HT5429 My business is in the incorrect location on maps

My office location is in the incorrect location on apple maps and I've tried to change it for the last 2 years without any luck. Any suggestions?

Reporting Maps errors: Apple Support Communities

Similar Messages

How can I drop the previous location on maps

How can I drop the previous locations on maps?

Best I could find for now, although it didn't automatically fix the problem:
- Click on your "Current Location" dot
- Click on Info icon in the little pop-up window
- Click the "Report a Problem" button
- Choose "Information is incorrect" from the dropdown menu on top
- You can change your "Current Location" address info here, which I'm assuming will be sent to Apple. It didn't automatically change the information for me, but at least I was able to send a specific report about it.

Business address points to wrong location on map

When entered into the Apple maps app, the address of my business sends my customers 15 miles away into the boonies. I have done the report a problem and moved the pin in the app NUMEROUS times over the last 6 months. Is there any way to contact someone that can actually do something about this? It is beyond frustrating for me and my customers.
Thanks

Is there a way to modify the variable that windows GPO uses? In the GPO configuration window for shortcuts the target location is a drop-down menu and when you select desktop is uses the %DesktopDir% variable even though this isn't a valid.

Incorrect Locations

When I download photos contain GPS co-ordinates (from a Lumix DMC-TZ10), iPhoto sometimes assigns the wrong location. It seems to have a preferred "default" location which it has picked up from earlier photos and uses this in preference to the real one. When I delete the incorrect location name on the photo, the place name reverts to "no name", but the location is shown correctly on the map.
Any suggestions as to what's going wrong and how I deal with it?
As a subsidiary comment, my Lumix seems to be able to generate much more specific place names than iPhoto can, but this data is lost when I download the photos. I've read that this data can't be transferred, but if anyone knows otherwise, please let me know.
Many thanks.

When I download photos contain GPS co-ordinates (from a Lumix DMC-TZ10), iPhoto sometimes assigns the wrong location. It seems to have a preferred "default" location which it has picked up from earlier photos and uses this in preference to the real one. When I delete the incorrect location name on the photo, the place name reverts to "no name", but the location is shown correctly on the map.
Any suggestions as to what's going wrong and how I deal with it?
I do not understand what you are seeing. Are you saying that the coordinates are correct but iPhoto uses a different place name (I have never seen or herd of this except where there are database errors) or that the coordinates are of an older photo (My Sony will do this if I do not have GPS sync in the new location)
As a subsidiary comment, my Lumix seems to be able to generate much more specific place names than iPhoto can, but this data is lost when I download the photos. I've read that this data can't be transferred, but if anyone knows otherwise, please let me know.
As you were told you can not currently use the location name data from the camera (or the compass direction if the camera includes that) - suggest to Apple - iPhoto menu ==> provide iPhoto feedback
LN

How to delete the incorrected Functional Location / Equipment

Dear PM Guru's
please let me know the procedure to delete the incorrected functional location / equipment or any other data like plans, orders, task lists etc. i went in change mode and i clicked on Deletion flag and clicked on Set option. when it will be deleted from data base is it required any other customized settings. if any thing required please tell me.
regards
jalu

Hey,
Deletion in SAP is not easily possible. That's is the reason, so much attention is given while creating such masters. Most of the masters in SAP can only be flagged for deletion i.e. you don't move it out.
To move out from database, you need to perform Archiving. It's a separate function, which is performed, servers handling the archival data are different.Accessing the archived data is also different. Once you archive, the flagged for deletion items are essentially moved and you don't see them in your regular servers.
As of now, you can only flag them for deletion. I hope this explanation makes things clear.
Regards,
Ketul

HT5429 How do I remove items from the "current location/to" list?

In MAPS, how do I remove items from the "current location/to" list?

Hit the book icon and you will see delete all option. I have not found a way to delete them one at a time.

"Check Business Area of the company code" error while posting stock

Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Hali

hi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay

Changing the default location PowerPoint uses for templates

I do not want to use the default location MS Office initially configures for templates that is buried in some obscure folder on a local machine in that only Office know about. Instead want to keep my templates in the same location on a company server
with the rest of my materials so I can access it from my company laptop or from the Virtual machines I am forced to use in other company locations. This way I will have my templates everywhere I work. When I make changes they are available to me everywhere
I work and are not buried in a folder on a laptop or a virtual machine in a conference room half a world away.
MS Word allows users to configure this default location for templates but no where in PowerPoint can I find any way to configure this location. Previously on my laptop I have been able to configure the default PowerPoint template location, I believe, by
setting the location in MS Word; however, this is not happening for me now on the virtual machines I am using when away. I have scoured the Options settings and if it is there it is well hidden.
To make matters worse I am trying to use what PPT is providing to me while I sort this out and when you try to open "My Templates": there is a message that says:
"To add a template to My templates, click the File tab, click Save As, click Trusted Templates, and then save the file as a template."
Of course when I follow these instructions there is no folder named Trusted Templates on the left side of the dialog box. I am not sure why it is so difficult to allow us to configure this ourselves for each program but apparently it is.

Hi,
Please refer to this kb below:
http://support.microsoft.com/kb/924460/en-us
As mentioned, if you use Word 2007 or Word 2010 to change the location in which your new templates are saved, you also change the location in which all 2007 Office program templates or all 2010 Office program templates are saved.
Office programs use one registry key to record the user templates file location, you can browse to the following path to check if it's recorded:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\General
The user templates location is stored in the
UserTemplates
string value.
If it doesn't exist, try to manually add it, check if this helps. Detailed information can also be found in the kb introduced above.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry:http://support.microsoft.com/kb/322756/en-us
Regards,
Melon Chen
TechNet Community Support

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Secondary hard drive and dvd drive have the same location id's.

Product Name: HP Pavilion dv7 Notebook PC (DV7t-7000)
PRODUCT NUMBER: A5F92AV
SERIAL NUMBER: [removed for privacy]
My Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
Please help,
Thank you
-Rick

This is what chat support said... Its like talking to yourself sometimes!!
[Wednesday, October 24, 2012 10:33 PM] -- Automatically generated message:
Your support request has been submitted and is in queue. Please wait momentarily while the system connects you with the next available support specialist.
[Wednesday, October 24, 2012 10:46 PM] -- Automatically generated message:
You are now chatting with support specialist JOLLY R.
[Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
Welcome to HP Total Care for Notebook and Desktop support. My name is Jolly. I will be your technical support specialist today. Please give me a few moments to review your issue description details.
NOTE: For security reasons, PLEASE DO NOT send credit card information via chat.
[Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
How are you doing today ?
[Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
Hi Jolly, I tried 3 different HDD's all of them were reformated and reimaged with the HP image from this laptop. When I try to populate the drive, it just closes the window. Same with the dvd drive. Other then no able to write to the dvd/cd drive, everything else is perfect. But that is not good enough...
[Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
Great, you?
[Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
I am fine. Thank you for asking.
[Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
Please let me know if the following details are correct for the notebook in question.
PRODUCT NUMBER: A5F92AV
SERIAL NUMBER: {Private Information Removed}
EMAIL ADDRESS: {Private Information Removed}
Am I correct?
[Wednesday, October 24, 2012 10:48 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
Thank You for confirming the details.
[Wednesday, October 24, 2012 10:49 PM] -- JOLLY R says:
Are you using the same notebook to chat with me which is in question?
[Wednesday, October 24, 2012 10:49 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:51 PM] -- JOLLY R says:
May I know since when you are facing the issue?
[Wednesday, October 24, 2012 10:51 PM] -- Rick Friedman says:
I few weeks ago now
[Wednesday, October 24, 2012 10:52 PM] -- Rick Friedman says:
HP swapped out the DVD drive and I swapped out the HDD's
[Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
Please click on the start button and click on computer.
[Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
Reimaged, renamed, removed, rotated them to different bays.
[Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
ok
[Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
Open\
[Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
Is the CD/DVD drive getting detected ?
[Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
Yes
[Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
So you need te reseat the CD/DVD drive and the hard drive .
[Wednesday, October 24, 2012 10:55 PM] -- Rick Friedman says:
I did, over and over and over
[Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
Okay
[Wednesday, October 24, 2012 10:56 PM] -- Rick Friedman says:
I have swapped out the dvd drive and hard drives
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
Since you have already reseated the hard drive and CD/DVD drive, you need to send the notebook in for a bench repair.
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
It will be a mail in repair service. I will send you a box along with packaging materials and a prepaid shipping label. Once you pack your notebook in the box you can drop it off at you nearest fedex drop box or you can schedule a pickup.
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
Box would contain- packaging material, shipping instructions & pre-paid shipping label.
• Once you receive the box you need to put the notebook inside the box (without any accessories), call fed-ex- (1800-463-3339).
• Fed-ex would come at your place pick it up and send it back to hp.
• This service will cost you $0.00
• Standard turn around time for service is 7-9 business days.
You can check the status of your order by going to: www.hp.com/go/csostatus or by calling HP Customer Care at 1-800-hpinvent (1-800-474-6836).
Your repair service has an estimated turn around time of 7 to 9 business days from when we receive your product at our repair center.
[Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
In order to set up a service request please provide the following information:
* Full Name:
* Mailing Address (No P.O. Boxes):
* Apartment/Building/Mailstop:
* City:
* State:
* Zip/Postal Code:
* E-Mail address
* Phone Number (including area code):
* Best time to call
* Time zone of your region
[Wednesday, October 24, 2012 10:57 PM] -- Rick Friedman says:
Dont I have on-site?
[Wednesday, October 24, 2012 10:58 PM] -- JOLLY R says:
Let me check.
[Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
This laptop is my life, my livelyhood.
[Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
I can not be without iot...
[Wednesday, October 24, 2012 11:00 PM] -- JOLLY R says:
I do understand that .
[Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
Yes, you do have onsite , but a technician can be sent to your place only if any part needs to be replaced .
[Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
As the notebook needs to be repaired , you have to send it to the HP service center.
[Wednesday, October 24, 2012 11:02 PM] -- Rick Friedman says:
It is the motherboard
[Wednesday, October 24, 2012 11:03 PM] -- Rick Friedman says:
What is the difference between repair and replaced?
[Wednesday, October 24, 2012 11:03 PM] -- JOLLY R says:
It will be repaired and returned back to you .
[Wednesday, October 24, 2012 11:04 PM] -- Rick Friedman says:
But what is there to be repaired if your not replacing anything?
[Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
If any hardware part needs to be replaced , a technician can be sent to your place .
[Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
But since the notebook needs to be repaired ,you have to send it .
[Wednesday, October 24, 2012 11:05 PM] -- Rick Friedman says:
What is the difference between repaired and replacing something... So you mean that nothing will be repaired on my laptop?
[Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
This is NOT right
[Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
I mentioned earlier that you need to send the notebook for repair.
[Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
I would like to talk to someone about this.
[Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
It will be repaired and returned back to you .
[Wednesday, October 24, 2012 11:07 PM] -- Rick Friedman says:
What is the turn around time on this?
[Wednesday, October 24, 2012 11:07 PM] -- JOLLY R says:
It is 7 to 9 business days.
[Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
NO WAYYYY!
[Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
If you want to talk to someone , you need to call our voice support in the direct number 1-800-474-68386 and refer to serviceticket number - {Private Information Removed}.
[Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
OK, thx
[Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
We also have an expedite shipment, where the turn around time is 4 to 6 business days .
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
Please take down the service ticket number {Private Information Removed} and SR ID {Private Information Removed} for future reference.
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
You are welcome.
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
Is there anything else apart from this I can help you with now ?
[Wednesday, October 24, 2012 11:09 PM] -- Rick Friedman says:
No
[Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
Thank you

Business systems group setting in location master

Hello experts,
I am currently in the process of trying to set up the integration models for a second R3 system to be connected to one APO system. All of the locations / plants for the first R3 system were created under BSG1. The locations / plants for the second R3 system were created under BSG2.
I have identical product in both R3 systems. They have the same material numbers. The materials have existed in APO for quite some time under BSG1. When I try to send the material numbers from the second R3 system, I get an error that the materials already exist in a different business systems group. I changed the config for the second R3 system to be BSG1 (same as first r3 system). But now I cannot create an integration model for my plants, because they already exist under BSG2.
If I change my locations / plants to BSG1 would that correct my initial error message? Is there a way to change the business system group of a location once a location already exists in APO?
FYIu2026 I tried using /SAPAPO/DELETE_LOCATIONS to delete the locations and resend them, but /SAPAPO/DELETE_LOCATIONS doesnu2019t seem to do anything. After I run the program, I still have all of the locations in APO, whether the location was flagged for deletion or not.
Thanks,
Matthew Bruckner

Hi Matthew Bruckner
do you set deletion flag to your location master ? If not, please set deletion flag at first, then please delete your location by using /SAPAPO/DELETE_LOCATIONS .
To set deletion flag to your location, please perform following.
1. Open transaction /n/sapapo/loc3
2. From the menu, select "deletion flag".
(the location should be de-assigned from related data like product, model)
3. delete your location by using /SAPAPO/DELETE_LOCATIONS .
And if you have same location or same location product, I recommend you to add some kind of information to your location and product by using CIF user exit.
Please take a look at my comment in following thread.
Re: Integration multiple R/3 systems with APO via CIF
best regards
Keiji Mishima

Why can't FC save the folder locations set for render files?

I wrongly assumed that when you go to system settings to select the scratch disks (root folder where all the audio and video render folders and files go, capture files, etc.) that Final Cut would save the folder locations within the FC project you are working in. Makes total sense, but for reasons I don't understand, FC does NOT save these folder locations and the result is that I have render files scattered all over the place on my hard drive and it is quite a mess! Fortunately, the project file remembers where it put the render files, so as long as you don't remove or rename any project folders, everything shows up rendered on the time line as it should. The problem is, if I'm working on several projects at once, I have to reset the scratch disks every time I reopen a project, otherwise the program will save it to the last scratch location selected and put all of the render files in another project's folder. I often forget to reset the scratch disks when I'm busy and now I have render files mixed up in various project folders.
Why can't you just set the scratch disks one time when you first set up the project and have the project always remember that location, instead of always having to reset them every time you reopen a project. I love Final Cut, but this is a product defect that should be addressed and corrected. If the project file can remember where it is putting all the render files, it should also be capable of remembering the scratch disk locations you originally selected when you first set up the project or better yet, save it to the project's root folder by default. Am I missing something here?

As MtD describes, FCP sets file locations for ALL projects at the system level. It may help to organize things this way so your files don't end up scattered across multiple locations.
Save the project files to your User folder on the boot drive.
For all the other files FCP creates, set them on a non-boot drive similar to this:
Media Drive
----->FCP Documents
---------->Autosave Vault
---------------->Acme Widgets Demo (sample project name)
---------------->Grass Valley Music Video (sample project name)
---------------->Jen's Wedding (sample project name)
---------->Audio Render Files
---------------->Acme Widgets Demo (sample project name)
---------------->Grass Valley Music Video (sample project name)
---------------->Jen's Wedding (sample project name)
---------->Capture Scratch
---------------->Acme Widgets Demo (sample project name)
---------------->Grass Valley Music Video (sample project name)
---------------->Jen's Wedding (sample project name)
----------->Render Files
---------------->Acme Widgets Demo (sample project name)
---------------->Grass Valley Music Video (sample project name)
---------------->Jen's Wedding (sample project name)
----------->Waveform Cache
Of course, you can choose to keep renders or the Autosave Vault folder on other drives ... just keep them off your boot drive. It may not be the way you're use to working, but it's worked well for me the past 14 years. When you finish with a project and ready to delete the associate files, just go to your media drive and delete folders bearing the project's name.
-DH

InDesign 2014 files don't save in the same location as the original file

The behavior in InDesign CC was to automatically save the file in the same location. I understand this is a new version, and saving my InDesign 2014 files should open a save dialogue. But I don't understand why InDesign seems unaware of the file's location. In this new version I have to navigate to the files location to overwrite, and that is taking extra time that the previous version did not require. Is there a way to restore the previous behavior. I have looked in Preferences, but I can't find a way to revert to the old behavior. Any advice would be appreciated. -Thanks.

As Peter noted, it has ALWAYS been this way. It’s a one time thing.
You can file a feature request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Make sure to file a complete description along with a solid business case as to why most users would benefit.

How to concat the data located in ctrl:eventResult and fixed data ?

I want to concat the data located in ctrl:eventResult and the content of <fixed> ,like the following(it is incorrect):
<messageTextInput name="name">
<boundAttribute name="prompt">
<concat>
<dataObject select="listName"
source="ctrl:eventResult"/>
<fixed text="Hello"/>
</concat>
</boundAttribute>
Thanks.

I don't see anything wrong with your code - I was able to set up a small test case using it and didn't see any problems with concatenation. Are you certain that you are setting up the EventResult property correctly? Does the following code work?
<styledText data:text="listName@ctrl:eventResult"/>Can you post your code which creates the EventResult object?
Andy

HT5429 My business is in the incorrect location on maps

Similar Messages

Maybe you are looking for