HT5361 Can I use send and delivery receipts when composing mail?
Does anyone know if I can ask for read receipts and delivery receipts when composing mail?
Additionally (to BobtheFisherman):
And his suggested method will work just as well as any send/read receipt since many recipients will not allow such a receipt be sent. If it is important enough to require a receipt, send it via USPS return receipt requested, or FedEx, etc.
Similar Messages
-
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.
-
Device sends READ and DELIVERY receipts when not programmed to do so.
My Blackberry Curve sends read and delivery receipts to the email sender and to my email. Many times I don't even open the message. In my BB email options, I have NO marked on confirm delivery, confirm read and send read receipts. Does anyone know how to make these stop sending?
sounds this resource is protected by basic authentication??
workaround is to retrieve (for designtime) the wsdl from a browser and save it locally .. and create the plnk on top of it .. during runtime
you need to specify properties on the plnk binding in bpel.xml
httpUsername
httpPassword
all given that your resource is indeed protected by basic authentication .. -
Can't use SecKeyRef and similar functions, when "Compile sources as" is set to "Objective c "
Hi, need to access SecKeyRef funcion and some other similar ones, but i can't access them, when my compiler option "Compile sources as" is set to "Objective c++". When it is set to "According to a file type", i dont get any errors with those funcions, but my old code starts to get errors. What should i do? I have tryed everything and still no luck...
I'm using xcode 4,6 and app is for iOS6.I got my problem fixed. I was getting errors, with some failas that were importing <cmath><limits> etc. I renamed their extensions to .mm and set compile sources as to "According to a file type".
Now wait a second. So if my apps target is iOS6.1 , apple will no longer accept my app? I didn't heard nothing about it... -
Email read and delivery receipt
Hi,
I an sending a mail from SAP to the employees outlook and the sender is the common mail box which is entered on selction screen.
Our requirement is that the common email box should recieve read and delivery receipt for the mail.
Please tell me how to do it.
I am uisng the following code to send the mail.
DATA : lt_att_content_hex TYPE solix_tab,
lv_subject TYPE so_obj_des,
lv_async TYPE c,
" lx_email TYPE type_email,
lv_email TYPE adr6-smtp_addr.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
CLASS cl_bcs DEFINITION LOAD.
DATA: lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
Message body and subject
DATA: lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
Create recipient
DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
TRY.
lo_send_request->asynchronous(
RECEIVING
result = lv_async ).
CATCH cx_send_req_bcs .
ENDTRY.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = pdf_xstring "PDF file from function module
TABLES
binary_tab = lt_att_content_hex.
CONCATENATE ': ' pn-begda+0(4) 'Benefit. Statement' INTO lv_subject
SEPARATED BY space.
DATA: lx_string TYPE string.
Message Body
APPEND ' Body' to lt_message_body.
lo_document = cl_document_bcs=>create_document( i_type = 'HTM'
i_text = lt_message_body
i_subject = lv_subject ).
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = lv_subject
i_att_content_hex = lt_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( 'XYZ@XYZ' ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Create sender
DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send TYPE adr6-smtp_addr.
l_send = p_email.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
TRY.
lo_send_request->set_status_attributes(
EXPORTING
i_requested_status = 'A'
i_status_mail = 'A' )
CATCH cx_send_req_bcs .
ENDTRY.
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The form has been emailed to the Manager' TYPE 'S'.
CLEAR lt_message_bodyHi,
For reciepts to work the basis setting needs to be activated.
SCOT->Settings->Confirmation of Receipts -
My Blackberry Curve sends read and delivery receipts to the email sender and to my email. Many times I don't even open the message. In my BB email options, I have NO marked on confirm delivery, confirm read and send read receipts. Does anyone know how to make these stop sending?
open messages icon - menu - options - email settings - make sure it shows your email beside MESSAGE SERVICE
change CONFIRM DELIVERY and CONFIRM READ and READ RECEIPTS to NO -
How can I use OmniPortlet and Web Clipping Portlet?
How can I use OmniPortlet and Web Clipping Portlet?
You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter -
How can I use excel and word on the IPAD2
How can I use excel and word documents on my Ipad 2
There are apps such as Documents To Go which support reading/editting/creating those sorts of documents :
standard version - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version - http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8 -
I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)
Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev -
How can I use undo and redo with run time menu?
Hi..I try to built my own menu for graphic programming. How can I use undo and redo in labview with run time menu?
filozof-
During runtime, by default, LabVIEW has undo/redo data changes under the edit menu. This will undo/redo changes made to controls during runtime. If you want a more extensive undo/redo (custom for your application), you are going to have to do quite a few things
1) Create a custom runtime menu (Edit>>RunTime Menu) and place your own undo/redo controls on it
2) Keep an action history in your program
3) Catch the Shortcut menu event for your custom undo/redo controls
4) Reverse the last action in your histroy when you catch the event
This method would allow you undo entire operations (like resize, move, or whatever kind of functionality you are building into your application) unstead of just undoing data changes.
Xaq -
Hi, I have already bought Adobe Photoshop and Lightroom for 1 year. Now I will change my PC to Mac. Can I use Photoshop and Lightroom in my new Mac?
Yes.
Mylenium -
I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?
No. Return it and get your money back if still within the 30 day return window. All US iPhones are carrier locked and cannot be officially unlocked.
-
Can we use overload and overwrite concept in OO-abap
hi
can we use overload and overwrite concept in OO-abapHi
CLASS zl_lcl_vehicle DEFINITION.
PUBLIC SECTION.
Signature of method
METHODS: set_make
IMPORTING value(im_make) TYPE string " Pass by value
im_model TYPE string," Pass by reference
ENDCLASS. "zl_lcl_vehicle DEFINITION
CLASS zl_lcl_vehicle IMPLEMENTATION.
Implementation of method.
METHOD set_make.
IF im_make IS NOT INITIAL
AND im_model IS NOT INITIAL.
gv_make = im_make.
gv_model = im_model.
ENDIF.
ENDMETHOD. "set_make
ENDCLASS. "zl_lcl_vehicle
Overloading means changing signature as well as implementation of a method.
Overriding is changing only implementation of method with signature unchanged.
From ABAP perspective, only the CONSTRUCTOR method can be overloaded in a subclass i.e both the signature and implementation can be adapted in subclass.
Any other method can't be overloaded. It can only be redefined/overridden i.e implementation changed with signature unchanged.
In ABAP there is something called a redefinition.
When you inherit a class from a super class, you can redifne a method. You cannot chnage the signature( Interface) of the method. It will remain the same as that of the super class.You must redefine a method in the same visibility section in which it appears in the superclass.
Eg.
CLASS C_SUPER_CLASS DEFINITION .
PUBLIC SECTION.
METHODS: DRIVE ,
STOP.
PROTECTED SECTION.
DATA SPEED TYPE I.
ENDCLASS.
CLASS C_SUPER_CLASS IMPLEMENTATION.
METHOD DRIVE.
SPEED = 0.
WRITE: / 'Bike speed =', SPEED.
ENDMETHOD.
ENDCLASS.
CLASS C_SUB_CLASS DEFINITION INHERITING FROM C_SUPER_CLASS.
PUBLIC SECTION.
METHODS DRIVE REDEFINITION.
ENDCLASS
CLASS C_SUB_CLASS IMPLEMENTATION.
METHOD DRIVE.
SPEED = SPEED + 10.
WRITE: / 'Bicycle speed =', SPEED.
ENDMETHOD.
ENDCLASS.
Regards
Vasu -
Can we use exceptions and conditions at the same time?
can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?
Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions -
Can i use safary and watch on the tv
I bought the apple tv device
from my ipad can i use safary and watch on the tvIf you want to mirror you need iPad 2 (or later)
http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US
Maybe you are looking for
-
Gui_Download....How to Output the each field in different line
Hi All, I need to create a text file that will be downloaded into the pc with the format as Personnel Number Amount Bank etc... i.e each field should be in a new line. and i have to add the Constants like :20:, :23B: etc before each field. How can
-
Migration of ADF 10g application to ADF 11g(Portlet Customization Error)
Hi, Currently we are doing a migration of ADF/Webcenter 10g appication to 11g(11.1.1.6) and in the current 10g application portlet is used which contains the file based content and can be customized using a specific role say(admin). We have almost do
-
Palm Desktop reinstall on new hard drive
Configuration: Palm 515, Windows XP Pro, Palm Desktop 4.1.4, Hotsync 4.0.4 Installed new hard drive on PC, reinstalled Windows, installed Palm Desktop and copied existing files (address, etc) onto new drive. Problem - User 1's contacts did not appea
-
I'm using ipad2 with ios5. My outbox won't send mail. I guess i need an outgoing server and can't find it anywhere. Any suggestions on how to get it to send. I have tried everything, rebooting, ensuring passwords are correct, etc.
-
I recently created a custom flash player in Adobe Flash CS4, but when I try to use that skin in Dreamweaver it doesn't show up as an option. What do I have to do to make so I can use my customly made flash player in Dreameaver?