HT5293 How do I run a Raspberry Pi on an iMac

Raspberry Pi supplied with a HDMI cable?

Thanks for that Varjak, sorry it took me so long to reply.
I've been fiddling with this Pi for weeks and eventually got it up and running on an old CRT telly.
Bought the kit from Maplin, but it would not run with the supplied power supply, so bought a PiHub.
Turning out expensive. Still, great fun.
Thanks again

Similar Messages

  • How do u run office mac on the new imac

    error message says cnnont open application microsoft word because power pc applications are no longer supported  how do i run office mac on the new imac

    Office 2004 probably was the best MS Office ever, works fine on PPC machines, badly enough on intel machines, unusable in Lion.
    Office 2008 was a step back, runs badly on PPC machines, not very good for newer, Intel macs either.
    Office 2011 seems the only rational solution for newer macs running SL and Lion.
    There are free and good solutions, OpenOffice, LibreOffice and NeoOffice, all based on OO language. Apple’s iWork also offers a good solution, may be a little problematic if you currently exchange files with Windows users, mainly if you must keep the original format, including inserted data.
    Summing up:
    - if you frequently / currently exchange data with Windows users, MS Office is the best solution from reasons of comfort
    - if not, any free office quoted above makes its job fairly well
    - iWork is also good, and smoothly integrated with Mac OS X, of course
    If you mainly need word processing, Mellel and / or Nisus are (very) good alternatives, may be tested for 30 days, then decide.
    The offer is, as you may see, rich, richer than in Windows, but this also means, as the French say, l’embarras du choix, difficulty of choosing something!

  • How can I run 2 Mac Systems on an iMac using VMWare Fusion

    Hello,
    - I'm using an iMac, system 10.10.2.
    - I bought VMWare Fusion 7.1.1.
    I would like to use VMWare on my iMac (Yosemite) and run another Mac OS (10.7.5) in parallel by using VMWare. I have no idea how to do this, I don't even know if it's even possible.
    The operating systeme 10.7.5 is installed on another Mac of mine (a Mac Book Air). I made a carbon copy of the whole operating system.
    My aim is to be able to jump from my iMac (running OS 10.10.2 with VMWare Fusion installed) to a virtual Mac OS 10.7.5 (the carbon copy of my MacBookAir)
    Can anyone help?
    Thank you very much.

    Some searching at the VMware Fusion site should provide you with an answer.

  • HT5293 my xmoviex doesn't work .how could i run it?

    my xmoviex doesn't work .how could i run it?

    What kind of email accounts are they?
    Are you able to receive or send?

  • How Can I Run A SQLJ Normal Project In SAP NWDS

    I have a question about SQLJ in SAP NWDS.
    1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
    2.I created a java normal project including the above java dictionary project.
    3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
    4.I coded the normal project,and export the project .jar,everything is ok.
    <b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
         at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
    Exception in thread "main"</b>
    How Can I Run A SQLJ Normal Project In SAP NWDS?
    PLS Help me and don't let me alone!

    Tony,
    Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
    Chill out!!!
    Sukanta Rudra
    Note: If helpful, plz donate some points.

  • How do I run query per report page?

    I have a report with two subreports which both need queries to run on the fly per supplier(per report page).  All the other subreports on the page as well as the main report queries are loaded in advance before the report and includes all records needed for all suppliers.  However, these two querys that I'm trying to have run per report though can only be loaded one at a time because of the way these queries are formated (it allows a bar graph to show a label for only the current supplier on the x-axis and all other suppliers will display a "" for x-axis label, effectively only showing one legend label per report).  I already have the necessary parameter needed for the report(Pm-Supplier) so how can I run an oracle query on the fly per report page? 
    Eric
    Query 1:
    select vendor,supplierloc,commodity,ip from (select c.Vendor, q.supplierloc, c.commodity,SUM (q.indexpoints+q.lateindexpoints) AS ip
    FROM qa_occ q, glovia_prod.c_vencom@GL7TEST c
    where q.occdate BETWEEN TO_DATE ('4/1/2006', 'mm/dd/yyyy')
    AND TO_DATE ('3/9/2007', 'mm/dd/yyyy')
    and c.vendor=q.supplier
    and (upper(trim(foundby)) not like '%MARKET%' or foundby is null)
    and (upper(trim(foundby)) not like '%TRIAL%' or foundby is null)
    and (upper(trim(rank)) not like '%MARKET%' or rank is null)
    and (upper(trim(rank)) not like '%TRIAL%' or rank is null)
    and nvl(void,'N') = 'N'
    and q.supplier= @SUPPLIER
    GROUP BY C.vendor,q.supplierloc,c.commodity) qa
    union
    select '' as vendor,supplierloc,commodity,ip from (select c.Vendor, q.supplierloc, c.commodity,SUM (q.indexpoints+q.lateindexpoints) AS ip
    FROM qa_occ q, glovia_prod.c_vencom@GL7TEST c
    where q.occdate BETWEEN TO_DATE (@BegDate, 'mm/dd/yyyy')
    AND TO_DATE (@EndDate, 'mm/dd/yyyy')
    and c.vendor=q.supplier
    and (upper(trim(foundby)) not like '%MARKET%' or foundby is null)
    and (upper(trim(foundby)) not like '%TRIAL%' or foundby is null)
    and (upper(trim(rank)) not like '%MARKET%' or rank is null)
    and (upper(trim(rank)) not like '%TRIAL%' or rank is null)
    and nvl(void,'N') = 'N'
    and q.supplier<> @SUPPLIER
    GROUP BY C.vendor,q.supplierloc,c.commodity) qa
    order by commodity,ip desc
    Query 2:
    select c.name as name,c.vendor,c.ven_loc, SUM(q.indexpoints+q.lateindexpoints) as ip
    from qa_occ q,glovia_prod.ven_loc c
    WHERE q.occdate BETWEEN TO_DATE (@BegDate, 'mm/dd/yyyy')
    AND TO_DATE (@EndDate, 'mm/dd/yyyy')
    and (upper(trim(q.foundby)) not like '%MARKET%' or q.foundby is null)
    and (upper(trim(q.foundby)) not like '%TRIAL%' or q.foundby is null)
    and (upper(trim(q.rank)) not like '%MARKET%' or q.rank is null)
    and (upper(trim(q.rank)) not like '%TRIAL%' or q.rank is null)
    and q.supplier is not null
    and nvl(q.void,'N') = 'N'
    and q.supplier=@SUPPLIER
    and q.supplier=c.vendor
    and q.supplierloc=c.ven_loc
    GROUP BY c.name,c.vendor,c.ven_loc
    union
    select '' as name,c.vendor,c.ven_loc, SUM(q.indexpoints+q.lateindexpoints) as ip
    from qa_occ q,glovia_prod.ven_loc c
    WHERE q.occdate BETWEEN TO_DATE (@BegDate, 'mm/dd/yyyy')
    AND TO_DATE (@EndDate, 'mm/dd/yyyy')
    and (upper(trim(q.foundby)) not like '%MARKET%' or q.foundby is null)
    and (upper(trim(q.foundby)) not like '%TRIAL%' or q.foundby is null)
    and (upper(trim(q.rank)) not like '%MARKET%' or q.rank is null)
    and (upper(trim(q.rank)) not like '%TRIAL%' or q.rank is null)
    --and q.supplier is not null
    and nvl(q.void,'N') = 'N'
    and q.supplier=c.vendor
    and q.supplierloc=c.ven_loc
    and q.supplier <> @SUPPLIER
    GROUP BY c.name,c.vendor,c.ven_loc
    ORDER BY ip DESC

    You can't, CR considers each subreport as a separate report and therefore it makes a new connection and runs the SQL for the subreport.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • How SAP standard run the interest calculation in AR module

    Dear expert,
    would like to seek for your advise, how SAP standard run the interest calculation in AR module ?
    Also advise,does the interest calculation generate the interest base on the dunning run?What are relationship between interest calculation generate ?
    What are the T-code for running the interest so that able to generate the interest posting according to baseline due date?
    On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
    Between, do you have any ideal the Interest Indicator ZB stand and reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
    Please help.
    Regards,
    Karen

    Hi,
    Thank you for the promtp reply.
    I still have query would like to seek for your advise.
    1.Does the interest calculation generate the interest base on the dunning run?For example, the interest is only can be post/generated when there is dunning run and vise versa.
    2.What are relationship between interest calculation generate ?Does interest generation depand on the dunning run?
    On top of that, does SAP have standard AR interest calculation report and what are the T-code ?
    3.Between, do you have any ideal the reminder date it is the last reminder date,waive,KIV and charge Interest and also noted item amount mean for in the AR Interest Calculation report?
    4.For posting use F.2B and that will calculate interest on open items of customers. Does this posting is post as noted item or posting document? Beside, do we every day need to run this posting  F.2B in order to update the AR interest calculation report and post the interest for the overdue invoice?
    5.Do you have any reference link/document /SAP notes on calculate interest on arres F.2B?
    a)How the program calculate those overdue invoice for example: does sap calculate the interest  base on interest + due amount until the customer made the payment?
    b) If customer made payment on the due amount and not the interest and vise versa? How theF.2B program logic work on the calculation ?
    Please help.
    Regards,
    KH

  • After the update I don't know how to close running apps? I recall double clicking the main button then hold one app until they begin a jiggling motion. But that no longer works.

    How do close running apps?

    You still double tap the home button and the apps are lined up across the screen. Swipe up on the app preview thumbnail - drag it up off of the screen - and that will close the app.

  • How can I run 2 keynote presentations on 2 different macs with only one keyboard?

    How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How can i run 2 i tunes accounts on the same computer without songs duplicating?

    my wife and I both have ipods, how do you run an account each on the same computer without files syncing on both ipods/ libraries?

    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • How do I run Safari with a proxy on start up by command line?

    Hello,
    I am using a piece of software called Sahi to perform automated testing of websites. It uses a local proxy to accomplish this task, so it runs the browser with parameters needed so that that instance of the browser is running with the proxy settings. For some reason it's not correctly setup by default with Safari on the Mac. But it has a configuration file where you can set the command line parameters that it runs the browser with.
    So when I use Sahi in its default configuration, it doesn't work because the proxy is not configured, and I get an error ( http://sahi.co.in/forums/discussion/4607/sahi-doesn039t-work-with-safari-5-0-1-o n-macosx )
    So I need to set the proxy. When I set the 127.0.0.1:9999 proxy in the System Preferences it works. My question is how do I run Safari so that it provides the proxy settings as a command line option?
    This way I can add the command line option to the Sahi configuration file so that it runs Safari properly. I don't want to have the proxy settings system wide because I need other programs to work. I don't want to have the proxy settings set for Safari permanently because I also need to be able to run Safari normally outside of this special context.
    Any assistance would be appreciated.

    I should mention this is Safari 5.0.1

  • How can I run a vga monitor and projector together on my Mac Pro 15"??

    How can I run a vga monitor and projector together on my Mac Pro OSX 15"?

    You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

Maybe you are looking for