HT5299 can i connect my sony smart TV via thunderbolt port for better resolution.

can i connect my sony smart TV via thunderbolt port for better resolution.

You can connect the TV via the Thunderbolt port. However if the result is "better resolution" would depend on what resolution you have now (I'm guessing you mean with the HDMI adapter?)
I'm myself connecting the Mini Mac with a Thunderbolt->VGA adapter to my TV and get full 1920x1080 resolution.
Have you checked your Display settings? Make sure mirroring is off, then check what resolutions you can get on the current connection.
Please return with some more data.

Similar Messages

  • Can I connect a device to get added LAN ports for my Airport Extreme?

    Can I connect an added device to my styetem to get added LAN ports for my Airport Extreme Router system?
    Mark Edwards

    Connect a Gigabit Ethernet switch to any of the 3 Ethenret ports on the AirPort Extreme to add as many ports as you need.
    Switches come in 5-port, 8-port, 16-port, etc versions.
    Your local computer/electronics superstore will have what you need.

  • Can we connect xbee to cfp2020 controller​s serial port for wireless communicat​ion

    hi,
        i wanna do data aqcuisition using ethernet as well as wireless technologies, for that i wanna use xbee with cpf 2020.   is it possible?
    thanks in advance

    You can do it fine..
    I am guessing the wireless modem is really a router as well. When you say wireless do you mean 3g internet or 4g internet or do you mean cable or adsl and a wireless modem router.?? It is just helpful to know what you are talking about by wireless modem or wireless internet.
    You have that plugged into ethernet over power (EOP) adapters .. that is great.
    Plugged into TV again that is fine.. although I am unclear what or how it is decoding.. is it IPTV??
    Now to your specific questions.
    Now, is it possible to
    a) connect the Time Capsule to the powerline, so it can act as an access point? When connected to this powerline (ethernet) I hope I won't loose speed to the wireless connection
    Yes, the TC needs to be bridged..
    Go to manual setup of the Airport utility.. click on the internet tab.. go to connection sharing on the bottom of that page.. select off bridge mode.. update the TC.
    Now you can plug the TC into the EOP adapter. And it will work as Wireless Access Point.. WAP or short AP.. and switch.
    Plug the TV into the TC as well.. that should all work fine.
    b) will I be able to connect my digital tv-decoder to the TC without any problems? So the TC is the decoder's "ethernet port"?
    Hope this is a bit clear, as English is not my mothertongue...
    IPTV can be complicated to setup and exactly how it works will depend on the main router.. sometimes IPTV is only delivered to a specific ethernet port.. in which case the above suggestion will not work.. you can use either internet or the TV.. not both..

  • Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv?

    Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)

    The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
    There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR.

  • How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

    How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

    Hi
    This Camera has three types of ports.
    - Analog-out
    - USB
    - I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
    And Your Camera only can send Photos via the USB-connection - NO VIDEO.
    So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
    There are no real way around this.
    Yours Bengt W

  • Can you connect a sony camcorder to a mac to edit the video

    Can I connect my Sony camcorder to my mac to get the videos on my mac and edit them?

    Yes, that is precisely what iMovie is for, but which camera, what version of iMovie do you have, and what version of OS X?

  • Although the Snow Leopard updated to 10.9.2 Maverisck, so I then installed FCPX 10.1 I can not pour 4k video on your computer because it can not see the Sony FDR Ax100e. Thing left for me to do?

    Although the Snow Leopard updated to 10.9.2 Maverisck, so Ithen installed FCPX 10.1 I can not pour 4k video on your computer because it can not see the Sony FDR Ax100e. Thing left for me to do?

    Sony has put in a position that the camera was connected with their software called PlayMemories Home . This then allows you to import movies and photos on the computer and then use them in different ways. However, when the camera is connected to the mac and I said Mass Storage USB Connected , then you execute this program I told you about two seconds later , however returns an error message that is: Connect the device to your computer or multimedia support . I do not understand .

  • How can I connect my new 11" air by thunderbolt to my DVI-D monitor?

    How can I connect my new 11" air by thunderbolt to my DVI-D monitor? I have seen mini-display to dvi-d, but am unsure that this will work with thunderbolt port?

    With a Mini Display Port to DVI adapter. Mini displayport and TB are one in the same.

  • HT202157 can we connect IPad to Apple TV via bluetooth? How

    Can we connect IPad to Apple TV via bluetooth? How

    Can you be a bit more specific about what you're trying to do.
    You must have a black AppleTV 2 or 3.  AppleTV 1 doesn't support this.
    iPad 1 doesn't support mirroring only Airplay from apps.  iPad 2/3 does support mirroring.
    Mirroring is enabled by clicking iPad home button wtice scrolling to leftmost screen, enabling Airplay and then the mirroring slider underneath.

  • Can i connect 2 external hdd using the thunderbolt to ethernet adapter

    can i connect 2 external hdd using the thunderbolt to ethernet adapter

    thanks its a wd my book world i just want to directly connect to it i dont want to use it as a network hdd anymote and if i do it will i still be able to use wifi to connect to the internet.
    it shows up the the bonjour bookmarks when its connected through my router does that mean it will work?

  • Can I connect to my microsoft network via VPN and download network files?

    Can I connect to my microsoft network via VPN and download network files to my iPad2?  If so, what app is required?

    There are several apps available from App Store but the one I use is iTeleport.
    Oops the Windows specific version is called Jaadu Remote Desktop for Windows
    Message was edited by: Joe Bailey to add Windows version

  • TA20713 Can I connect and IP Phone to the LAN port on Airport Express?

    I am having difficulty connecting my internet phone to the internet.  I have a Comcast Modem with only 1 ethernet port which is connected to the Airport Express.  We are using a secured wireless network and I do not have a way of entering a password or identifiying the network on the Internet Phone.  Will I be able to connect the phone to the LAN for Internet access or do I need something else?  Normally I would simply try this out, but we have an old Airport express as the primary wireless router and we'll need to re-work out in home network a bit to get the newer Airport closer to the phone.  I'd like to know if this is doable before we put all the effort in.  Thank you

    Tampadeb wrote:
    Can I connect my Xbox 360 to the Ethernet port on my fios box? I have a wireless connection right now but is slow and lags. For me to run an ether from the router it would have to be very very long and go the the kitchen. So I was wondering if I could get it via the Ethernet port on my box directly into my xbox
    The Ethernet port on the "fios box" (I assume you are referring to a DVR/STB) is not active.  However it's easy to use a MoCA adapter to get a direct connection if you have a working coax outlet.  Simply search "MoCA adapter" in the "Ask the Community" search box for details.  Also look here:
    http://forums.verizon.com/t5/High-Speed-Internet-DSL-and-Dial/Connecting-To-The-Internet/m-p/599649#...

  • Can't connect computers to printer (b210) via network because there are "other networks"

    I can't connect computers to printer (b210) via network because there are "other networks matching your network name".  This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

    Hi Cgold,
    If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
    However, there are other options:
    If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
    or
    Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

    I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

    can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
    Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

  • Is it possible to connect a mac book pro via thunderbolt and a dvi switchbox (multiple computers) to a thunderbolt display?

    Hi,
    I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
    If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
    -ais-swiss

    ais-swiss wrote:
    How to connect windows laptop (vga) to thunderbolt display?
    AHHH??!!!!!!  Was that your original question??   I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
    MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
    So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
    I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display.   If THAT is what you're trying to do, then NO....  You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
    I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
    I wonder why apple doesn't state this in their technical descriptions...?
    -ais-swiss
    Actually, the state that information all over the Tech Specs on the Apple Store website.
    http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
    Here are two different statements from that webpage:
    So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.

Maybe you are looking for

  • Initial load of PO - Migrate PO from R3 to SRM

    Hi all, we are implementing a SRM 5.0 (ECS) and we have to make an initial migration of po from r3 to srm. Is there a standard functionality (IDOC, BAPI, or transaction) to use for this aim? rds enzo

  • Iscsi in Solaris 5.10.1 express 3/05

    Since Solaris 10 express (5.10.1) 3/05 (start from 2/05), iscsiadm is provided as isci initiator; I have a Cisco iscsi SN5428 router, (the storage is Sun StorEdge 9980) I have some solaris 9 iscsi clients setup in our enviroment using the Cisco iscsi

  • PDF file metadata into Sharepoint List while uploading

    Hi, I have a .pdf file. It has values for title and comments in the file properties. Iam uploading it to a Sharepoint List/Library. In the metadata of List/Library  the values(Title and Comments) are not getting populated. But then for other type of

  • REPORT showing the RE contract status

    Hi All, Is there any report/table  in SAP REFX which shows the contracts status. Regards Sri

  • GWMonitor lists GWIA as state Unknown

    We've been having issues with GroupWise ever since we upgraded to Linux. Today's issue is the GWIA web interface. Whenever I try to connect to our gwia web interface directly on port 9850 it redirects me to GWMonitor. And under GWMon it lists all of