HT5287 windows 8 will not down load error not os x support

keep on getting error message windows not supported by os x.

http://support.apple.com/kb/HT5628?viewlocale=en_US&locale=en_US

Similar Messages

Windows 8 will not boot

Windows 8 will not boot, gives Bad_System_Config_Info error.
It will not boot from disk, let me refresh, or let me reset my windows system.
A couple of times i have gotten windows to boot from the disk and it asks if i want to instal windows 8 or there is a tab to repair my computer.
Should i just go ahead and click instal windows 8, and then backup that fresh instal with my backup drive?
Or will this complicate the problem?.........
I am running OS X 10.8.3 Macbook pro retina
Thanks
Todd

Wow, how about you guys just answer the dude's question instead of posting useless garbage. thanks for wasting everyone's time.
The only way I know of fixing this right now is unfortunately by doing a clean install. Thats not to say however that you won't run into the same problem down the road. To be honest, even tho Templeton's answer was useless, he's right. Seven is currently way more stable.

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????

If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5. If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version. Try contacting support using chat and explain your situation to see if they can help.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
If you did purchase 4.4 then that should be sufficient to use to activate 5.
I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say.

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

Windows 10 will not install

Tried to install Windows 10. It has failed five times now. All updates are up to date, I have tried using the windows fix tool, but it still will not install. Has anyone else had issues or tried?I am getting really fed up with it now.Errors:-8024001E8024601080240020 Any help? Thanks.

80246010 error message. Windows 10 will not install. Shows as failed in Windows update, help anyone?

TS3212 every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330

every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Certain Windows updates will not download on any PC on our network

Hi,
We've had a problem that seemed to develop a couple of months ago in that certain Windows updates will not download to any PC on our network, most notably IE11 and .NET 3.5.1 updates. Most others will download and install with no problem at all.
I have tried running the Windows Update Fixit, I have tried deleting the /Windows/SoftwareDistribution folder, I have tried the System Update Readiness Tool, I have added the various Windows Update server URLs to our firewall whitelist, I have
tried a clean boot, but to no avail. Downloading and installing the affected KB patches manually works fine though.
When I connect any of our PCs directly to an external router the updates download and install fine. It's only when connected to our network (which comprises a Peplink WAN load balancer, Cyberoam CR25iNG security device, Windows 2003 domain controller
& Arista 10Gig switch) that the problem exists.
Most updates download successfully but others only get to a certain percentage downloaded, most commonly 45%, although I'm not sure if that's a meaningful figure.
For example, the most recent batch of updates all download and install fine except for KB2982378, KB2894844, KB2972211 & KB2973112. Is there something those updates have in common that something on our network could be blocking?
I'm really unsure where to try looking next, so if anyone has any suggestions they would be very welcome please.
Thanks,
Matt

Hi Matt,
When you connect to an external router directly, does your network location change to private or still domain network?
I suspect this is related to some firewall setting, even related to your network security device.
Please check or upload the WindowsUpdate.log ( %windir%\Windowsupdate.log), we can find some information about downloading phase.
Alex Zhao
TechNet Community Support

TS3212 windows dep will not let me run itunes

windows vista will not let me open i tunes dep message can anyone help please

Try updating your QuickTime Player to the most recent version. Does that clear up the DEP errors in iTunes?

Windows 7 will not detect the wireless adapter on my Dell D610 laptop

Windows 7 will not detect the wireless adapter on my Dell D610 laptop
Any workaround?

hey guys.... i believe i have some light for you all. I gave my daughter a D610 which came pre-installed with Linux (ubuntu). She did not like it so i loaded windows 7 and guess what? no wifi.
Unknown Device listed on device manager. to make the story short, after almost returning the laptop and spending 2 days looking for drivers everywhere I decided to reload Ubuntu because the wifi always worked. Then going a little deeper inside linux hardware
specs I listed all the hardware using the command lshw from linux shell and what shows up as wifi interface? Atheros AR5001x.
Problem was almost solved. The adventure now was find the driver for Atheros AR5001x that worked for windows 7. And now just to finish this story even faster, the diver is xp32-5.1.1.9.
Unfortunately after downloading the driver I did not save the website. I have the file with me if you need.
Just send me a message and i will be more than happy to email it to you.
Happy New Year for all!!!!

Windows 8 will not activate with new SSD (second) hard drive

I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.

Hi badgerbuzz,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Windows 8 will not progress further than 66%?

Windows 8 Will not Progrees further thaan 66% on Bootcamp installation......any ideas?

maybe you made the partition too small?
maybe the dvd is corrupt ?

There is a 3 inch section of the window that will not recognize the mouse. It will not let you click on the icons or screen in any way in this section under the address bar. It is only in firefox where this is a problem

There is a 3 inch section of the window that will not respond or recognize the mouse. It will not let you click on the icons or screen in any way. This is the only program we are experiencing this problem with.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

HT5287 windows 8 will not down load error not os x support

Similar Messages

Maybe you are looking for