HT5429 Why does iOS 6 Maps in China only shows China and nowhere else ?

I was in China recenlty and took an opportunity to walk into one of the Apple Stores there to look at an iPad running iOS 6 - true enough the Maps software upgrade was dysmal, it placed the store in a wasteland, but more interestingly I tried looking for Japan - I couldnt find it... at first I thought this was due to the recent issues between the two Countries, but even when zooming out as far as I could, all I could see was the outline of China and no other Country.... is this the Norm for the new Apple Maps ?

At the bottom left of the maps screen is a little arrow. Touch it, and the map should display where you are.  Future searches will start from there, until you touch it again ( if you are traveling....).  If you touch it and it shows you are in Australia, it is likely because the location it is using is based on a database that thinks your router is in Australia. 
Go somewhere else, like the local Starbucks and try again.  At some point it will reset your router location.  M

Similar Messages

  • Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

    Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

    Now correct me if I'm wrong but I am sure I have read that the parallax effect in iOS 7 is the main reason behind wallpapers not being able to be shrunk. However, even disabling the effect will not allow you to resize the pictures like you could in previous versions of iOS, so as Skydiver119 said, it kind of is a glitch. If you are like me, and don't regularly change your wallpaper, then it may be worth creating a photoshop document which is slightly larger than your screen resolution(400px in each direction or so) and then placing your picture to suit, before copying it your device. Obviously, this would not be ideal if you were changing your wallpaper daily or very regularly as it would be a bit of a hassle having to do this every time you wanted to change your wallpaper.
    Hope this Helps!

  • Why does Acrobat Pro X (win7) only shows custom settings when scanning from Lexmark x543 MFP?

    WIN 7
    10.3.1

    Installed Acrobat: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe     Version: 10.1.3.23
    Only Custom scan is available when creating pdf from scanner  

  • Why does my Lexar USB drive ONLY show in Disk Utilities?

    I have read other questions about disk drives NOT showing up on Desktop. I do have external disks checked in preferences AND when I go to save an excel file it shows the drive as an option to save to. I have files on it, WHY CAN I NOT ACCESS IT!?
    Whether it is simple or not, I'm not figuring it out please help!

    Disk Utility can sometimes see external drives that don't register on the Desktop. This can also apply to damaged USB drives.
    Have you tried this? In Disk Utility, click on (highlight)  the Lexmar USB drive listed on the left side, then on the toolbar click the icon, Mount. With a bit of luck this may now show on the Desktop.

  • HT4623 why does the newsfeed on fb only show most recent and top stories on my i phone 4s but not all stories as it did till yesterday?

    Hi, until yesterday i was able to rceive all stories fro friends on my I phone 4s using Fb. Now i can only get top storoes and most recent. Ive reinstalled fb and udated software. no change... help?

    no idea. try https://www.facebook.com/help/

  • Why does the album artwork appear only when the first song is playing only?

    Why does the album artwork appear only when the first song is playing only?

    Hello ckuan. Thx for your reply.
    The songs are not from iTunes, they are from CDs that I had copied to my itunes library.
    It is worth mentioning that I wasn't facing this issue before IOS 5.

  • Why does my maps app and now apple store app keeps crashing

    Why does my maps app and now apple store app keeps crashing

    Hi there oceanspan,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    -Griff W. 

  • Why does my Alesis ioj2 express only come out through one side? When I sing into the microphone, it only comes out one side. I've set everything to stereo and it still has not solved the problem. Please help ASAP.

    Please help with my problem. I need to start recording!!

    Chris Huber wrote:
    Why does my Alesis ioj2 express only come out through one side?
    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size?

    When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size from canon 5d mark iii, in older versions I used to be able to import the files as larger images. It use to have a number of options for the images size. The option now is smaller than the maximum size used to be.

    You know what - I'm sorry
    I'd had a crazy long all-nighter session sorting out images for a client, then decided - when I should have simply gone to bed - to set up the new photoshop. At the very start I made a silly mistake, tried to sort it out then decided to call it a day, responding to your remarks with the problem still in my head but feeling more and more tired.
    Responded again to your comment earlier with the problem still in my head but not in front of me on the screen - however with a fresh head I just turned it all on, opened up PS and today could instantly see what was going on - Oops!
    Thank you for being patient with a sleep deprived photographer who must have been getting annoying yesterday
    I am officially embarrassed
    M

  • Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??

    Why Does Premiere Pro CS4 Import Only 10 Seconds Of Layered Photoshop CS4 .psd??
    I have a 24 second clip I layered in Ps and when I import the psd into Pr THE SEQUENCE IS ALWAYS ONLY 10 SECONDS!
    How can I change this?  Why does this happen?  I really need to know as soon as possible.  I have a video project due this Wednesday (granted it's for an AV class where I'm just learning Pr.  But I can learn VERY FAST!)
    Thanks for your help.
    --OSXniCKels

    Just in case I wasn't clear in my last line "just Click-drag on the Tail of your .PSD to set the desired Duration," once you have Imported your .PSD (as Footage), just drag it to the Timeline, Click-drag on the right-hand margin (the Tail) and stretch out its Duration, as is required.
    Now, if you Imported as a Sequence, open that Sequence's Timeline, and do the same.
    I normally will set my Edit>Preferences>Still Duration to about what I think will be applicable, do my Import, and then with the Info Panel handy, just alter the Duration to suit.
    Good luck,
    Hunt
    PS - Welcome to the forum.

  • Why does the itunes cloud only show sometimes and what does it do?

    Why does the itunes cloud only show sometimes and what does it do?

    Hi there tettyuk,
    You may find the information in the article below helpful.
    iTunes Match: Understanding the iCloud Status icons
    http://support.apple.com/kb/ts4124
    -Griff W.

  • Why does the iphone 4 work only intermittently with the Sony HCB150 speakerphone?

    Why does the iphone 4 work only intermittently with the Sony HCB150 speakerphone?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If the issue persists, take the device to Apple for further assistance.

  • Why does iOS 5.0.1 always say, my iCloud Password is incorrect, when i try to use my iCloud email account?

    Why does iOS 5.0.1 always say, my iCloud Password is incorrect, when i try to use my iCloud email account?
    Btw: The password works in all other issues.

    I GOT IT !
    JUST BE SURE UR DESCRIPTION IS NOT (f.E.) iCloud OR SO ON.
    THE DESCRIPTION MUST BE JUST LIKE UR EMAIL NAME !!!
    IF U GOT "[email protected]" => UR DESCRPTION MUST READ "MY-NAME"
    This is how it worked for me, so ...
    ... just hope it help´s
    greez

  • Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

    I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
    A.) Multiple clipping paths around it
    B.) Most text has now become outlined. Not editable anymore.
    C.) Gradient areas have multiple clipping paths of the single gradient area
    D.) The gradient areas now become rasterized.
    This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
    Please help.
    Thank you very much

    John,
    I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
    But still a bit confused as to why the new save places clipping paths around the document.
    Thank you John and Monika for your help.
    why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
    created by John Mensinger in Illustrator - View the full discussion
    I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
    but i seem to be lost.
    It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
    Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
    That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Why does my 16gb 6th generation ipod nano skip and stutter during playback?

    Why does my 16gb 6th generation ipod nano skip and stutter during playback?

    Try a hard reset first. 
    Press and hold the Sleep/Wake button and the Volume Down button 
    until the screen goes dark. The Apple logo appears after a few seconds, 
    and then the Home screen.
    If that doesn't work, try a restore of the device in iTunes.
    Otherwise, does this skipping and stuttering only happen with certain tracks?  What format are these tracks in and where they come from (outside of iTunes or from the iTunes store itself)?
    B-rock

Maybe you are looking for