HT5295 My I hang up a call, my podcast restarts even when I hadn't been listening to it before call

My I hang up a call, my podcast restarts even when I hadn't been listening to it before call.
Is there anyway to prevent this other than closing the Podcast App each time I stop listening?

happens to me too
Iphone 5, 7.0.4 64GB
it plays the last thing I had used with only audio. if I was listening to a podcast before then it'll load that up. but since closing my podcast and not even using the apple music app. now it loads the first song in my play list. and its just this one song.
force close the app and not even use the music app for weeks and its been forced closed the last time,
it'll load up the same song. randomly, and I havent used my podcast app in months so it hasnt loaded that app
if it has nothing else it'll load the music app.
i've done a delete all settings and that hasnt helped
wether its head phones when I workout or bluetooth in the car, has happened to both
https://discussions.apple.com/thread/5843120?tstart=0
same issue except he's actually wiped the phone and started over.

Similar Messages

  • After adding plug-ins to block ads, my firefox no longer opens--it hangs/freeze--i have tried to restart, even deleted firefox and downloaded a new version--to no avail! please advise--

    Last night I aded a few plug-ins to block ads including Google's--after restarting my computer (Mac OS X 10.6.8), my firefox no longer opened, i.e. it hangs/freeze when I open it--I have tried to restart, open in safe mode, even deleted firefox altogether and downloaded a new version, to no avail! Please advise! I have been trying to revive Firefox for hours today--

    Hey rumon,
    Have you tried starting Firefox in Safe Mode? Hold down "option" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
    There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article. If you've recently upgraded, you might want to check out [https://support.mozilla.com/en-US/kb/latest-firefox-issues#w_firefox-crashes-when-i-start-it this article] as well.
    Hopefully this helps!

  • Application hangs on setVisible call in Solaris 8

    I have a Swing application that I am having trouble with. The swing part of it is simple enough, however it does use a C++ API with JNI. It all works perfectly on Linux. However in Solaris 8 the application hangs on the call to either myFrame.pack () or myFrame.setVisible (true). It simply never returns from either of these functions when called. It doesn't crash.
    I have commented out all of the JNI stuff to eliminate that as a possible cause. Oh and I am using the -d64 option on the JVM because the JNI library is 64 bit.
    Any thoughts?

    First question is - did you get a thread dump?
    On Solaris, if you run the app in a terminal window, then type C-\ (control-backslash) you get a thread dump. What you'll be looking for is multiple threads "waiting for monitor" on the same object.
    - David

  • Music plays after hanging up phone call

    Hi,
    I love my Xperia Z2 but for some reason if I have music paused, then I take a phone call, when I hang up the call, the music starts playing. I understand it should do this if the music is playing when the call comes in, but not if the music is paused, right?
    Please help!

    Hi, 
    Do this happen even if you don't hang up yourself? (If you wait for the other part to hang up) 
    I would suggest that you try to boot your phone into safe mode to see if the problem may be related to any 3rd party app that you have installed in your phone:
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    What are your thoughts about this forum? Let us know by doing this short survey.

  • Why do I need to login to hang up a call?

    If I'm talking on a call for more than 3 minutes (my auto-lock settings), my phone locks. When I want to hang up the call, I have to login and then I can click End Call (or whatever the button says).
    Is there a way to hang up a call without loging in first? Or is there a setting that doesn't auto-lock when I'm on the phone? SUPER ANNOYING!

    I'm not sure. I have a 5S and use the Touch ID. I've used the device with a Bluetooth, but hung up from that. I've used it on a speakerphone conversation, a long one and then reached over, touched the screen, it was still on the call screen and touched End Call. The same with calls holding it to my ear. Something is different, but I'm not sure what. I'm not sure there is nothing wrong with the sensor, but if you believe their isn't, then that is your choice. Good luck.

  • After having iso7 my phone get hanged while answering/calling ?

    after having iso7 my phone get hanged while answering/calling ?

    Hi varinder22,
    If you haven't already done so, you may want to restart or reset the iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes. Please be sure to backup your iPhone first.
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    http://support.apple.com/kb/HT5262
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Help. new ios7 has made my iphone 4 a slug.Intermittent text and call usage, can't hang up from calls, dead screen, etc.  Mistake to upgrade.

    Ever since I upgraded my iphone 4 to the new ios7, I have intermittent use of my texts...cannot send or receive.  I cannot hang up phone calls...the screen is black and I don't have an END button.  I have deleted nearly everything fome my phone, about 8 gb free at the moment on a 16 gb phone. Can anything be done.  I should have never done the upgrade and now I can't go back.  Help.

    Tried this about 20 times already. Can send about two-three texts and then can't receive or send. Even tried a reset to factory...still crap.

  • When I accept or send a call on FaceTime, it does not connect. It will just hang up the call, how do I fix this?

    when I accept or send a call on FaceTime on my macbook pro, it does not connect. It will just hang up the call, how do I fix this?
    This has been going on since about June. It is annoying that I cannot use FaceTime on my computer. I then switch to using my phone or iPad, which work perfectly fine. It is just specifically my computer. Help Please

    when I accept or send a call on FaceTime on my macbook pro, it does not connect. It will just hang up the call, how do I fix this?
    This has been going on since about June. It is annoying that I cannot use FaceTime on my computer. I then switch to using my phone or iPad, which work perfectly fine. It is just specifically my computer. Help Please

  • Veer chimes I have a dropped call each time I hang up my calls

    Everytime of late I hang up a call on my Veer 4G with AT&T, my dropped call messages pops up and chimes. What causes this and how do I correct the problem?
    Post relates to: HP Veer p160una (AT&T)

    I am having the same problem with my Veer.  It gives me the same message weather I hang up by touching the and call button on-screen, hit the button on my headset, or the person on the other line hangs up. 

  • Z10 hard to hang up incoming call

    why z10's screen too minimalist, so thete is no button for hang up incoming call. it is not easy to scroll down the sreen for answering incoming call. at last my incoming call become miss call. can you fix it?

    My "hang up"button is right there at the bottom. When you scroll down are you putting your finger right on the bar? And... are you sill on 10.0 OS? It's a little pokey.

  • IPhone dropping calls even when it had bars

    My I phone4 is constantly hanging up or dropping calls in the middle of a conversation. Is there a way to fix this issue?

    Well, for some reason I have trouble on rare occasions with one particular person I talk to. What makes it even weirder, it happens with both their landline and his cell phone which he says are on different networks (T-Mobile and Verizon, I think). When it acts up, I can lose the call several times in just a few minutes.
    I took my phone into the apple store to have them check. They said it didn't show any dropped calls which, they said, meant it had to be a problem with the other network.
    That may be true, but it could also be an excuse. I've yet to have this happen when talking to anyone else though.
    Another possibility is that you have the proximity sensor problem. Since I saw you only posted once, you may not be familiar with it but, in short, the screen can come on, even when against your ear and if the screen is on, your cheek can activate buttons, including the one to end the call! You could also get muting, speaker phone, even calling someone else!
    There are tons of discussions about it here and arguments over what the cause is (one thread is 90 pages long and it was a continuation of two previous very long threads!).
    Check what version of the operating system you have. The original was 4.0. The next update (4.0.1) basically just changed the signal bar calculations with the result that they are more accurate, but will give fewer bars for the same signal on 4.0.
    Next came 4.1 which did something to change the sensor issue. It worked for some, not for others, and some said it made it worse! But, in general, it seemed to increase the power to the sensor and I'd say helped more people than it hurt.
    The latest version (4.2.1) didn't say anything about changes in sensor operation, but I know from my tests they definitely changed something.
    As before, some say it got worse or didn't change - but I've only seen a handful who said that so it may be nothing more than the amount of problems that seem to happen with any update going out to millions of people. A larger number have said it finally fixed theirs.
    Those are the two main things I'd look for - a problem that only happens with certain calls, especially if on a particular network. And the possible proximity sensor problem.
    One thing you can do to check the sensor is to go to your settings and turn the screen brightness to max (probably turning off the automatic option). I found that when the screen came on, I could miss it at the usual setting, but on bright, it got my attention. This also depends on how you hold it. If against your cheek, it may not make any difference since you'd be covering the screen up.
    There is a app for 99 cents called "Call Guard". After starting a call, you run the app and it gives a blank screen so you can't activate any buttons. You can still hang up by pressing the top button or by pressing the home button to quit the app and then going back to the phone app to hang up.
    But one really nice thing about the app is that when active, it marks and numbers every time your face touches the screen (if the screen ever comes on). So you could use this for awhile and check after each call to see if there were any touches. If not, the problem probably isn't the sensor.

  • My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

    Do you have a cellular plan with data and SMS activated?

  • I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

    So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

    Thanks for your reply via email/msg. He wrote:
    If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
    Xeon 4 core - E5.1620v2
    Xeon 6 core - E5.1650v2
    Xeon 8 core - E5.1680v2
    Xeon 12 core - E5.2697v2
    I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
    My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
    I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT?  I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
    SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro      was announced Last year, barely made the December mark, then pushed to January, then February and now April.
    Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
    PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

  • IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational.

    IPHONE 5:  can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network."  This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off.  ATT went through the standard protocol - resetting network, resetting sim card, etc.  No changes.  Other phones working fine in same region with same carrier.  Apple's solution is to restore software, but haven't gone there yet.  Anyone successfully addressed this/these issues?   

    I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

  • What can be wrong with my iPhone 4?  There is no sound from incoming calls, SMS and even when I play music.  I already checked that it's not muted, volume is high and not set to "vibrate mode."

    What can be wrong with my iPhone 4s.  There is no sound from incoming calls and SMS even when I try to play music.
    I already checked that it is not muted, volume is high and not in " vibrate mode."

    What can be wrong with my iPhone 4s.  There is no sound from incoming calls and SMS even when I try to play music.
    I already checked that it is not muted, volume is high and not in " vibrate mode."

Maybe you are looking for

  • Hi, how do I get my calendar to update across Macbook and iMac Desktop?

    I have a Macbook and an iMac Intel desktop. I want to use iCal on my desktop so that my macbook can be updated at the the same time. How do I do this? If anyone has any ideas how I can also access the same docs online from both computers (iMac not bi

  • Add editable fields in smartforms

    Hi, I'm working with smartforms (CRM) and i wonder to know if its possible to create a kind of blank fields that allow the user to insert some free text right before print the form? Thanks a lot in advance, Nuno Moreira

  • Apple DVD Player software not reading SPRM 4 correctly.

    I am a DVD author and have recently run into an issue with Apple DVD Player not reading SPRM 4 (current title) correctly. I know this isn't the Apple DVD Player forum, but there doesn't seem to be one for that application, so here I am... I have a di

  • Photos messed up in my catalog now that I'm using Trial of LR5

    I recently started a trial of LR5.  I chose to update my LR4 catalog to be used in LR5, but first I copied the whole Lightroom folder for back-up.  So several of my photos in the updated catalog are messed up and say their's an error accessing them. 

  • Pre 7 - HD 1080i 16:9 stills

    Hello, I probably won't use all the terms correctly, but here's my best shot: I am editing HD 1080i video and trying to create DVD menus.  I want the backgrounds to be still shots from the footage.  When I locate the frame I want and use the camera i