not be affected.

  • How do I know if my Mac Book Pro and iMac support Windows 7 64 bit

    How do I know if my Macbook Pro and iMac will support Windos 7 64 bit? Macbook Pro is 2.26 GHz Intel Duo Core and iMax is 3.06 GHz Intel Duo Core? I need a software application that runs only on Windows

    as i know, all the macs with intel CPU will run 64bit version of windows. so dont worry! but choosing 32 bit or 64 bit version of windows usually depends on how much ram you have unless you have to use some application that requires 64bit windows. if you have more than 3GB of ram go for 64bit.

  • How do you know if your Mac is 2.4 GHz or 5 GHz 802.11n?

    We have a 2007 iMac and an original MacBook Air, which were both bought in January of 2008. And a brand new 17-inch MacBook Pro. Our Time Capsule is the older non-dual band model which was bought with the iMac and MacBook Air, again in January of 2008.
    If they are all 5GHz, I would think I would want to set the Time Capsule's Radio Mode for "802.11n only (5GHz)."
    Assuming that they are all 5GHz, is this what I should do for maximum efficiency, or does it really matter?
    (And yes, I know that our iPhones would not be able to use the 5GHz band. Not a problem)

    That's true. Apparently the 5Ghz band can use 40 mhz bandwith, rather than 20 mhz, which when combined with the relatively few 5ghz devices, means it can be quite a bit faster. I routinely get about 8-10 MB/sec (that's 64-80 megabits/sec) with my 2007 Macbook Pro and my Airport Extreme base station (802:11n). The signal from the Airport Extreme is pretty strong across even from about 150 feet away, and through several walls, but the speed drops significantly (to around 2 MB/sec at best)
    Unfortunately, I'm not sure how to confirm your Macs support 5 ghz, apart from simply trying to connect to a 5 Ghz only network. I would assume that since my late 2007 MacBook Pro supports it, your Macbook (and probably Macbook Air) will support it too. I can't say for the iMac.
    You can look in the Airport section of System Profiler, then look for an entry like this:
    Supported PHY Modes: 802.11 a/b/g/n
    Note the 802:11 a - apparently the "a" refers to the 5 Ghz band, which is used by 802:11n. So, if it shows this, I figure it should work fine.

  • How do i know if my mac book is working on N speed

    I just bought the new airport extreme and there is a software that allow to change the configuration of the mac books from G speed to N. I check that i have that software installed, but i don't know how to make it work. I don't know if it is working but i surely don't feel any difference on the speed of my network.
    If somebody can help me telling me how to check is my mac book is working on N will be really appreciated.
    Also, can somebody tell me how many kb/sec is N speed and G speed. And how to se at what speed I<m tranfering data between my macbook and my external drive.
    thanks

    Log out and log back in, if you haven’t done so recently. Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    launchctl getenv DYLD_INSERT_LIBRARIES
    Post the lines of output, if any, that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line (triple-click anywhere in it to select the whole line):
    find /Applications /System/Library/CoreServices -type d -name *.app -exec defaults read {}/Contents/Info LSEnvironment \; 2> /dev/null | grep DYLD_INSERT_LIBRARIES
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    If you get no output from either step, you're not infected with any variant of Flashback that I know of.

  • How do I know whether my MAC or Airport Express is running at 'n' speed

    G'Day
    I have my current model MacBook Pro and new Airport Express up and running - no problems love it. It seams like a faster conntection but its always pretty subjective unless you run a test (which I am too lazy to do).
    Does any one know how we you can tell whether the conntection is happening at b/g/ or n speeds. My windows machine tells me that is connection at using 802.11 G but I can't seem to find anywhere in the Airport utility or in MAC OS to show what mode it is connected in
    Thanks in advance

    I'm not to sure I would rely on the data in the logs and stats on the extreme, I have some devices apparently working at -1 mbit/s (yes minus one).
    Don't forget, as well as the n enabler which is installed when you install the airport utility, there is an update available which you should install on all your macs connected to the extreme
    http://www.apple.com/support/downloads/airportextremeupdate2007001.html

  • HT5228 How to find out if your Mac has the Flashback Trojan EASY WAY!!!!

    http://www.cnn.com/2012/04/06/tech/web/mac-flashback-trojan-check/index.html
    Just did it works great and they also have a post on how to remove it as well.

    Here is an even easier way, it will remove most infections too:
    I have created a user tip and malware checker/removal tool: https://discussions.apple.com/docs/DOC-3271

  • How do I know if my mac is compatable for airport express?

    Stupid question I know but I have a minimac osx 10.3.9 when checking
    under system profile this is the info I get: hardware: airport card: no information found.
    I take it this means I cannot use airport express

    Not sure about your question... The AirPort Express (AX) is a 802.11b/g wireless router.
    ...I have a minimac osx 10.3.9 when checking
    under system profile this is the info I get: hardware: airport card: no information found.
    I take it this means I cannot use airport express
    That indicates that your Mac mini does not have a wireless card installed. Therefore you would not be able to make a wireless link to an AirPort Express (AX).
    However... you could connect your Mac mini via Ethernet to a LAN port on a wireless router. Then configure an AX to join the wireless network as a wireless client. The Mac mini would then be able to stream music through the wireless router to the AX.

  • How do I know if my Mac has been infected with the virus

    I recently was asked to download an Adobe Acrobat reader update but before I was made aware that the current virus was contained in a similar request, I downloaded what I assumed to be a legit update.  I currently do not use my mail program on my Mac so am unaware of any spam being distributed from the computer.  How can I identify if my computer has been infected with this Trojan Horse virus?

    Two Helpful Links Regarding Flashback Trojan
    A link to a great User Tip about the trojan: Flashback Trojan User Tip
    A related link in the tip to a checker: Malware Checker Dowload Link
    A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started.
    For now I recommend the User Tip from etressoft to detect and remove:
    Checking for and removing the "Flashback" trojan

  • How do you know if a Mac was stolen?

    I know this isn't the right place for this question but none of the other sections were suitable either.
    I'm considering buying a used MacBook Pro from Craigslist. Because some of the prices are so cheap though, I became suspicious. I figure... If someone is going to sell their MacBook Pro for a couple hundred, there must be a reason, right? My guess is that some of them must be stolen because by having a cheap price, they're bound to get rid of it quickly.
    Anyways, I just want to know if there's anyway of testing/checking to see if a Mac was stolen or not before purchasing it. Also, if there's a way of doing a quick diagnostics on it to make sure it's in good running condition.
    Thanks.

    I purchased a MBP around Christmas and while on my search I came across a few (3+) MBPs that were offered for sale at incredible deals. The general description was they were purchased as gifts to the seller and he didn't need them because he already had a computer. Somebody else went to check out one of these computers was able to discover that the seller purchased these computers with a solen credit card.
    My guess is that once the CC company reports the theft to Apple, the serial number associated with the machine will show up on their data base and if you needed to repair your unit, it would/could bring up the stolen flag.

Maybe you are looking for

  • Trying to get started.. but fumbling badly.

    I just got my first MacBook Pro on monday (currently posting from it). I decided this morning that I wanted to register a .mac name and try it out for its free trial period. I went to system settings, clicked on the .mac icon, and typed in my newly c

  • Reminder days in purchase orders

    Dear, If we have a material with the following reminder days: 5 - 10 - 20 Then, the first reminder is send 5 days after the statistical delivery date (of course, if we run ME91F) The second reminder 10 days after the SDD. The third reminder 20 days a

  • How to create dynamic windows in smartforms

    Hi All, i am creating a smartform wherein i have to print different layout for different company codes, like if the company code belongs to an Indian company then i need to display cost center window. so can you please guide me through the procedure

  • TS1646 i have a problem with my itunes accounts. When i want to buy in-app features i got an error that;

    "i have a problem with my itunes accounts. When i want to buy in-app features i got an error that; "Please contact with iTunes support for completing this process" i checked my device settings and i tried my account with another ios device but result

  • Specify a tax jurisdiction key Message no. F5566

    Hi, We are doing roll out for US Conpany. in the same while creating / changing PO i am getting following error "Specify a tax jurisdiction key Message no. F5566" From FI side regarding tax jurisdiction config is completd and in WBS also tax jurisdic