HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Similar Messages

  • HELP!! i need help with the security question reset

    i clicked send reset to ********@me.com but @me.com doesnt work anymore so how do i change my email for the security questions!?!?!

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

    I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

    Click here and ask the iTunes Store staff for assistance.
    (114040)

  • I purchased my macbook pro on the 18th of june 2011, do i still need to purchase the lion or is there a way of getting it from mac complimentry ?

    I purchased my macbook pro on the 18th of june 2011, do i still need to purchase the lion or is there a way of getting it from mac complimentry ?

    OS X Lion - Get up to date

  • HT5312 I need help resetting my security questions so I can shop from the apple store.

    I can't answer the security questions because I never set them up. I need to download n buy a game for my daughter.

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (104628)

  • I need to change the security questions but there is no option in the "password and security" option to reset them .......what should i do ???

    i need to change my security questions because i forgot the answers to them ...... plus in the "password and security" option in the "manage account" department where the questions are asked , there is no option to reset the questions so how do i do it ????

    See Kappy's previous write-up.
      Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • I need help with the Security Update 2006-002!

    Security update has really screwed up the two systems I've installed it on:
    1) My G4 PowerBook refused to reboot after the update, getting only as far as the initialApple screen. Rebooting with a 10.4 install disk and using Disk Utilities to try to repair the disk either results in an "Unable to unmount disk" error, or if Repair does proceed, it is unable to repair the disk. I get a "Invalid node structure" error message, then a "Rebuilding B-Tree" message, then a "The Voluma Macintosh HD could not be repaird" message, and Repair quits with a "Error: the underlying task reported failure on exit" message.
    2) On my Dual 2 GHz G5 desktop, Safari appears to be unable to load more than six URL:s in 6 tabs; I read about 20 webcomics all organized in a bookmarks folder, and my usual practice is to select "Open in tabs" to open them all at once. Heretofore Safari has opened all the tabs and all the URLs without a hitch. After the update it will open all the ttabs but only about the first six sites load - all the rest just sit there spinning their wheels.
    Also it has hosed iChat on my Dsktop. iChat will open, but will not send or receive chats, and will not open the buddy window.
    Also Also, the system frequently hangs, seizing up anywhere from 30 seconds to a few minutes, then resuming normally. Safari seems to be the culprit, but I can't really tell.
    I need an update to recover from the effects of the last update.

    I'm not very knowledgeable on macs yet being a new user (switcher) However, there appear to have been too many problems for too many people and too many systems associated with this update for it to be co-incidental. Take a look through the topics since the update appeared. My computer is brand new. The update did something that screwed something in the startup file (or whatever) The nice man in India helped me get the computer going by removing all sorts of wonderous things, this after his colleague in Cork had sent me all sorts of stuff to my work address to try out when I got home, like pram and nvram (which only made things worse) and other things. Now my computers fixed. Except that there's now no printer, it won't find the drivers off the install discs and any driver I load from canon isn't recognised or a script isn't recognised. I bought this thing to get away from problems like this on PCs!!!!
    iMac Intel 20"   Mac OS X (10.4.4)  

  • I need help with my security questions/answer?

    I forgot my security questions answer

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'. Please be patient waiting for the return
              phone call. It will come in time depending on how heavily the servers are being hit.
         2.  Call Apple Support in your country: Customer Service: Contacting Apple for support or
              Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
              Account Security.
         3.  Rescue email address and how to reset Apple ID security questions.
    How to Manage your Apple ID: Manage My Apple ID

  • HT5312 i Need Help To Change Security Questions

    I forgot the answer
    And I need to know the answer or change the answer
    Thank you
    And the best that you send to my  Emil  or put  link

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • Need help with the classic question: iMac or MacPro?

    HI all,
    I have been tossing this questions for a little while now, high end iMac or low end MacPro? So if I can request your patience, please allow me to rattle this lot off and see if you can help.
    My current spec is:
    • MacPro 1,1
    • 2 x 2.66 Dual Core Xeon
    • I have 2 screens, 24"
    • All 4 internal bays have HDs, 1 is designated for TimeMachine.
    • 2 external HDs, 1 for iTunes and misc, 1 for boot HD backup.
    The software I run are mostly the Adobe CS suites, some 3d, some audio, and soon some FCPX.
    I have had the computer for about 4 years now, and although it has served me very well it is getting tired etc. I am a long-term tower computer fan, but I can't ignore the question.
    So, I have been thinking of either:
    • Going for the high-end iMac, and consolidate much of my internal HDs into an external RAID system.
    or
    • Getting the low-end MacPro, with the 3.2ghz Nehalem chip upgrade, and basically keep the same 'style' of system I have now.
    The
    What would you recommend? My concern is of course related to price, and bang for the buck, but more than that - longevity for the upcoming years. Pretty much now is the time when I will be updating, and I expect to keep whatever system for the next few years.
    I don't see my uses for the Mac to be too much different from what is listed above. I have not installed anything other than additional HDs and RAM into my current Mac - so in that respect expandability isn't too much of an issue.
    The price is similar enough to be comparable.
    In case you wonder, the current MacPro has been earmarked for use in another task, which is likely to include usage of the screens... Hence in somerespects, this is a "starting from scratch" situation...
    Thoughts?
    Many thanks,
    Aaron

    Forgot to mention Aperture. Lot's of photos.

  • I forget my answer on security question is there any way to get it?please need ur help ..i try to resend to my mail but no mails coming

    thanks

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
    (96810)

  • Need help with a calculated column - is there any way to reference a value in the current row?

    Hey guys,
    I'm a bit of a DAX newbie, and I'm running into a block. I'm creating a Power View report about IT tickets. We are going to be creating a cube to automate the data soon, I'm currently working with a flat Excel Data Table of data to demonstrate the Power
    View reporting capabilities to the team. I need the default display to show the top 4-5 items basked on the Ticket Count. The three applicable columns I'm using are the TicketID, the ContactReason, and the AssetCategory - all three are
    text. One slide will show the top five Contact Reasons by Ticket Count, and the other will show the top five Categories by Ticket Count. The users will see this default view, but will be able to change it to see differently ranked items or can clear the
    ranking slicer altogether.
    What I've accomplished so far is to create the Calculated Field [Ticket Count] = COUNTA(Table1[TicketID])
    And 2 other calculated fields:
    [Contact Rank] = RANKX(ALL(Table1[ContactReason]),[Ticket Count],,,DENSE)
    [Asset Rank] = RANKX(ALL(Table1[AssetCategory]),[Ticket Count],,,DENSE)
    If I were creating a Pivot Table, this would be great. These fields calculate everything the right way. The problem is, I need to have a Rank slicer on each slide and the calculation by itself contains no data - with no data, there's nothing to slice. I
    realized I need to actually have columns of data so I can create a slicer. I need each row of the table to show the same [Contact Rank] for every instance of a particular ContactReason (and the same for the [Asset Rank] and AssetCategory).
    The RANKX formulas pasted into the Calculated Column section only show a value of 1 - with no Pivot table summarizing the fields, it's counting each row's ticket once, giving every line the tied Rank of #1.
    I've solved the problem in Excel by creating 2 Pivot Tables on a separate sheet that have the data field and the calculated field for ContactRason and AssetCategory. Then on my Excel Data Table, I've added two columns that do a VLOOKUP and pull over a the
    Calculated Rank from each Pivot Table that match the ContactReason and AssetCategory fields. This works on the flat Excel Data Table now, but will not be a solutions when we start pulling the data from the cube (and there is no flat table).
    What I think I need is an Expression for the RANKX formula that can give me, for each row, the count of all of the times a ContactReason shows up in an entire column. There's only about 100,000 lines of data and each ContactReason or AssetCategory
    may show up several thousand times. But if I can get the expression to return that count, then the RANKX formula should work in the Column. If it wasn't a DAX formula, I'd use a COUNTIF and say 'Count the entire ContactReason column anytime it's equal to the
    ContactReason on THIS row', but in DAX I don't know how to reference a single value in a row. I've tried the CALCULATE() formula, but it seems like the filter needs a specific value, and doesn't work on a dynamic "cell" value.
    Any help would be greatly appreciated! (I hope it all makes sense!)

    If I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
    =
    RANKX(
    ALL(Table1),
    CALCULATE(
    COUNTROWS(table1),
    ALLEXCEPT(Table1, Table1[ContactReason])
    DENSE
    If this has missed the mark, would it be possible to clarify the requirement further?
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com
    Blog: http://www.nimblelearn.com/blog
    Twitter: @nimblelearn

  • Updated my iPhone4 last night. I need help with the cloud and texts. I'm not getting text.  Thx

    I updated the phone, and now I can't get texts. All our info is merged-- and other phones are getting my messages.  I'm not sure where I need to go to turn off or on the right info on cloud and also with messaging.
    Thanks.

    Check settings>iCloud, settings>messages and settings>FaceTime. Don't use the same apple id in all devices.

  • I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

    The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set

    I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set, so i can also not buy apps without entering my question awnsers please help

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

Maybe you are looking for

  • Confimation

    Dear folks, We have created confirmation for NWA's in last period but that only posted actual hours and didnt post actual cost. Now we are trying to fix that issue in COFC but I am getting posting period is not open(This is normal since previous peri

  • Web services and basic auth

    Hi, I'm trying to set up a web service that should use basic authentication as security solution. I've used the admin console to define security policies and left the 'Check roles and Policies for' in 'Web applications and EJBs protected in DD' for m

  • I am getting an invalid certificate notice when going to one web site only, that formerly was not a problem. Happens with Safari and Google Chrome. Any ideas?

    I am getting an invalid certificate notice when going to only one web site, that previously was OK. Happens with both Safari and Google Chrome. Would emptying the system cache fix the problem?

  • Problems with OVI Suite, in under 24 hours...

    I recently upgraded my Nokia software to OVI 2, or whatever its called. I will admit, it does look a bit better than the previous version, seems a bit nicer to use, and I like the fact that music, syncing and updating, is all now done from the same a

  • HDCP problems after firmware and thunderbolt update

    I just finished installing the recent Macbook Pro EFI Firmware update (version 2.2) as well as the recent Thunderbolt Software Update (version 1.0). I am now unable to play an HD movie that I purchased through iTunes on the screen of my Macbook Pro.