HT5312 How do i find out what my security questions are if i forget them??

how do i find out my security questions if i dot remember them without contacting the support??

If you didn't previously set up a rescue email address, you can't do that on your own.
(95306)

Similar Messages

  • HT5312 How do I find out what my security questions answers were I have forgotten

    How do I find the answers to my security questions , I forgot the answers

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get the questions reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use, or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • How do I find out what my security question are ?

    I've tried to down load an I tune and they are asking me to answer two questions fav job fav football team I answerd the questions then it came back as wrong answers so can you pleas tell me how I can sort this ??

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • How do I find out what my security questions are?

    I have tried using a different email and have followed the directions but they keep bringing me back to where I started, I just want to be able to purchase things again!

    It happened to me to, I had to call Apple support...based on your need choose the topic from there
    https://www.apple.com/support/

  • HT201303 How can I find out what my security answers are? I am trying to purchase an app on a new device and it won't let me without answering and I have totally forgotten

    How can I find out what my security answers are? I am trying to purchase an app on a new device and it won't let me without answering and I have totally forgotten

    Welcome to the Apple Community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.

  • How do I find out what my security questions and answers are?

    I am trying to buy music but the directions are asking me for 2 security answers for 2 security questions to which I don't remember listing at the sign up process.  I gave an aswere of what i thought and it said "Incorrect".  I just want to know where to go and retrieve my questions and answers so I can list them and be done with the buying process.  Can someone tell me where I would find that information?

    Go here & click on "Manage My Account":
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    If that doesn't work/help:
    Go here:
    https://expresslane.apple.com/Issues.action
    Ask for assistance.

  • How do i find out whats my security code ?

    how do i find out whats my security code?

    are you talking about the passcode to unlock the phone? if you forgot it there is no way to recover it, you'll have to restore the phone on the same computer you usually sync it with.

  • How do I find out what the price thresholds are before royalties are paid to the author?

    How do I find out what the price thresholds are before royalties are paid to the author?

    If you sign in to iTunesConnect and look through the Contact Us questions, one of them says:
    "Payments are made within 45 days of calendar month end if both of the following conditions are met:
    All documentation is complete, including any required banking and tax information.
    The payment threshold of USD $150 has been exceeded.
    If you have not received a payment for a given month within 45 days after the end of the month, please confirm that all documentation has been completed and provided. Also, please confirm that the cumulative amount owed exceeds USD $150 by converting reported amounts using current exchange rates."
    I should say though I seem to get paid without reaching this threshold.

  • TS2446 Is there a way to find out what your security question answer is?

    Is there a way to find out what your security question answer is?

    Amazing,  I can't find out what app on my phone just ran 388mb of data xfer at 2:44am yesterday while I'm sound asleep yet the LE types can subpoena and search warrant anything I do online and with who and for how long.  Verizon list who I receive phone calls from and make calls to and from where I receive messages and to whom/where I text but can't tell me squat about something that is eating up band width.  I'm sure it's probably some app that is running in the background on my phone. I've just got to figure out what it is and kill it.  I want to drop (cause I don't use it, it's slower than a dial up 1200bps modem)my data plans and save about $50 a month.

  • How do I find out what HD upgrade options are compatible with my MBP?

    I'd like to upgrade the 250GB hard drive in my Macbook Pro to a 500GB or larger size.
    A copy of the Hardware Overview is pasted below to illustrate the specifications of what I have right now.
    How do I find out what drives are compatible with my machine?
    What, if any, are the options for buying something off-the-shelf at a retail outlet?
    Hardware Overview
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          4 MB
      Memory:          4 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MBP31.0070.B07
      SMC Version (system):          1.16f11
      Serial Number (system):          W8******XAH
      Hardware UUID:          00000000-0000-1000-8000-001EC20738B2
      Sudden Motion Sensor:
      State:          Enabled
    Serial-ATA Device Tree
    Intel ICH8-M AHCI:
       Vendor:          Intel
      Product:          ICH8-M AHCI
      Link Speed:          1.5 Gigabit
      Negotiated Link Speed:          1.5 Gigabit
      Description:          AHCI Version 1.10 Supported
    FUJITSU MHY2250BH:
                    Capacity:          250.06 GB (250,059,350,016 bytes)
      Model:          FUJITSU MHY2250BH                      
      Revision:          0081000D
      Serial Number:                  K43******RL2
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
    disk0s1:
      Capacity:          209.7 MB (209,715,200 bytes)
      BSD Name:          disk0s1
      Content:          EFI
    Macintosh HD:
      Capacity:          249.2 GB (249,199,591,424 bytes)
      Available:          82.45 GB (82,445,946,880 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
      Content:          Apple_HFS
    Recovery HD:
      Capacity:          650 MB (650,002,432 bytes)
      BSD Name:          disk0s3
      Content:          Apple_Boot
    <Serial Number Edited by Host>

    I got the hard drive upgrade kit and now have the old drive in the On-The-Go-Pro external enclosure and the new drive in the Macbook Pro. I booted from the old drive and now I'm ready to restore to the new drive using Disk Utility but I'm not sure exactly what to select as the Source and Destination.
    Three disks are listed in the left frame. The new Samsung disk, the old drive in the OTGPro external enclosure with a volume called "Macintosh HD" and something called "disk 2" with a volume of Mac OS X Base System under it.
    I think I should select "Macintosh HD" as the source and the Samsung Drive as the destination. But I'm not certain.
    What's the correct source and destination?

  • Changing Domain Administrator Password : How can I find out what all servers / services are currently using this?

    Good morning all,
    I took over as IT director for the school district in my town about 2 years ago, and we've had some techs come and go, all of which have had the domain administrator password (not my call, but my fault for not changing it by now).  I am about to change
    it, but before doing so I want to know how I can make sure what all this will break so I can quickly change the cached/saved password on whatever supporting services use this user/pass.
    Can anyone help here?
    Thank you!

    Hello,
    In my point of view if I were in this situation I would Change the domain administrator password. By
    Resetting the domain administrators all the services which use domain administrator as their logon user, will lose their functionality. I had this experience and I did change the domain administrator password with no problem. However do not
    forget to have a account lockout tool or script for locating the place where the account was locked out.
    But to keep it short most of the time. lockout problems are arise from mapped drives, credential manager and saved RDP sessions and etc.
    Regards.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • How do I find out what Quicktime part numbers are?

    I recently found some old emails from when I purchased Quicktime Pro. They do not show what versions they are for and I'd like to find out. All the give me is the part number, product name and my product key. All the product name says is "QuickTime Pro for Windows". I've got 2 messages with 2 different part numbers. They are:
    Part Number: D1585LL/A and
    Part Number: D2092Z/A
    Can someone tell me what versions of Quicktime Pro these part numbers are for? Even though they're older versions I'd still like to know since I paid for them.
    Any help would be appreciated.

    If it helps, the emails are dated 03/2002 and 08/2003.
    That does help ... the current version of QuickTime in 2002 was either 5.x or 6.x, and in 2003 the current version of QuickTime is 6.x (we don't get 7.x until 2005):
    http://en.wikipedia.org/wiki/QuickTimeversionhistory#History
    So I'm afraid those keys aren't going to work for a 7.x.

  • How do i find out my itunes security questions?

    i have not been able to anwser my questions and idk how to figure them out

    1. See my User Tip for some help: Some Solutions for Resetting
        Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for
            support and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions
    5. For online assistance use Apple - Support - Express Lane

  • How can you find out what number comment you are on within the comments list?

    Hi everyone,
    I have looked around but I cannot seem to find an answer to what seems a very simple request.
    I have a PDF with over a hundred comments on it and I am making (slow) progress through the comments list. I would like to estimate how long this job will take me to complete by looking at the time I have spent on the job and a which comment number I am at (e.g. I am currently at comment 60 of 120 - half way through).
    I cannot seem to find a way to do this without manually counting the number of comments I have been through already - which seems a watse of my time.
    Is there an easy way to do this? I am sure I am missing something simple here.
    Thanks in advance,
    twordz

    Sorry, I guess I mis-spoke. I thought that it will be numbered sequentially
    for the entire document, but I guess it's per page.
    The problem with numbering comments is that their internal order does not
    necessarily correspond to their physical location in the file. The internal
    order is based on the order in which they were created. Having said that,
    it is possible to generate a summary of the comments with sequential
    numbers for the entire file (not just page by page), but it would require a
    custom-made script.

  • How can I find out what extensions (not plugins) are currently installed using JavaScript?

    I am creating a JavaScript module which detects if a Firefox extension is installed in the client's browser.
    I can check if a Firefox plugin is installed by querying navigator.plugins object, but I can't figure out how to do this for extensions.

    You can't check for extensions that are installed.<br />
    Plugins can be detected via navigator.plugins as you posted, but you can't detect extensions for privacy and security reasons.
    *https://developer.mozilla.org/en/docs/DOM/window.navigator
    It the past it was possible to check for images added by an extension, but that access was blocked.
    * http://blog.mozilla.com/security/2007/11/16/jar-protocol-xss-security-issues/
    * http://blog.mozilla.com/security/2008/01/22/chrome-protocol-directory-traversal/
    * http://blog.mozilla.com/security/2008/01/29/status-update-for-chrome-protocol-directory-traversal-issue/

Maybe you are looking for