HT5243 Issue with Java operation on printer operation using Shipping software.

We are running a shipping system from APC couriers using the online booking system, there system runs using Java for the printing but it will not print normally due to a Java issue so has to be printed from another screen, our system has the latest version of Java any suggestions

4 x 146.8Gb local disks RAID 5 mirrored using the hardware raid controller HP Smart Array 5i+.
2 Emulex LP10000 HBA cards dual path connected to EMC Symmetrix and IBM DS4800 SAN Storage. There's your problem right there.
In almost every situation I've encountered as a DBA, RAID5 is slow. Slower than single disk. If you have 4 drives, you're better off doing a RAID10 so that your hardware doesn't have to compute the parity bit. You'll lose 145GB, but you're MUCH better off in terms of performance. RAID5 was meant for file servers and low-load webservers, not high-end databases.
The only time I've ever seen RAID5 perform acceptably was when we had redo, rollback and the default tablespaces on a different set of disks, and the main data tablespaces on a RAID5. There were very few updates/inserts to the main tablespaces and mostly reads. That's the only time you can use RAID5. But I'd still suggest doing RAID10 and just putting everything on it.
In general, I also have NOT seen good performance with a SAN. The only time you should use a SAN is when you can't get the capacity you need onto a SCSI channel (or, again, you don't need it to be fast). Otherwise go internal disks on a RAID10 and forget about the SAN. SANs have the disadvantage of having to be shared with a large number of hosts to be cost-effective and shared IO isn't something you want on a high-end database.
For more information, check this out:
http://asktom.oracle.com/pls/ask/f?p=4950:8:3322095211375936281::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:359617936136

Similar Messages

  • I am  having  issues  with java

    OK well I finally got  the java update to full load and it stated that it was corrupt or something like that and now I can not get into my favorite chat room it says I need to get java ..   when I go to the link to  re get a update to java it says I am updated.. so I called apple and they sent me a patch or something and it did not help .. anyone have any ideas what is happening?
    my old chatroom I think I remember someone talking about java issues there and how you had to have a old java  or something like that ..  can somehelp please!

    golam wrote:
    I am having issues with java encoding in Gentoo Linux environment. I am using java 1.6. When I ran the following test application to print french accent with encoding type, all I get is wrong character. Please provide me with some pointers. When I try this in Windows, it works perfectly. Many Thanks in advance
    //test.txt file contains the following string
    àäèéêëîïôùûüÿ
    ///TEST CODE to find which encoding to use
                              System.out.println("encoding:"+encoding[i]+"line===>"+inputLine);
    This is the problem.
    Don't assume the console character set can display these characters,
    use a swing component.
    This is also why it happens to work in on some boxes and not on others.
    ///////////////OUTPUT after running the test app
    java Test encoding:Big5line===>???????
    encoding:Big5-HKSCSline===>???????
    encoding:EUC-JPline===>???????
    encoding:EUC-KRline===>???????
    encoding:GB18030line===>???????
    encoding:GB2312line===>???????
    encoding:GBKline===>???????

  • Issue with java

    hi, since i updated to version 10 of ff i have been getting an issue with a chat site that uses java, not sure if its an issue just with this site, or if its java related since updating to 10, maybe its just good timing with the update.
    anyway the issue i am having is i can use the actual chat site fine, when i go to any of my other tabs though, i.e facebook.. i then cannot click into sections where i can click my mouse and type, say in a chat window on facebook or the url bar, they all freeze, the page is useable apart from not being able to type in any box.
    what i found was if i try to click in a text box on facebook, nothing shows yet if i tab back to the chat site thats using java, what i tried to type on facebook is in the chat box on the java site.
    not sure if i have explained that well enough, i hope i have.
    does anyone know if this is an issue with ff or the chat site using java?
    the site is: http://www.ukchatterbox.co.uk/

    I also have this issue on 5.3. It is very difficult to do even a basic level of profiler analysis. The tool is ok at finding big watermelons (CPU cost or memory allocations), but when you want to drill in and see any more detail, it becomes quite painful. Best case is that I would be able to "swim" through the profile data, moving easily from method-to-method, and see the recorded sample counts in a base (samples in this method itself) and cumulative (samples in this method and all called methods) fashion. The indentation in the tree view can be painful. I would suggest a more simplified view as an option,
    PARENT (callers) methods, full names and cumulative sample counts (percentages would be nice as well)
    SELF (called) method, full name and cumulative sample counts (percentages would be nice as well)
    CHILD (calles) methods, full names and cumulative sample counts (percentages would be nice as well)
    Clicking on any row in the above immediately makes that method become the SELF in the view.
    Also, I should be able to enter the class/method name into some text box above this view and easily get into the data for the method. With the current tool, there is no way to quickly go to the data for a specific known method.

  • Does Safari have issues with Java?

    When I log into my IG Index financial spread betting account safari usually quits unexpectedly immediately after the dealing screen has loaded. This is causing me huge frustration. The site relys a lot on Java. I believe there were issue with Java in Mac OS 10.3.9 that may still exist on 10.4.X
    Any ideas?

    Do you have the latest versions of Java installed?
    Have you enabled Java in Safari's preferences?

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

    My debit card kept getting rejected by my iTunes account, it there an issue with iTunes? I have been using the same Card since very long time. I downloaded the iOS 8, can I talk to someone so I can get this resolve?

    Apple is not here. Contact Apple to resolve your issue:
    iTunes Support WorldWide
    or
    iTunes Support by eMail ww
    Cheers,
    GB

  • Issue with JAVA Mail API

    Hi
    We have a requirement to create a custom e mail. For the same I am trying to use Java Mail API.I am facing an issue with the following code:
    session session1 = session.getInstance(properties, null);
    System gives an error Sourced file: inline evaluation of: ``Properties props = new Properties(); session session1 = session.getInstance(prop . . . '' : Typed variable declaration : Class: session not found in namespace
    Is there some specific API i need to import for session class. Kindly suggest.
    Regards
    Shobha

    Hi Shobha,
    I was also facing the same issue from last couple of weeks and just now i have achieved the working functionality.
    Please find below working code and replace values as per your serveru2019s configuration.
    import com.sap.odp.api.util.*;
    import java.util.*;
    import javax.mail.*;
    import javax.mail.internet.*;
    import javax.activation.*;
    import java.io.File;
    import java.net.*;
    // SUBSTITUTE YOUR EMAIL ADDRESSES HERE!!!
    String to =<email address>;
    String from =<email address>;
    // SUBSTITUTE YOUR ISP'S MAIL SERVER HERE!!!
    String host = <smtp host name>;
    String user = <smtp user name>;
    // Create properties, get Session
    // Properties props = new Properties();
    Properties props = System.getProperties();
    props.put("mail.transport.protocol", "smtp");
    props.put("mail.smtp.host", host);
    props.put("mail.debug", "false");
    props.put("mail.smtp.auth", "false");
    props.put("mail.user",user);
    props.put("mail.from",from);
    Session d_session = Session.getInstance(props,null);//Authenticator object need to be set
    Message msg = new MimeMessage(d_session);
    msg.setFrom(new InternetAddress(from));
    InternetAddress[] address = {new InternetAddress(to)};
    msg.setRecipients(Message.RecipientType.TO, address);
    msg.setSubject("Test E-Mail through Java");
    msg.setSentDate(new Date());
    msg.setText("This is a test of sending a " +
    "plain text e-mail through Java.\n" +
    "Here is line 2.");
    Transport.send(msg);
    Deepak!!!

  • Issue with Java applet

    I am having issues with an "inactive plug-in" message in Safari when I want to do something using a Java plug-in.  I searched the communities and sure enough, when I opened Java preferences the box next to "enable applet plug-in and Web Start applications" the box was unchecked so I checked it.   Unfortunately, when I go back into preferences, the box is once again unchecked.  I did find out that I had a Trojan in the user.jar file associated with java but despite taking care of that issue (which for all I know is not related), this issue persists.  All of my software is up to date and from what I gather uninstalling and reinstalling Java is not an option and should not need to be fone.  I'd very much appreciate any input!

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Paper Type issue with Adobe Standard X printing from browser

    I work in IT and have two users who suddenly started having a problem printing PDFs from a browser (IE9).  We cannot upgrade the borwser to 10 or 11 because it becomes incompatible with a few of our in house websites.  I uninstalled standard and installed Adobe Reader XI and did not experience the same problem, but they are in need of Standard X in order to do their job.
    What happens is when the PDF opens in the browser and they go to printer, the default for paper type is High Gloss paper instead of plain or unspecified.  This doesn't happen if we open a pdf from the desktop and print and the default for the driver is plain.  Yes, we could save the document and then print it, but they feel that takes more time and I have to find out why this is happening. Any help would be very appreciated.
    Windows 7 32 Bit PC
    Internet Explorer 9

    Probable issue with the Firefox is that in the documentation it is poorly worded poorly,  JIDS only support FF 17.
    What is the issue with IE if that does fix the FF issue?

  • Smart form printing issue with LOCL and SAP printer

    Hi,
    The issues are as follows:
    1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
    2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
    In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
    Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
    What can be done to the reports to allow them to print on our HPLJ4?
    Thanks, Prathap

    Hi Prathap,
    Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
       Color: White
       Saturation: 100%
    this can be the problem.
    I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
    The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
    Please change the shading for window MAIN -> tab 'Output Options' to:
       Color: Black
       Saturation: 0%
    and this should resolve the problem.
    Then create a new spool and check if the problem is resolved. See SAP Note #400050.
    Regards,
    Aidan

  • Cert issue with Java 1.7 vs Java 1.6?

    As part of our Java Update process, I’ve been updating the Java version that our ColdFusion servers (9.0.1 Cumulative Hotfix 4) use from Java 1.6_xx to 1.7_17. Overall, no issues, except… when trying to connect to a couple of internal servers via cfhttp (https).
    I have imported the existing certs, (that we have been using successfully with Java 1.6_xx) into the 1.7_17 keystore, and yet I get an  “I/O Exception: peer not authenticated” error. This in most cases, implies that the certificate is not valid. However, if I point ColdFusion back to Java 1.6_xx , it the cfhttp call works fine.
    My theory is that, for some reason, the certs are not “quite right” and whereas Java 1.6 accepted them, Java 1.7 is more strict in regards to certs.
    Has anyone else experienced this, or have some advice?
    Thanks in advance...

    We had the same issue, albeit with CF10 with Java 1.7. The local_policy and US_export_policy JAR files need replacing. You can get them from Oracle (http://www.oracle.com/technetwork/java/javase/downloads/jce-7-download-432124.html). Our JARs are installed at C:\ColdFusion10\jre\lib\security - yours will be different, but the \lib\security folder is where they'll reside.  We stopped ColdFusion, backed up the security folder, and then overwrote the files in that folder with the ones from Oracle, and restarted. CFHTTP with https:// then started to work. Is your certificate a 2048 bit variety btw?
    If you can't get it to work try the CFX_HTTP custom tag as a workaround. This worked for us too until we changed the JARs. I'd actually stick with CFX_HTTP if I had the issue again - great custom tag with lots of features and works straight away.

  • Compliation issue with Java 1.5

    Following Compilation warning is seen only with Java 1.5 for the code using JNI -
    /sw/CRFS/solaris2.8-sunpro5.3/THIRDPARTY_SUNSTUDIO9/0_0_3/bin/SUNWspro/prod/bin/stdlibfilt -stderr </tmp/c++filt.27205.1.err
    ld: warning: file /share/prime/JDK/jdk1.5.0_06/jre/lib/sparc/libjvm.so: section .SUNW_dof has invalid type 0x6ffffff4
    rm /tmp/c++filt.27205.1.err
    sgs36a-0032 [share/prime/JDK/jdk1.5.0_06/jre/lib/sparc]#dump -Cv libjvm.so | egrep SUNW_dof
    [8037] 0x535f50 54756 OBJT LOCL 2 15 __SUNW_dof
    Whereas no such warning with Java 1.4.2. Can anyone help me in getting rid of this or any thoughts.

    I've just run into this same issue. Did you find a solution?

  • Issue with create user and issue with Java Development tab

    I have two issues with EP,
    1. When i login with Super Admin user, i am unable to Create any user from User Admin tab. Do i have to change the settings of the Super Admin? or is there any criteria for creating the user?
    2. How to assign any user the Java Development tab. Though i login with a super admin user i am unable to see the Java Development role and when tried to assign the role, there were no searches for that Java....

    Hi Adi,
    by default the super administrater has got all permissions. Thus you should be able to create portal users when using a user assigned to the portal group Administrators.
    In order to help you with your first question we need more information. Please describe the malfunction in detail. Have a look into the log files and post related error messages.
    Regarding your second question: You will find the java development role in PCD
    pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper.
    If not, then you haven't installed the PDK business package in your portal.
    Go to service.sap.com, choose downloads and search the package (PDK should do it). Download the package, and deploy on your portal using SDM.
    Best regards,
    Martin

  • I was wondering if you have fixed the compatibility issues with java and flash players in the new patch

    after update 6.0.0 all java scripts and flash players where incompatible and disabled i tried re-down loading new versions and tried to erase Firefox and all ad-dons and reload them and still had issues with them i had to re-download Firefox 5 to continue to use your program and i wanna make sure that in 6.0.2 i will not have to do the same thing.. it is a head ache and inconvenient

    You're welcome.
    The only workarounds to this problem is going back to Safari 4,
    You can revert to 4.0.5, instructions here.
    http://appletoolbox.com/2010/06/downgrade-from-safari-5-0-to-safari-4-0-5/

  • Since recent upgrade, I can't see any of my projects in Shutterfly. Their customer support says it may be issue with Java app and Adobe Flash Player

    see above-- are there known issues with these apps?

    Your Java player (if relevant) is not clearly indicated in your plugins list, and your Flash player is several versions behind. If Apple has an update site, you might check that first. Mozilla's site is here: http://www.mozilla.org/plugincheck/

Maybe you are looking for