HT5278 My iPad will not load the update.  Please help

I am pretty sure I need to clear some memory in my iCloud account, but I do not know how, and am not sure that is the problem... Any help is greatly appreciated...
Thank you.

Did you delete the iCloud backup? Just remember that if you delete the backup, you will lose everything. You will be able to download your apps again but if you have photos in the camera roll you will lose them.
Go to Settings>iCloud>Manage Storage>Your iPad name (under backups)>Delete Backup. That should remove everything.
If you do that, reboot the iPad when you are done and see if that helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
I'm still not sure as to exactly what you are trying to do. If you are using iTunes on your computer, why don't you just backup to iTunes and you will not have to worry about the space that you have in iCloud.

Similar Messages

  • Apple iPad will not load my updates. Just a blank screen

    iPad will not load updates. Just a blank white screen

    Try this workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • Can not download anything, a warning my security settings will not allow the download. please help

    can not download anything,  a warning, "securiy setting will not allow the download"

    Hi,
    Are you using IE? If yes, please follow this to fix.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows will not load or install, PLEASE HELP SOON

    I turned on my computer today and it said:
    Windows could not start because the following file is missing or corrupt:
    \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    I restarted and it worked fine.
    I then turned it on again later, and got the same message.
    After re-seating the cables, cutting the power, trying to start in safe mode, etc, etc, I decided to try a repair.
    The repair just got stuck when I pushed '1' for C:\WINDOWS. It just did nothing after that.
    I tried to reformat. I put in the Windows XP disc and it loads up and I push F8 and it says "Searching for previous installations of Windows...". It did that for about ten minutes with no HDD activity until I finally shut it off.
    Could ANYONE help me with this??? I am in college, and need to use this VERY SOON. It is 8:42pm RIGHT NOW and I need help BADLY. If at all possible, I would like to re-install Windows rather than reformat as there are some very important files that I need to back up before I can do a full reformat.

    You haven't said anything about your system configuration, or whether it has had previous problems. This information would be helpful.
    Make sure that the boot drive is correctly indicated in the bios. If you have more than 1 hard drive, I would temporarily remove the second one (assuming the OS is on the first drive). I've noticed that Windows Repair install seems to easily get confused by the disk configuration with the Neo Platinum.  This would also help if your power supply is marginal (if you diconnect the power as well).
    A helpful thing to have would be a Knoppix cdrom. this is a cd bootable version of Linux that can be used to inspect your hard disk contents, and key files such as the boot.ini file etc. Also, if Knoppix runs, you can have some confidence that key system components are functional.
    Robert

  • My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    Was a Restore one of the things tried.?  [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]

  • How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion os. I did purchase Wondershare for burning but it will not load the iMovie events or projects

    How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects

    There is no proper substitute for iDVD.
    Why is there no iDVD on my new Mac?
    https://discussions.apple.com/docs/DOC-3673
    UPDATE & ADDENDUM:
    But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
    Poster jhb21939 posted this in another thread:
    “when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
    I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
    In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
    In response, Old Toad posted this solution:
    “You can still use it one all of your Macs.  If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer.  After you're done reset the time back to the correct time.” He added this comment:
    “It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
    I've been able to use the installer even without setting back the date.  I just clicked on the Continue button and it would work as expected.  For some it would not continue unless the date was set back.”
    The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
    Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

  • IPhoto will not load the iPhoto library.  When I select "show all windows" the library does appear but cannot open it.  I am on version 8.1.2 and using Maverick.

    iPhoto will not load the iPhoto library.  When I select "show all windows" the library does appear but cannot open it.  I am on version 8.1.2 and using Maverick.

    I was able to get it fixed. I had received some responses and they had me
    recreate the library I believe.  It's been a while so I cant remember
    exactly what I did. I have since upgraded to the latest i photo version and
    have had no problems with it.
    Brian
    On Friday, November 7, 2014, Apple Support Communities Updates <

  • Ipad will not load new email

    ipad will not load any new emails.  i have one through outlook and one gmail.  neither will load anything new.

    Do you have a wifi or 3 g connection?
    Did it used to work?  What does the mail app do when you open it?  Is there the little circle at the bottom, checking for new mail.
    Have you checked the accounts from safari, or a computer, to see if it is an ISP problem?

  • I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
    Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

  • My ipad will not open the app store...any suggestions?

    My ipad will not open the app store...I have turned it off and back on and it still just says loading and does nothing.

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Will not load the webpage.

    It will not load the web page. It doesn't give an error message or say it timed out. The circle on the tab will spin for a little while then just stop, and nothing comes up. I'm uninstalled it, then re-installed it and still giving me this problem. I've checked for updates and I'm running the latest version.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though.  I've reset the Apple TV and the modem. No change. help?

    Since yesterday my Apple TV will not load the movies or tv at all. I select it from the home screen, it goes black, tries to load then goes back to the home screen. YouTube and Netflix works though.  I've reset the Apple TV and the modem. No change. Any ideas what the problem is?

    Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating
              http://support.apple.com/kb/TS4526

  • 8.1 will not load the dvd driver error 39

    The dvd played with no problem in 8, worked fine. I loaded 8.1 now it will not load the driver, says error 39. I uninstalled and reinstalled still the same.  I got a external working DVD, plugged it in and the same code, same problem. windows
    8.1 does not load the DVD driver. 
    what is the fix I understand it 8 does not play dvd  movies, video this does not even recognize the player for music CD
    jack walsh

    Please repost your inquiry in the
    Windows 8.1 Community Forum.  Thank you!
    Carey Frisch

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • Hello my computer will not load the photoshop program as it has Inefficient disc space how can i fix this please?

    hello my computer will not load the photoshop program as it has Inefficient disc space how can i fix this please?
    Regards
    Geoff

    Hi The Lad,
    If you have "INSUFFICIENT" disk space, then you can try and change the install location while performing the installation of the desired product. I am not sure when the error message would pop up saying that the disk space is "INEFFICIENT". Could you please share a screen shot of the error message along with the system information.
    Cheers,
    Kartikay Sharma

Maybe you are looking for

  • Send String[][] type to pl/sql procedure from function in App.module

    Hi, I use jdveloper 11.1.1.3.0 I have a pl/sql procedure. the input type argument is 2-dimensional array(TAR) : types: create or replace TYPE ARRAYWEB as varray(160) of VARCHAR2(200); create or replace TYPE TAR as table of ARRAYWEB; Procedure: PROCED

  • Wireless Keyboard

    wireless Keyboard Posted: Sep 10, 2009 6:28 AM Reply Email The letter "a" is not working on my wireless keyboard. Not sure if my kids broke it or if it is something else. Is there anything I can do? I'm sick of copying and pasting the "a" to get anyt

  • WAS & LDAP ume

    Hi, Is there a possibility to enable UME on Java WAS to use database & LDAP directory even if the WAS is Developer Workplace or Java Sneak Preview ? When I try to change UME configuration in UME configtool and save change, error ocurs. When I do that

  • Transient Sybase SET CHAINED Tx exception.

    Hi, I've been experiencing a bit of strange behavior with WebLogic 6.1 SP3 and Sybase 11.9.2.4. We are using the Sybase driver that comes with WL 6.1. We are seeing occasional SQLExceptions concerning transactional modes for stored procedures running

  • CASE causes strange aggregation issue.

    Hi I have a subject area; Journals; which has a dimension: - Budget Type (Actual or Budget), a dimension GL Code (Cost Centre) and a fact folder BUDGET FACTS which has a field amount which aggregates by default as SUM. (Simplified - but I think this