HT5244 Are there any signs i should look for that would indicate my system is infected with the new java virus?

Just to keep an eye out.

WZZZ wrote:
I ran it just to see, even though I know I'm clean. I agree with T. Reed's comment that it may not be for the novice user who doesn't know what belongs where.
Which is why they should just press "enter" when in doubt.
I know this isn't your full time job, but perhaps you might want to write another alternate script
Apple says it is going to write one.
Another thing. When it was busy scanning Applications -- I know it says "this may take some time," I gave up and hit skip after giving it a very long time to finish.
Thanks. Don't mean to be ungratefu for your good work on this.
There is no way to tell how long that will take. If I had to edit that script, I would just remove that part. I was following advice that was not accurate in the ensuing blog frenzy. That was costly. I didn't have much time, so should I have gone ahead and scan system areas or done a better job with LaunchAgents? I made the wrong choice.
I always welcome suggestions. Unfortunately, comments on User Tips seem to be locked down pretty tight.
It is a moot point now that Apple is going to write a script. When that happens, I will take down that script. Until then, I'm just reminding people to press "enter" when in doubt.

Similar Messages

  • HT5056 what if you have Mac OS 10.5.8? Will there be a software security update for that version or will I have to by the new version?

    is there  a software update for Mac OS 10.5  or will I need to download a newer version of the OS to insure that my Mac is safe?

    ...is there  a software update for Mac OS 10.5
    Yes. Apple just released the following
    Flashback Removal Security Update
    ...and a Flash-related update
    Leopard Security Update 2012-003

  • 2015-3-23 iPhone 6 got a new product Why is enabled, data on new products 2014-11-28 Are there any signs? Please answer

    2015-3-23 iPhone 6 got a new product Why is enabled, data on new products 2014-11-28 Are there any signs? Please answer

    This might be a hardware failure, to find out, try to set the phone back to factory settings, as explained in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If the error comes back, contact Apple Support to get the phone serviced or visit the Apple Store or Authorized Apple Service Provider next to your place to get that done.
    iPhone - Contact Support - Apple Support

  • Are there any other templates available besides those that come with numbers?

    Are there any other templates available besides those that come with Numbers?

    Hi David,
    If you have Numbers '09 there is a Checking Register template that might suit.
    Numbers can open Excel templates and documents. Do a web search for checking register spreadsheet.
    Regards,
    Ian.

  • Are there any specific codecs or import libraries that will make Premiere 6 use more file types?

    Are there any specific codecs or import libraries that will allow Premiere 6 to import more file types?  I'm using Premiere 6 on Windows 7.
    It seems that the only kind of file that can be imported in to this version of Premiere are certain types of AVI files... even some types of AVIs will import but then will not appear when placed in the timeline... no MPGs, MP4s, WMVs, or anything else will import at all.
    Virtually every file that I need to bring in to Premiere 6 has to be converted to AVI with the H.264 codec first.
    Any help would be helpful.
    digi

    Hi Bill and John,
    Thanks for your replies.
    My inquiry isn't as much to do with the AVIs that won't import as it is to do with figuring out the way that I can make MPGs, MP4s, MOVs and WMVs import in to Premiere 6.
    The AVIs that do import were converted or created using the H.264 codec.  I do know a little about codecs, but I don't hold the PhD in codecs that is apparently required to completely understand them.
    Below is the chart from the Premiere Elements 4 page at this link... http://kb2.adobe.com/cps/402/kb402540.html
    So, if I understand correctly, Bill is saying the Premeire Elements 4 is actually newer than Premiere 6 and that the Pr Elements apps will actually import more movie file formats than the regular versions of Premiere and Premiere Pro?... for someone trying to learn about these apps, one must admit that this seems to be reverse logic... this would be saying that Adobe gave the cheaper "consumer" versions of Premiere the ability to work with 3 or 4 more movie file formats than the more expensive "pro-sumer" version of Premiere.
    Premiere 4 Elements File Format Support Chart
    Microsoft AVI (.avi)
    Import and Export
    MOD (JVC Everio camera) (.mod)
    Import only
    MPEG-1 (.mpg, .mpeg, .m1v, .mpv)
    Import and Export
    MPEG-2 (.mpg, .mpeg, .mpe, .m2t, .m2v, .mod, .mpd, .m2p)
    Import only
    MPEG-4 (.mp4, .m4v)
    Export only
    Export via QuickTime file or "Share to Mobile" workflow.
    QuickTime Movie (.mov, .moov)
    Import and Export
    Windows Media video (.wmv)
    Import and Export
    The built-in web browser instruction manual in Premiere 6 shows this statement on the "Importing Clips" page, as shown in my screenshot linked above...
    "File format support is provided by plug-in software  modules. Over time, additional or updated file formats may be available  from Adobe or other manufacturers, such as QuickTime."
    This indicates that additional file format support can be added to Premiere 6 by "plug-in software modules", and that "over time, additional or updated file formats" were predicted to become available that would be supported by the file format manufacturers, such as Adobe themselves and other manufacturers such as QuickTime.
    Since that was written ten years ago or more, there has certainly been the chance for these additional "plug-in software modules" to be developed "over time"... so I'm asking, "Where are they available?"
    What I'm saying is, I will do my homework to earn at least my Bachelor's degree in codecs, but more than an education in codecs, I need to find these mysterious, "plug-in software modules" for Premiere 6 that Adobe wrote about and referred to over ten years ago.
    Thanks for any clues as to where to locate these "plug-in software modules".
    digi

  • Are there any presets in iPhoto '11 for print quality?

    Are there any presets in iPhoto '11 for print quality?

    No.  Just use the greatest number of pixels for your photo available.  Other quality settings would be in the printer window, i.e. color settings, etc.
    OT

  • Are there any standard Idocs or Bapis for posting the data into transaction

    Hi,
    Are there any standard Idocs or Bapis for posting the data into transactions ME42N and IK11?
    Thank You.

    Thank you.
    Any idea of the other one?

  • Are there any available upgrades or updates for osx 10.6.8

    are there any available upgrades or updates for OS X 10.6.8       Version 5.1.10 (6534.59.10)

    Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (122953)

  • Are there any specific files (other than swf) that are not supported in the content viewer?

    Are there any specific files (other than swf) that are not supported in the content viewer?

    Specifically -- Is there a limitation as to any content in a PDF that would keep it from displaying correctly other than swf?

  • Are there any good DVD authoring programs for Mac now that Apple has discontinued DVD Studio and iDVD? I need to make DVDs that have interactive menus and such (Final Cut X and Compressor 4's DVD option is a little cheap). Any ideas?

    Are there any good DVD authoring programs for Mac now that Apple has discontinued DVD Studio and iDVD? I need to make DVDs that have interactive menus and such (Final Cut X and Compressor 4's DVD option is a little cheap and doesn't provide any kind of professional DVD authoring). Any ideas?

    This comes up a lot these days.
    Practically speaking, there are really four options for the Mac platform: Toast (<$100),  Adobe Premier Productiom ($1,600 to buy or $50/month to rent),  find a copy of Final Cut Studio from 3rd  party (+/- $1,000 new) or a boxed edition of iLife to get iDVD ($50 - $90 on Amazon new).
    The other question everyone has is how many OS versions before iDVD or FCS breaks? No one knows, but Apple has said they're no longer supporting these legacy apps. Of course, no one is mandated to upgrade to a new OS unless they buy a new computer. So if it works on a system, stay with it as long as it makes sense.
    Good luck.
    Russ

  • Are there any classes Apple store offers for new mac owners

    Are there any classes Apple store offers for new mac owners, Are there any classes Apple store offers for new mac owners

    Yes.
    One to One is just $99 for a full year and is available only at the time you buy a Mac from the Apple Retail Store or the Apple Online Store
    http://www.apple.com/retail/learn/one-to-one/
    http://www.apple.com/retail/learn/one-to-one/terms.html
    http://store.apple.com/us/browse/campaigns/onetoone

  • I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  No firewall involved.

    I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  There is no firewall inbetween the two connections, as this is all on our internal network. 
    Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
    Thanks.

    If anyone ever comes across this and has the same issue, here's what I did to fix it:
    My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only".  (I would've used N but one of the NICs in my house is too old to support it.)  Anyway, after making this change, Facetime works fine on the phone.  Hope this helps someone else!

  • Are there any apps like outlook but for the ipads?

    are there any apps like outlook but for the ipads?
    I want to manage my calendars appointments outlook is perfect but is it compatable for ipad

    Yes Outlook is Compatible for iPAD, but you have to buy it as an additional APP. However you can download something called "iCloud Control Panel" for Windows Machine & Install it. This would integrate all your Windows Calendar in Outlook to iCloud.
    Then enable iCloud in your iPad. All your contacts & calendars would sync automatically to your outlook on the windows machine. You can actuallu configure "Mail" app in the iPad to your exchange server.

  • Is there any way to re-install an older version of pages on my computer? The new version lost a lot of the templates I enjoyed using...

    Is there any way to re-install an older version of pages on my computer? The new version lost a lot of the templates I enjoyed using...

    If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09 unless you deliberately deleted them.
    If you did delete them & have a Time Machine backup that includes your Applications folder you can restore them from there. In the past the iWork apps have not worked well when copied from another drive, but some users have reported that this works for them, especially if the apps were originally purchased from the Mac App Store. If you originally installed them from the retail disk, find the disk & reinstall them & then update to iWork 9.3.

  • Is there any way to interface an IEEE 1394 camera to LabVIEW 8.0 without buying the new vision software package?

    Is there any way to interface an IEEE 1394 camera to LabVIEW 8.0 without buying the new vision software package?  We upgraded to LabVIEW 8.0 to use a new NI Digital I/O device, but we do not have the budget to upgrade the camera driver for 8.0?  Is there any other way to interface an IEEE 1394 camera to LabVIEW?
    Thanks,
    Bpb

    I think this is possible if there is an SDK delivered with your camera or
    you use the Windows 1394 video driver for handling this.
    Kind regards,
    http://www.vhdl.eu
    "WU undergrad" <[email protected]> wrote in message
    news:[email protected]..
    > Is there any way to interface an IEEE 1394 camera to LabVIEW 8.0 without
    > buying the new vision software package?&nbsp; We upgraded to LabVIEW 8.0
    > to use a new NI Digital I/O device, but we do not have the budget to
    > upgrade the camera driver for 8.0?&nbsp; Is there any other way to
    > interface an IEEE 1394 camera to LabVIEW?
    > &nbsp;
    > Thanks,
    > Bpb

Maybe you are looking for

  • Phone settings not retained once they are set

    Hi everyone, Has anyone had the unfortunate experience of your settings such as sound, weather, mail, etc. not being retained after making changes to them? My wife just bought this iPhone for me a few days ago and it is updated with the latest versio

  • How can I let a computer that isn't authorize to play any purchase because there isn't any computer that can so far?

    Please help

  • Ncmpcpp doesn't show songs

    i'm lost, can't figure out what's wrong i've mpd set up as an user ~/.mpd/mpd.conf music_directory "~/music" playlist_directory "~/.mpd/playlists" db_file "~/.mpd/mpd.db" log_file "~/.mpd/mpd.log" pid_file "~/.mpd/mpd.pid" state_file "~/.mpd/mpdstate

  • Nokia C7 contact default phone number

    I have a Nokia C7-00 and are using Nokia Ovi Suite 3.0.0.290. As soon as I have edited a contact with several phone numbers, one of the numbers is marked as default number. After synchronizing, there is only the default number visible for voice call.

  • Can't Authorise Computer :(

    While I was trying to install an application from my iTunes to iPad, it said that I could not install it as "this" computer was not "authorized". I went to Store>Authorize this Computer, and then entered my ID and password. The authorisation process