HT5299 My MacBook Pro doesn't have a mini DisplayPort

My MacBook Pro doesn't have a mini DisplayPort what can I do so that I can use my Cinema Display?

You have a Dual-link DVI port. Try Monoprice to see if they might have an adapter.
Clinton

Similar Messages

  • How come my new macbook pro doesn't have ABC Bulletin as a font?

    how come my new macbook pro does not have ABC Bulletin font?

    Because you haven't installed it.

  • Apple 20" CD connects fine to MacBook Pro 2009 via DVI to Mini displayport (adapter) but not to Radeon 5770 (either MDP ports) on MacPro 2008?! Have Eizo CG223 on DVI to 5770. Any ideas?

    Here's the setup:
    Eizo Coloredge CG223 DVI to DVI on MacPro 5770 interface (ACD works fine on this too, naturally).
    Apple Cinema Display 20" have the DVI connector. I have a Mini Displayport to DVI adapter on this, into one of the 5770's MDPs, neither of which seem to work.
    Plug the same ACD via DVI (with DVI to MDP adpater) into my MacBook Pro 2009 MDP and it works fine as a second screen.
    So what's up with the 5770 MDPs? I've seen online that the card should at least support two displays, either MDPs x2 or MDP and DVI. I've seen there may be an issue with three, not two.
    Any ideas please?
    Thanks,
    Y

    Striped down to bare inputs - monitors and keyboard/mouse. Works! Dimerising must have interfered with it. Phew!

  • Macbook pro doesn't have bluetooth?

    I can't install magic mouse on my 2013 macbook pro. I can't seem to find bluetooth.
    It doesn't have on this macbook?

    Yes. your MBP has bluetooth. Click on the Apple menu and select about this mac then system report, does it have anything under the bluetooth tab? Is bluetooth turned on in the bluetooth preference pane?
    Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    See if anything on this page helps http://www.apple.com/support/bluetooth/

  • HT1338 My Macbook Pro doesn't have a Audio In Port. why is this? I thought it was standard to come with such a thing.

    I recieved my Macbook Pro as a gift from my parents on Christmas in 2011.  When a friend and I tried to record ourselves using a microphone, we knew we would have to change the audio output, using my laptop.  I then realized I have no such thing.  Is there anything I can do? like do a trade of some kind or am I just stuck without thr Audio In Port?

    Joe,
    Is it a 13" Mac Book Pro?
    I have a 13" 2.26 GHz Intel Core 2 Duo Mac Book Pro.
    It has a single audio port that can function for both input and output.  In System Preferences>Sound>Input there is a drop down menu to choose to use the audio port for Input or Output.
    Alternatively, I don't see why you couldn't use a USB microphone as well.
    Matt

  • My new Macbook pro doesn't have a start-up disc?

    I just purchased a new Macbook Pro and it didn't come with an OS back-up disc. What if I have a problem and need to re-install everything?
    How do I obtain a disc if I want one?
    Thanks,

    Then you do the following:
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    If you wish to reinstall without erasing the drive first:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • HT3205 My MacBook pro doesn't have any power. The charger light is green and the little lights along the side are green for a few seconds then fade.  Any advice?

    Well it won't turn on despite the indicator lights all being green showing it has power!

    Troubleshooting a MacBook, MacBook Air or MacBook Pro that won't turn on

  • Canon projector doesn't recognize the macbook pro with OSX lion using Mini DisplayPort to VGA Adapter

    for some reason my MBP and my iPad do not work with a Canon LV-7390 projector in the conference room at my office.
    they work every other place but in this projector (the most important). any ideas

    Hi glraczon.support,
    It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
    Here is an article that may help you with that process:
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    Thanks,
    Matt M.

  • My Macbook Pro wont play sound through Mini DisplayPort to HDMI adapter on toshiba television anymore. The sound plays through sony or samsung television, but not toshiba television.

    I have a Macbook Pro early 2011 running on mountain lion version 10.8.2. A while back, i purchased a mini display port thru HDMI port so i could watch dvds on my toshiba television. it all worked great for a while, then the sound just stopped working. At first, I thought the mini display port connector must have broke, until I plugged it into a sony television and it worked. I also tried using it through a samsung television and it worked just fine. Why does it not work through the toshiba television anymore? The picture works fine, but the sound does not come thru the television anymore. My mac is set to play sound thru the HDMI port and it doesnt. When i switch it to built in internal speakers, the sound comes thru my mac, but when i switch it, no sound comes out. Any help would be greatly appriciated. Thank you!

    I am still waiting to receive a response from them, but i dont think they'll be much help. the television still works fine and all of the ports on the back, including both HDMI ports, work perfectly.

  • MacBook Pro restarts unexpectedly after removing mini displayport-DVI adapter

    Hi all,
    I did a clean install of Mavericks a little while back. Since then I have been noticing an issue with my Mid-2009 17" MacBook auto-restarting, and have reduced it when I remove my mini displayport-DVI adapter.
    I usually work with my macbook closed, connected to a Dell 24" external monitor connected via DVI. When removing the adapter the macbook quite often goes to the grey screen telling me that the machine must force restart. It is becoming really frustrating.
    Anyone know about this issue or found a workaround?
    Thanks in advance,
    Ben

    Hi emeidos,
    If you are having intermittent forced restarts with yoru MacBook Pro, you may find the following article helpful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/TS4636
    Regards,
    - Brenden

  • Fake Apple Macbook Pro Air VGA-Adapter for mini DisplayPort

    Hello everybody,
    in November 2009 I ordered a VGA-Adapter for my MacBook Pro at Amazon.de. I used it occasionally over the last year. But today it didn't show anything before a presentation. I went to a local Apple service provider and he said it's a fake one. I didn't see another one the last year, but he's right. I made some pictures you can see here:
    http://www.abload.de/img/img_09276ay7.jpg
    http://www.abload.de/img/img_09283len.jpg
    I'm not sure but I thought I would get an official one when I bought this. I checked my feedback at Amazon (because it's from a third party seller) and I mentioned that I was wondering why the adapter was in an official DVI for mini DisplayPort packaging. It was 10€ cheaper than the regular one. Not too much to think it's not official.
    It's way over warranty time, but I'm ****** it's not working after using it only 10 times over the year (just for presentations). What can I do after buying a fake one? Go back to the seller or not?

    Going back to the seller would be your only recourse, although Amazon might be able to assist if the seller advertised the adapter as a genuine Apple part and sold you a fake instead. After this much time, though, there's probably nothing Amazon can do, and it's doubtful the seller will do anything either since the adapter apparently worked without problem for over a year. Even if the part were genuine Apple it would be out of any warranty at this point.
    Time to just buy a new adapter, it would seem, if you haven't already.
    Regards.

  • External monitor loses signal to macbook pro through DVI cable and Mini DisplayPort Adapter

    Hello,
    So I had my external monitor connected to my MBP with a DVI cable and a Mini DisplayPort Adapter, for a while already. But sometimes, the monitor would lose signal from the laptop and gives me a white noise screen. Now, the monitor can't receive signal at all, even after I got a new Mini Displayport Adapter. When the monitor and the MBP is connected by the cable and the adapter, the monitor would say "no signal" and the MBP screen would flicker (I think it's trying to connect to the monitor, but can't). The new Mini Display Port Adapter also makes the screen flicker, so I'm not sure if it's the problem is at the adapter or the DVI cable. I'm pretty sure it's not the monitor.
    What do you think? Have you ever have a screen flickering problem when your MBP is connected to an external monitor?

    I have had the same problem.  By following your suggestions I got to arrangements.  I could not send them off to the side.  When I hit the mirro disply key everyting worked.  I got it solved by clicking in arrangements and setting displays to mirror display.
    I am still have a problem of no sound coming through my tv.
    Rolland

  • MacBook Pro 13 inch mid 2012 Mini DisplayPort VGA Not Working

    I am using a 3rd party adapter that has worked a couple of times but now when I try to use it my computer freezes up until I unplug the adapter. My 3rd party DVI adapter works fine and the VGA adapter works with my windows 8 partition (used it tonight  for my presentation, how sad, bought a Mac and had to use windows still). 
    I have ML 10.8.2
    Please help, I need this to run my presentations

    I've seen a number of posts here recently about Thunderbolt/Mini Display Port to VGA adapters not working. It just seems as if Mountain Lion doesn't function well with VGA any longer. The only thing that I can suggest is to continue to use the DVI port if it works.
    Clinton

  • Can late 2008 MacBook Pro play audio though the Mini DisplayPort?

    I've got a Mini DisplayPort on my late 2008 MBP and I've got an MDP to HDMI adapotor that's meant to be audio ready.  I can't get it working with audio (ok with display) and HDMI isn't in the sound output menu.

    Yes, unless you buy one of the combination adapters I linked in this post last night, or a similar one:
    https://discussions.apple.com/message/17521569#17521569

  • My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?

    My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?  Thanks  Eamonn

    Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail.  I get the error message "disk0s2: media is not present".  Following this I inserted the installation disc and from there ran disc utility.  The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
    I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
    Any ideas of what could be causing this or the best solution?  I fear I am fast running out of options.

Maybe you are looking for