HT5295 What are the basics of creating and distributing Podcasts?

What are the basics of creating and distributing Podcasts?

Search the web for "creating podcasts" and you'll find a plethora of information.
Regards.

Similar Messages

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What are the tools to create a digital magazine for ipad version and how can be place it in newsstand?

Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..

We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck.

What are the basic .jar files to be set in web dynpro project classpath

Hi,
I am having a problem while customizing the ESS. I used DTR, DC and imported configuration. After that, I created project from one of the DC(say ess/jp/addr). Later when I open an iView from any Web Dynpro component, I am getting lot of errors without even making any modifications.
I closed the project and reopened it and reload & rebuilt, but it doesn't solved my problem. In my classpath settings I couldn't find any jar files except the jre_lib. Could you please let me know what are the basic jar files we have to set in classpath and where to get them from. We are using NWDS 7.0.06 version.
Can you please let me know how to solve this or any other way to work around this.
It's an urgent to be fixed as early as possible, plz help me out.
Thanks & Regards,
Raj

Hi Julien,
Thanks for your reply.
We imported the the specified SCAs in our track.
we are getting the following errors.
Kind Status Priority Description Resource In Folder Location
Error The import com.sap.xss.per cannot be resolved CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 18
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument fpm of the method loadConfiguration CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 113
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument currentPerspective of the method getNextPerspective CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 127
Error com.sap.pcuigp cannot be resolved (or is not a valid return type) for the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
Error com.sap.pcuigp cannot be resolved (or is not a valid type) for the argument perspective of the method getCAPState CcPerAddressInterface.java NS1_XSSTR_Dessusaddrsap.com/gen_wdp/packages/com/sap/xss/hr/per/us/address/cc line 137
we manually set below .jar files in classpath settings.
pcuixssfpm.jar
pcuixssutils.jar
logging.jar
essper.jar
Is there any alternative to work around.
Thanks & Regards,
Raj

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the differences between Logos and LogosXT?

What are the differences between Logos and LogosXT?

Logos XT is a networking middle-layer maintained by the LabVIEW Network Technologies and Security group. Logos XT provides a thin layer on top of TCP/IP to simplify some common network tasks.
The underlying foundation for NI networking is called Logos.
I believe that the basic idea is Logos is what is going on behind the scenes at the base level and Logos XT lets you build your own networking protocols on top of Logos. Logos XT would be used if you want to make your own networking protocol instead of using TCP/IP or UDP.
Scott A
SSP Product Manager
National Instruments

What are the differences between Essbase and Planning?

What are the differences between Essbase and Planning?

Planning is an enterprise application built around the Essbase OLAP engine.
You can create planning applications with Essbase only, but Planning uses best practises and has built-in enterprise features.
Brian Chow

What are the differences between iphone and iphone 5c 5s?

What are the differences between iphone and iphone 5c 5s?

Read here:
http://www.apple.com/iphone/compare/
The iPhone 5C is basically the original iPhone 5 in different colors.
While the 5S gets the improved hardware.
Read the link above for a feature comparison.

What are the basic element of Base configuration of an oracle Database ?

What are the basic element of Base configuration of an oracle Database ?

889543 wrote:
What are the basic element of Base configuration of an oracle Database ?check this link
http://www.dbnest.com/entry/194/
and if you want to configure oracle installation click below link .
http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/install002.htm
--neeraj

What are the differences of creating a physical standby database with ASM?

I want to create a physical standby database for my 10g(10.2.0.1) database. But it is using ASM. Is it possible to create a standby database for a database using ASM?
What are the differences of creating a physical standby database with ASM?

tell us what your research shows and we'll try to
validate it. I am simulating Oracle ASM on a PC and I want to try
DataGuard on it now. So I am trying to create DataGuard
on an ASM system. The purpose is only learning and test.That's telling us how you are researching, not what you have observed.
Your research could have included looking at the documetation, and you might have found http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#sthref1642
which discusses exactly what you are looking for.
Message was edited by:
Hans Forbrich

What are the Relations between Journalizing and IKM?

What is the best method to use in the following scenario:
I have about 20 source tables with large amount of data.
I need to create interfaces that join the source tables into target tables.
The source tables are inserted every few secondes with about hundreds to thousands rows.
There can be a gap of few seconds between the insert of different tables that sould be joined.
The source and target tables are on the same Oracle instance and schema.
I want to understand the role of: 'Journalizing CDC' and 'IKM - Incremental Update' and
how can i use it in my scenario?
In general What are the relations between 'Journalizing' and 'IKM'?
Should i use both of them? Or maybe it is better to deelte and insert to the target tables?
I want to understand what is the role of 'Journalizing CDC'?
Can 'IKM - Incremental Update' work without 'Journalizing'?
Does 'Journalizing' need to have PK on the tables?
What should i do if i can't put PK (there can be multiple identical rows)?
Thanks in advance Yael

Hi Yael,
I will try and answer as many of your points as I can in one post :-)
Journalizing is way of tracking only changed data in your source system, if your source tables had a date_modified you could always use this as a filter when scanning for changes rather than CDC, Log based CDC (Asynchronous in ODI, Logminer/Streams or Goldengate for example) removes the overhead of of placing a trigger on the source table to track changes but be aware that it doesnt fully remove the need to scan the source tables, in answer to you question about Primary keys, Oracle CDC with ODI will create an unconditional log group on the columns that you have defined in ODI as your PK, the PK columns are tracked by the database and presented in a Journal table (J$<source_table_name>) this Journal table is joined back to source table via a journalizing view (JV$<source_table_name>) to get the rest of the row (ie none PK columns) - So be aware that when ODI comes around to get all data in the Journalizing view (ie Inserts, Updates and Deletes) the source database performs a join back to the source table. You can negate this by specifying ALL source table columns in your PK in ODI - This forces all columns into the unconditional log group, the journal table etc. - You will need to tweak the JKM to then change the syntax sent to the database when starting the journal - I have done this in the past, using a flexfield in the datastore to toggle 'Full Column' / 'Primary Key Cols' to go into the JKM set up (there are a few Ebusiness suite tables with no primary key so we had to do this) - The only problem with this approach is that with no PK , you need to make sure you only get the 'last' update and in the right order to apply to your target tables, without so , you might process the update before the insert for example, and be out of sync.
So JKM's provide a mechanism for 'Change data only' to be provided to ODI, if you want to handle deletes in your source table CDC is usefull (otherwise you dont capture the delete with a normal LKM / IKM set up)
IKM Incremental update can be used with or without JKM's, its for integrating data into your target table, typically it will do a NOT EXISTS or a Minus when loading the integration table (I$<target_table_name>) to ensure you only get 'Changed' rows on the load into the target.
user604062 wrote:
I want to understand the role of: 'Journalizing CDC' and 'IKM - Incremental Update' and
how can i use it in my scenario?Hopefully I have explained it above, its the type of thing you really need to play around with, and throroughly review the operator logs to see what is actually going on (I think this is a very good guide to setting it up : http://soainfrastructure.blogspot.ie/2009/02/setting-up-oracle-data-integrator-odi.html)
In general What are the relations between 'Journalizing' and 'IKM'?JKM simply presents (only) changed data to ODI, it removes the need for you to decide 'how' to get the updates and removes the need for costly scans on the source table (full source to target table comparisons, scanning for updates based on last update date etc)
Should i use both of them? Or maybe it is better to deelte and insert to the target tables?Delete and insert into target is fine , but ask yourself how do you identify which rows to process, inserts and updates are generally OK , to spot a delete you need to compare the table in full, target table minus source table = deleted rows , do you want to copy the whole source table every time to perform this ? Are they in the same database ?
I want to understand what is the role of 'Journalizing CDC'?Its the ODI mechanism for configuring, starting, stopping the change data capture process in the source systems , there are different KM's for seperate technologies and a few to choose for Oracle (Triggers (Synchronous), Streams / Logminer (Asynchronous), Goldengate etc)
Can 'IKM - Incremental Update' work without 'Journalizing'?Yes of course, Without CDC your process would look something like :
Source target ----< LKM >---- Collection table (C$) ----<IKM>---- Integration table (I$) -----< IKM >---- Target table
With CDC your process looks like :
Source Journal (J$ table with JV$ view) ----< LKM >---- Collection table (C$) ----<IKM>---- Integration table (I$) -----< IKM >---- Target table
as you can see its the same process after the source table (there is an option in the interface to enable the J$ source , the IKM step changes with CDC as you can use 'Synchronise Journal Deletes'
Does 'Journalizing' need to have PK on the tables?Yes - at least a logical PK in the datastore, see my reply at the top for reasons why (Log Groups, joining back the J$ table to the source table etc)
What should i do if i can't put PK (there can be multiple identical rows)? Either talk to the source system people about adding one, or be prepared to change the JKM (and maybe LKM, IKM's) , you can try putting all columns in the PK in ODI. Ask yourself this , if you have 10 identical rows in your source and target tables, and one row gets updated - how can you identify which row in the target table to update ?
>
Thanks in advance YaelA lot to take in, as I advised I would reccomend you get a little test area set up and also read the Oracle database documentation on CDC as it covers a lot of the theory that ODI is simply implementing.
Hope this helps!
Alastair

What are the differences between inactive and active ABAP objects?

Can anybody tell me what are the differences between inactive and active ABAP objects?
In my opinion, an active object is compiled and system wide available, that means the system do not have to compile the program again before run or use the object. While An inactive object is not system wide available and every time you run an inactive object, firstly the abap runtime will have to generate a tempory runtime object and this inactive object can not seen by others.
Am I right? Can anybody kindly tell me other differences?

Hi,
"When it is inactive, it is like it would not exist at all:" no - it's like it only exists to you
"If we just saved that one means it is stored in application server not in database": no - the inactive version is also stored in the database. You can log off and log on and it will still be there, in its inactive status.
"Only active objects can be executed.": no - inactive objects can be executed by you
When you create or modify a program, it is inactive until you activate it.
With a change, there are two versions of the program stored in the database - the active version (as it was before you made your change), and the inactive version. If you attempt to run the program, you'll run the inactive version - the one with your changes. Everyone else on the system will run the active version.
In this way, you can make changes without affecting anyone else.
Once you activate your program, then the inactive version becomes the active version.
With a create, there is no active version, until you hit the activate button. This means ONLY you can run the program.
An additional benefit of this model, is that if you make a change, save it, and then change your mind without activating, you can recover the active version into the editor, using version management.
A downside is that sometimes you have to activate your change before you can test it, if it interacts with other, active, programs.
Regards,
Kumar

What are the differences between StreamConnection and SocketConnection?

hi guys.
i desperately needs some explanation. i have google and the results are nt useful
What are the differences between StreamConnection and SocketConnection?
i have a j2se server using a serverconnection.
the articles on the web are contradictory as a result i am really confuse and dont know which one i should use in creating the socket connection in my j2me midlet
PLS Pls help me .

hi, a socketConnection is a subclass of StreamConnection. In other word, a StreamConnection is an interface (template) to improve more specific connection like : FileConnection, HttpConnection, ...
If you have to connect a specific server, use SocketConnection, if it's a HTTP server use HttpConnection ...

What are the basic knowledge needed for swift coding?

can someone please tell me what are the basic coding languages needed for swift coding .
Like do we need to know c or c++ ??
Thanks

Although C is the default language of Unix, Swift does not require that you know C in order to learn or program in Swift. But knowing a programming language is a helpful step in learning a new programming language.
If you read the manual's first couple of chapters you will see what the goal of designing the Swift language was. In the manual they even suggest you can learn Swift without knowing C. They have removed the indirection of the C reliance on pointers and other arcane methods in order to make Swift easier and quicker to learn.
If you have no programming experience then I would suggest you might start with BASIC or Pascal. When you are comfortable with programming then you can take on Swift.

Last week what are the new indexes created in my database

last week what are the new indexes created in my database.How can I know?
Thanks

Please try this:
SELECT t.name AS TableName ,
ind.name AS IndexName ,
col.name AS ColumnName ,
STATS_DATE(t.object_id, ind.index_id) AS IndexCreationDate
FROM sys.indexes ind
INNER JOIN sys.index_columns ic ON ind.object_id = ic.object_id
AND ind.index_id = ic.index_id
INNER JOIN sys.columns col ON ic.object_id = col.object_id
AND ic.column_id = col.column_id
INNER JOIN sys.tables t ON ind.object_id = t.object_id
WHERE ind.is_primary_key = 0
AND ind.is_unique = 0
AND ind.is_unique_constraint = 0
AND t.is_ms_shipped = 0
AND STATS_DATE(t.object_id, ind.index_id) > ( GETDATE() - 7 ) ;
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

HT5295 What are the basics of creating and distributing Podcasts?

Similar Messages

Maybe you are looking for