HT5299 Thunderbolt display on Mac Pro!

How can i use my Thunderbolt Display on my Mac Pro??!! please help

No, The problem is I bought my Mac Pro:
Two 2.66GHz 6-Core Intel Xeon “Westmere” (12 cores)
16GB (8x2GB) 2TB 7200-rpm Serial ATA 3Gb/s hard drive 1TB 7200-rpm Serial ATA 3Gb/s hard drive ATI Radeon HD 5870 1GB
with the Thunderbolt Display not the normal one, and i couldn't work with it, so I am asking if there is a way to make it work by an external cable or something ... i don't know!!!  

Similar Messages

  • 27" Thunderbolt Display on Mac Pro

    I have a Mac Pro (late 2010) with two 27" Apple Cinema Displays,  I would like to replace one of them with a new 27" Thunderbolt Display just because of the HD iSight camera.  Is it possible to connect it to my current Mac Pro?  I don't care about the Thunderbolt at all.

    No.  Unfrotunately I was in the same boat with a late 2010 MacBook Air.  I went ahead and took the hit getting a 2011 MacBook Air and sold my previous one to a friend at a discount.
    With a 2011 MacBook Pro (w/ Thunder bolt) you woudl be able to place the Thunderbolt display first in the chain and then the second cinema display on the end.  The thunderbolt display will have all the expansion ports (firewire, usb, etc. available).
    Note -- you may have issues though using Bootcamp with thunderbolt as currently there is no way to use the iMac 27" thunderbolt as a target monitor even with the late model MacBooks which have thunderbolt.  I feel it's plausible they will address this with better thunderbold windows drivers however.
    If you are interested on getting rid of one of your Cinema Displays I may take you on it just because of the Bootcamp issue which works fine with that one.  Let me know.

  • Use the new iMac as a display for Mac Pro

    The goal is a simple one; use the newest model iMac 27inch as a display for the newest model Mac Pro (desktop tower). The latest Mac Pro has DVI and DisplayPort out and the iMac obviously has thunderbolt, usb, and firewire. I've discovered that there isn't really a way to get thunderbolt on the Mac Pro unless someone knows something I don't. If it's the case that thunderbolt can't be added to the current Mac Pro (be it by a new video card, or otherwise), I'm wondering if I could use a DVI to USB adapter to display it on the iMac.
    I guess the takeaway here is that I don't need a virtual solution. Primarily, I use screen sharing via gigabit ethernet to access it. However, when you need a physical hardware monitor (let's say when you restart your machine or need to boot outside of OS X), you can't use the virtual options. I need to be able to use it independantly, like a traditional monitor setup. Any thoughts?

    No that will not work. The iMac will not accept video in on using USB, or anything except Thunderbolt.
    Best of luck.

  • Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

    Can I use 27' iMac(Later 2009) as a display for Mac Pro(future 2013)?

    See > http://support.apple.com/kb/PH11302
    To be able to use the iMac as an external display, the Mac Pro should come with a Mini DisplayPort or Thunderbolt port, so think that it will include Mini DisplayPort or Thunderbolt, although we don't know anything.
    To connect the iMac to the Mac Pro, as your iMac has got a Mini DisplayPort, you have to use a Mini DisplayPort to Mini DisplayPort cable (Thunderbolt is compatible with Mini DisplayPort cables, but Mini DisplayPort isn't compatible with Thunderbolt cables). Then, just follow the steps of the page above to use the iMac as an external display

  • Can i use Apple 2005 20-inche cinema display on Mac pro ?

    can i use Apple 2005 20-inche cinema display on Mac pro ?

    If the display has a DVI connector it will plug into the Mac Pro directly.  If it uses ADC (Apple Display Connector)
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    you will need a DVI to ADC adapter
    <http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

  • Sound Switches Between Thunderbolt Display and MacBook Pro

    I have an Apple Thunderbolt display and MacBook Pro set-up with dual screens. I have an iPhone plugged into a dock that runs to the display. When I have music playing out of the display and I disconnect my iPhone, it switches the sound to the MacBook Pro.
    1. How do I stop this from happening?
    2. If I can't stop it from happening, how do I move the sound from the MacBook Pro back to the display?
    There doesn't seem to be any options within Preferences/Sound to change it back.
    Thank you.

    I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
    I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
    Clinton

  • Are there PCI thunderbolt cards for mac pro 3.1?

    are there PCI thunderbolt cards for mac pro 3.1?

    DCWinton wrote:
    Rick
    It's that last sentence I'm curious about.  "However a MacPro already has much more capability already built in than Thunderbolt can add."
    I'm thinking of getting a Mac Pro, but see that it doesn't seem to have Thunderbolt. I'm not sure if I care. The reason for the Mac Pro is that I'm topping out my 8gb RAM 27" iMac capacity with the volume of work going through it, and my tech tells me I'm pushing it too hard.  I use it to run a small law office, but usually have about 15 apps open, with lots going on in the network in the background.
    Is there any reason to wait until Apple puts Thunderbolt into the Mac Pro?
    Thunderbolt will not increase the performance capability of the MacPro. It will add a bus that can be convenient, especially later on when Thunderbolt devices become more common, more mature and better supported - oh, and with more common will come less costly. From a pure performance standpoint the existing PCIe slots are much more capable and cheaper to implement. You would be giving up nothing with a current MacPro.
    My opinion. Thunderbolt is really a great move forward in the long run - needed something to replace Firewire and this is it. But there is no reason to wait on Thunderbolt on MacPro - it is redundant.
    Rick

  • New cinema display on Mac Pro monitor keeps turning off/going dark. Support told me a keyboard shortcut (something like option R L)... I'd appreciate it if anyone knows it. I had this problem when i 1st bought it 2 months ago.

    My new cinema display fro mac pro just went dark. When I 1st bought it, the display wouldn't turn on.I called support and they gave me a keyboard shortcut - something like Option+R+L - that you held down for 2 restart cycles. Then it magically turned on. I can't remember the sequence and I'm afraid to guess! I'd appreciate if anyone knows the trick. I'm also wondering if I should bring this display back...

    Cassandra from Apple Support ROCKS!!!! She's a supervisor somewhere and should have a raise. Pleasant, smart and professional with a customer who wouldn't take "I don't know" for an answer.
    If your cinema display goes dark:
    1. shut down computer
    2. restart
    3. immediately hold down Command-Option-P-R keys simultaneously for a few minutes (seems forever)
    4. keep holding keys for 2 startup cycles
    5. release and go back to work if you're lucky to have a restored screen

  • CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

    Hello,
    i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
    May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

    Hi there ulairi9!
    I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
    AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
    http://support.apple.com/kb/TS3271
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Using 27in iMac as display for Mac Pro (both latest models)

    I'm in need of using my new 27in iMac (current 2012 model) as the display for my current 2012 Mac Pro. As you probably know, the mac pro has 1 DVI port, 2 mini display port, and some firewire ports. The iMac has 1 firewire port and 2 thunderbolt ports. Both units have USB 2.0 obviously. I found that the new iMac doesn't support target disk mode with non-thunderbolt machines so that won't work. I wonder if there is a way to use these other connections to enable my mac pro to display on the imac. Any suggestions?
    (My latest wonder is if I can upgrade the video card in the mac pro with a card that has thunderbolt outputs?) 

    That is a subtle distinction, but I think you are right.
    Use an iMac with Thunderbolt as a display
    If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
    Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
    Make sure both Mac computers are turned on and awake.
    Press Command (⌘)-F2 on the keyboard of the external display Mac.
    If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.

  • Hi - How do I connect an HDTV as a second monitor to Thunderbolt display with macbook pro in clamshell mode?

    I have a Late 2011 Macbook Pro in clamshell mode connected to a Thunderbolt Display with the built in Thunderbolt cable. I want to then connect an HDTV via the Thunderbolt port at the back of the Thunderbolt display. I already had a  cable that I thought would work which turns out to be a MiniDisplay port to HDMI cable and therefore not compatible with Thunderbolt to Thunderbolt (Mini DisplayPort not being the same technology although it uses the same port - although I'm not an expert !!) So far a web search has provided me with the only solution being using a Thunderbolt dock or storage that has multiple Thunderbolt ports and then  using that to daisychain inbetween the Thunderbolt Diplay and the HDTV. The cheapest solution I can find for this would be about £250. Surely not ??!!!!
    Many thanks for any comments - Nik

    You could also use aThunderbolt dock with HDMI, such as:
    <http://www.belkin.com/uk/F4U055-Belkin/p/P-F4U055/>
    <http://www.caldigit.com/thunderboltstation/>
    <http://www.elgato.com/en/thunderbolt/thunderbolt-dock>

  • How to connect the 27" cinema display to Mac Pro?

    Hallo, I want to connect my mac pro, early 2008, with force gtx 285 to a apple cinema display 27", which adapter do I need??? Sorry for my english, I'm from austria. Thanks for your help :-)

    To drive the 27" to its full reolution you need a male dual link DVI to female mini-displayport adaptor.  Apple makes one but it is not cheap ($99).  Stick "dual link dvi to mini-displayport adaptor" into a google search and maybe you can find something cheaper.

  • How to connect 3x mini-displayport cinema displays to Mac pro

    I'm looking for recommendations on how to connect 3  27" Apple cinema displays to a new Mac Pro (single card).
    2 connect direct to the mini-displayports; but which adapter converts DVI-D to mini-displayport (not mini-displayport to DVI-D)?
    Any suggestions/recommendations with a link would be appreciated.

    In addition to the one from Atlona, there are:
    <http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
    <http://www.kanexlive.com/c247dl>

  • Using IMAC 27 (LATE 2009 ) as primary display for MAC PRO PRO 2013

    I have been a user of IMAC & Macbook but not mac PRO.
    I wish to upgrade to  MAC PRO ( 2013 ). As i want to make the transition less costly i want to use my current IMAC 27in ( LATE 2009 ) as the one and only display.
    First question . Is the above possible with MAC PRO ?
    Second question related - When using the above option eg  MAC PRO as main system and 27in IMAC as display. Will the hard drive and on the IMAC be possible to go in to sleep mode. I would be concious about power consumption and the life expentancy of the constant use of the HARD DRIVE on the IMAC.
    I would like to be able to keep the hard drive on the IMAC off or at least in sleep mode.

    Target Display Mode FAQ:
    http://support.apple.com/kb/HT3924?viewlocale=en_US

  • Two Apple Displays and Mac Pro - How To Set Up?

    Hello! My boyfriend surprised me yesterday with a second 23" Apple HD Display! Fed Ex delivered it and I had no idea it was coming! Before I take the plunge I need to know how to set it up so it works as with my current Mac Pro and 23" display so that they work together, as one big screen. I have the ATi X1900 graphics card with 512mg of RAM and two DVI ports and assume that will be sufficient to run both displays.
    Is it possible to use them as one large screen? If so, how do I set that up? If I just plug it in and restart, will the two screens work as one or as separate screens?
    Thanks!
    Lisa

    I did the same thing last night, and if you haven't just plugged it in already, it's really as simple as that.
    I get a little video glitch on my main startup screen when I'm booting up, but otherwise it just works smoothly. Plug it in, and go.

Maybe you are looking for

  • Photoshop CC 2014 free trial will not install on Win8

    I am trying to install but get this - mind you, I'm not familiar with 99% of the terms used in this error message, so please, I kindly ask, explain what I need to do in simplistic terms.  I don't know what the error message means.  Thank you for your

  • Firefox scroll-down button out of view

    Good evening, I've been so used to using my trackpad to scroll down when i'm on the internet that today when I looked at the bottom right corner of my browser, I was surprised to find that my scroll-down button was missing. I don't think it's really

  • Help with dumping to DV and losing audio

    I'm using FCP5 and I'm trying to dump my video to DV so I can show it soon. When I play back the DV tape there is no audio. I've tried 2 cams and it's not that, so somehow I've messed up a setting that sends the right audio to the DV. Can someone pls

  • BAPI or FM for Invoice made for sales order...

    Hi Experts, Is there any BAPI / FM for Invoices made for sales order for the month or date wise, party wise, etc. I want to make a report invoices made during the given period for sales order. Yusuf.

  • Cancellation of return delivery

    Hi all, I want to know, if we cancel the Return delivery document after doing Reverse goods Movement using VL09, then wht will happen to the stock. will it go away or come into the stock. plz. let me know. thanx in advance sourav