HT5271 auto fill not working correctly

Auto fill is not working correctly. How can this be fixed?

Leopard 10.6.8 is Snow Leopard.
Do this please ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
What version does it say?
10.6 10.5 ??

Similar Messages

Auto Rotation not working correctly Radius p55w B5112

It has not worked correctly since I bought it. I have recovered from image fresh again, and then went through and hit windows update and updated 134 updates. Auto rotate does not work in tablet or in presentation mode. The keyboard never shuts off and I can type in tablet mode. If I have this on my lap, the buttons are pressed. I have a lock on my screen rotation, it is greyed out and I cannot access it. Any other suggestions to fix this?? Everthing else works great!

Model Name: P55W-B5112
Part Number: PSVP3U-003003 Support site here If it is brand new and not working correctly then I suggest bringing it back and requesting a replacement or refund. It should work perfectly brand new without having to fuss around.

Auto fill not working with sign-in accounts (in Safari)

Could anyone suggest me how to have the AUTO FILL form work in my Sign-in accounts (in Safari) ?
Could not find anything specifically on this forum, yet.
Thanks for your help.

HI, I seem to be experiencing a simple problem with my safari that has been going on for a while now, and it is starting to get on my nerves. As of late, safari wont auto fill usernames emails. This has never been a problem before, and I haven't altered any preference settings, please help.
Thank u in advance

Passwords and Auto Fill not working...

All of a sudden, new passwords are not being retained and auto fill doesn't work at all. I've repaired permissions, checked every setting I can think of. What should I try next?
Thanks,

I had a similar problem with autofill. Repairing permissions with Onyx seemed to work. (But first, double-check that Autofill is enabled and your "me" Address Book card is correct.)

Apple mail auto fill not working

Since upgrading to Mountain Lion auto fill is no longer working when addin email addresses to an email. I have checked preferences and it is turned on. Additionally when I start to type the spinner, for lack of a better term, starts to spin but it never fins an address to auto fill. Any idea why this may be happening?
Thanks,
Mike

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Quit Mail.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Relaunch Mail and test. If the problem is resolved, you'll have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.

Magnetic lasso and auto sharpen not working correctly

anyone having this problem with PSE 3.0

Which operating system are you using?
What is not working with the Magnetic Lasso Tool and Auto Sharpen?
Have you tried resetting the photoshop elements 3 preferences?
To reset the preferences:
Press and hold the Shift+Alt+Ctrl (windows) or Shift+Option+Command (mac) keys just after starting the launch of the pse 3 editor.
Keep holding the keys down until you get a dialog asking if you want to delete the photoshop elements settings file
Press Yes to reset the preferences.

Camera fill not working correctly crashes app

I've tried using the camera fill feature on both the iPhone 5 and 5S. In both cases the app crashes when trying to camera fill. It is working just fine on the iPad. Hopefully this will be corrected soon.

ibarrien wrote:
Hi,
What do you mean exactly by "except it does keep whatever was taken with the camera"?
Does this mean that you can use the image if you do "Select all" and then take the picture?
Thanks,
Ignacio
Actually, yes, that works. And, yes, it's just with PS Touch so far.
gruele wrote:
Hi. Do you have the same problem when you open up the Android Camera app and switch to video mode?
I can import pictures using the Android Camera app within PS Touch when I start or during a project if that's what you meant. If you meant the Camera app by itself, I can switch just fine between modes.
More things (might as well retitle the thread, "Odd issues with ICS and PS Touch"):
When I make a selection, the edges of the selection are pretty rough (almost artistic-looking, as if I had put a "torn-edge" look to it). The issue is not reproducable and disappears after I tap "Feather" under the selection options icon and set the feather to zero. After that, selections function as they should.
Fonts under the "Add Text" command like Trajan Pro have gone AWOL. This happened to me once with PS Touch under Honeycomb but that was resolved by uninstalling and reinstalling PS Touch. Below is a screenshot of the now-limited list of fonts (I keep forgetting ICS can do screen grabs now):

Auto-Rotate not working correctly after 8.1.1 update

Updated my iPhone 5s to 8.1.1 last night. Auto-Rotate will rotate to the side but will not rotate back now.
Surely this is not by design??

It may be an app that is doing it. If its fine after a reset and then does it at some point, keep track of what apps you are running. There was an app that would always lock my ipad2. I don't recall now which one. Somewhere along the line it must have got patched.
The only problem I'm having with the air is that the split keyboard comes up very crudely compared to ios7. A full gray rectangle is drawn and then the center disappears. It looks very ameturish.
I am having some Safari issues on my phone. Not sure if it's an iOS8 thing yet or not.

Auto fill not working on safari version 8.0.3

I recently discovered that the websites I have been using daily are no longer remembering my username or password. I recently deleted my history could this have anything to do with it? What is the handle for it?

From your Safari menu bar click Safari > Preferences then select the AutoFill tab.
Make sure; User names and passwords is selected.
Deleting history should not remove your user names and passwords but if you removed all website data from Safari > Preferences > Privacy, that will remove usernames.

My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now,it it does NOT work at all.

My google bar "auto fill" feature worked GREAT, until I upgraded to Firefox 4. Most of the time, now, it it does NOT work at all. ???
I have reinstalled my google bar AND firefox 4, with no improvement. ??????????

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

Share point in server admin not working correctly... I think

I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
afp://server.mydomain.com/Users
However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

Moblie site not working correctly

hello
i am using muse and BC, with my web site westfieldsautocentre.co.uk and very happy with it, until tried to do add mobile one.
it ends up looking all wrong when i view it on my iphone
please use this link to see - Westfields Auto Centre
but if i publish the very same site to a fresh BC site it is OK
Please use the link to see - http://wacmoblie.businesscatalyst.com/index.html
is it some thing wrong with BC or MUSE
please help
paul

Sorry Zak
I do not understand, i have check my domain settings and re-link it as per info, but still not working correctly,
If i type in on my iPhone just westfieldsautocentre.co.uk . it is redirect the home page from my desktop to the mobile homepage but not sizing the page correctly as per mobile site should do,
but upload the same site to a fresh BC site all is ok,
From that i can see its something to do with my domain name link to my site.
But do not understand what "redelegate your domain name to point to your site on Business Catalyst" means.
Is there anyway you can put this in more simple terms that a car mechanic can understand or should i keep to repairing cars
kind regards
Paul

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

HT5271 auto fill not working correctly

Similar Messages

Maybe you are looking for