HT5429 Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?
Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?
Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus
Similar Messages
-
after upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?
This started happening to me on my iPhone 4. Some text messages show only the numer they came from and those same numbers do not show the contact name in my calls list, even though the contacts are saved and synced via iCloud. I have tried to save different versions of the number in the same contact, but it won't work. If I call one of the recent numbers though, the conact comes up. I have tried reseting and restoring to no avail.
-
At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?
quick test based on screendump from your picture
1: hue & saturation : master sat -100
2:levels : input white=67
OK ? -
Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..
I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!
-
the apli "maps" on my iphone4 never give my right position, i mean my correct adress.
Is there any way to reboot this? and make sure that when i'm home i can send my (right) adress please? thanksI am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps. -
Bought my laptop off my room mate and he had master reset it to default. This still left his name as the computer name and I wanted to change that. Tried to rename it under the advanced changes section, and now it isn't recognizing my password for anything more than logging in. I can't unlock the settings to make further changes (or change it back). I have had my room mate try all of his old passwords and usernames, to no avail. Is there a way to reset this? It's also not letting me wipe the drive and start fresh again because, alas, I don't have access without the password. Any advice would be very helpful. Thank you!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
If I have a mozilla.com window open and I try to type "mouse" to automatically search through my bookmarks and history for something on about mice, for example, the location bar changes the "mo" to "ht", due to the autocomplete replacing what I was typing with the URL of the mozilla.com tab, which starts with http://.
This is really annoying... since if I continue typing the word "mouse" it replaces it with "htuse". Which is useless to me, trying to search for mice.
Any way to fix this?There is a way that you can do this, but it does mean abandoning CNAME forwarding that you have already set up and just using ordinary masked web forwarding. In this way you can go to the web forwarding section at your domain name registrar and forward your domain name to web.me.com/username/sitename. This will re-direct your site in the way that you want, but because it is masked web forwarding, just your domain name will show as the url for every single page, so you cannot bookmark single pages of a site, just the whole site.
If you use an iWeb blog and you mess around with moving the pages around in your iDisk, then you will loose MobileMe features such as the ability to post comments and also as you have already found, when you publish from within iWeb, it automatically publishes to the same place on your iDisk and not where you have moved your site to.
If I were you I would set up an individual blog with WordPress or Blogger or something similar - if you have an ordinary web host you can upload WordPress there and this then has the advantage of you being able to use your domain name followed by blog or whatever. It is a lot simpler than fiddling around with the iWeb blogging system - I have a blog on my own site and I use WordPress. My site was designed using iWeb and I just create a link from my site to my blog at WordPress - couldn't be simpler really. -
READ THE TITLE PLEASE
The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141 -
I got the new appl3 tv for christmas for itunes and mirroring etc .I have a problem trying to mirror from my Ipad as i cannot find the airplay icon .is there a easy soluation to this problem my Ipad model is
A1395 MODEL year 2011http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
http://appletv2.com/airplay-icon-missing-ios-7/
Cheers, Tom -
Ipad2 came without messages app. Please help me in figuring out why! :)
What version of iOS have you get (Settings > General > About > Version) ? Messages was introduced with iOS 5, so if you aren't on that then you can update to it and you should get the Messages app.
Connect the iPad to your computer's iTnnes and copy any purchases off the iPad via File > Transfer Purchases (you may also want to copy photos off the iPad as well) and then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'. You may also want to copy off the iPad any important documents, notes, files etc e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
You can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
My IPOD touch 4th gen screen does not display. The software seems to be working and itunes recognizes the device. I have restored it and reset the IPOD several times but the screen is still black. What can I do to fix it? your help is very much appreciated. I do not have access to an apple store since I am stationed in Afghanistan.
If you restored to factory defaults/new iPod (you did not say the type of restore your performed) and are still having the problem that indicates a hardware problem. An appointment at the Genius Bar of an Apple store is in order..
-
This seems like something apple should fix. Fine I have to fix it one time but why such a constant issue?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414 -
Is There any way to improve the performance on this code
Hi all can any one tell me how to improve the performance of this below code.
Actually i need to calculate opening balance of gl account so instead of using bseg am using bsis
So is there any way to improve this code performance.
Any help would be appreciated.
REPORT ZTEMP5 NO STANDARD PAGE HEADING LINE-SIZE 190.
data: begin of collect occurs 0,
MONAT TYPE MONAT,
HKONT TYPE HKONT,
BELNR TYPE BELNR_D,
BUDAT TYPE BUDAT,
WRBTR TYPE WRBTR,
SHKZG TYPE SHKZG,
SGTXT TYPE SGTXT,
AUFNR TYPE AUFNR_NEU,
TOT LIKE BSIS-WRBTR,
end of collect.
TYPES: BEGIN OF TY_BSIS,
MONAT TYPE MONAT,
HKONT TYPE HKONT,
BELNR TYPE BELNR_D,
BUDAT TYPE BUDAT,
WRBTR TYPE WRBTR,
SHKZG TYPE SHKZG,
SGTXT TYPE SGTXT,
AUFNR TYPE AUFNR_NEU,
END OF TY_BSIS.
DATA: IT_BSIS TYPE TABLE OF TY_BSIS,
WA_BSIS TYPE TY_BSIS.
DATA: TOT TYPE WRBTR,
SUMA TYPE WRBTR,
VALUE TYPE WRBTR,
VALUE1 TYPE WRBTR.
SELECTION-SCREEN: BEGIN OF BLOCK B1.
PARAMETERS: S_HKONT LIKE WA_BSIS-HKONT DEFAULT '0001460002' .
SELECT-OPTIONS: S_BUDAT FOR WA_BSIS-BUDAT,
S_AUFNR FOR WA_BSIS-AUFNR DEFAULT '200020',
S_BELNR FOR WA_BSIS-BELNR.
SELECTION-SCREEN: END OF BLOCK B1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'S_HKONT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
SELECT MONAT
HKONT
BELNR
BUDAT
WRBTR
SHKZG
SGTXT
AUFNR
FROM BSIS
INTO TABLE IT_BSIS
WHERE HKONT EQ S_HKONT
AND BELNR IN S_BELNR
AND BUDAT IN S_BUDAT
AND AUFNR IN S_AUFNR.
* if sy-subrc <> 0.
* message 'No Data' type 'I'.
* endif.
SELECT SUM( WRBTR )
FROM BSIS
INTO COLLECT-TOT
WHERE HKONT EQ S_HKONT
AND BUDAT < S_BUDAT-LOW
AND AUFNR IN S_AUFNR.
END-OF-SELECTION.
CLEAR: S_BUDAT, S_AUFNR, S_BELNR, S_HKONT.
LOOP AT IT_BSIS INTO WA_BSIS.
IF wa_bsis-SHKZG = 'H'.
wa_bsis-WRBTR = 0 - wa_bsis-WRBTR.
ENDIF.
collect-MONAT = wa_bsis-monat.
collect-HKONT = wa_bsis-hkont.
collect-BELNR = wa_bsis-belnr.
collect-BUDAT = wa_bsis-budat.
collect-WRBTR = wa_bsis-wrbtr.
collect-SHKZG = wa_bsis-shkzg.
collect-SGTXT = wa_bsis-sgtxt.
collect-AUFNR = wa_bsis-aufnr.
collect collect into collect.
CLEAR: COLLECT, WA_BSIS.
ENDLOOP.
LOOP AT COLLECT.
AT end of HKONT.
WRITE:/65 'OpeningBalance',
85 collect-tot.
skip 1.
ENDAT.
WRITE:/06 COLLECT-BELNR,
22 COLLECT-BUDAT,
32 COLLECT-WRBTR,
54 COLLECT-SGTXT.
AT end of MONAT.
SUM.
WRITE:/ COLLECT-MONAT COLOR 1.
WRITE:32 COLLECT-WRBTR COLOR 1.
VALUE = COLLECT-WRBTR.
SKIP 1.
ENDAT.
VALUE1 = COLLECT-TOT + VALUE.
AT end of MONAT.
WRITE:85 VALUE1.
ENDAT.
endloop.
CLEAR: COLLECT, SUMA, VALUE, VALUE1.
TOP-OF-PAGE.
WRITE:/06 'Doc No',
22 'Post Date',
39 'Amount',
54 'Text'.
Moderator message : See the Sticky threads (related for performance tuning) in this forum. Thread locked.
Edited by: Vinod Kumar on Oct 13, 2011 11:12 AMHi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus -
How can i see the text of one view?
I want to see the text of one view stored in my Oracle DB, then i run the next query:
SELECT TEXT FROM ALL_VIEWS WHERE VIEW_NAME = view_name;
The problem is that the information return me truncated.
How can i see the text of one view?
Sorry, my English is terrible.
I'm from Argentina.Use 'set long 100000000' at sql prompt. Run your query again.
-
My question...
any answers pl.
I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlierIf I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
=
RANKX(
ALL(Table1),
CALCULATE(
COUNTROWS(table1),
ALLEXCEPT(Table1, Table1[ContactReason])
DENSE
If this has missed the mark, would it be possible to clarify the requirement further?
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn
Maybe you are looking for
-
Adobe Media Encoder CC 2014 would not be updated to 2014.0.1.
The update has failed many times. I just uninstalled to it in order to reinstall
-
Scan a document from online scanner
Hi Guys, I need to scan a file from online scanner , attached the same file with a document no & store it into the DMS server. Regards Sathis
-
How to get Oracle RTC Messenger contacts information?
1. How can I get OCS 10g R2 RTC Messenger contacts information? 2. Can the method be used for web presence? Thanks.
-
I want to configuring database for archivelog mode,so I execute following command: SQL>shutdown immediate then I use window tablet to modify the file of 'D:\oracle\ora92\database\SPFILESUCCESS.ORA' and add Log information in this file,like follows: b
-
Not able to download jdeveloper
Hi, While trying to download jdeveloper from http://www.oracle.com/technetwork/developer-tools/jdev/downloads/soft11-098086.html , i am getting an error in the midst of the download. It says the connection has been reset/Please contact your server ad