HT5439 i can't access my university anyway, how can i add username and password?

i try to use this solution to apply my university proxy, but it dodn't work. Can u suggest me more about how can i add username and password?

You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

Similar Messages

I'm trying to access a forum that requires a user name and password. When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem. I can confirm the username and password are the same

I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.

Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.

HT1660 After going for a few years without using my iTunes account I bought an iPhone and am trying to access the old songs I purchased. The username and password worked, but I can't locate those songs. Have they been deleted?

After going for a few years without using my iTunes account I bought an iPhone and am trying to access the old songs I purchased. The username and password worked, but I can't locate those songs. Have they been deleted?

Hello Bennett,
The following article provides a comprehensive guide to locating and downloading your past purchases, should they be available for download.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

Reg : How can I get Username and Password in FTP Server in HANA

Hi All,
Any one can you please guide me....How can i get username and Password of FTP Server in SAP HANA?
Regards,
Arjun

Hi Arjun,
Are you looking for external authentication(External ID option) in HANA Studio instead of logging by entering HANA User and Pwd(which is internal)?
You can look for the following Security guide which will give you some insight on this.
http://help.sap.com/hana/hana1_sec_en.pdf
Rgds,
Murali

How can I pass username and password in a client bean to call a webservice?

Hi,
I have created a Client Java Bean for a web service (an automatically created Service from a Bapi) that requires username and password. How can I pass username and password in the code?
Thank you!
Julia
This is my code:
public Z_FlightGetlist port;
Business Method.
public String test1234() {
try{
BAPI_FLIGHT_GETLIST list = new BAPI_FLIGHT_GETLIST();
list.setAIRLINE("KLM");
port.BAPI_FLIGHT_GETLIST(list);
return "ok";
catch(Throwable e){
return "error"+e;
public void ejbCreate() throws CreateException {
try{
InitialContext ic = new InitialContext();
Z_FlightGetlistService s = (Z_FlightGetlistService)ic.lookup ("java:comp/env/FlightProxy");
Z_FlightGetlist vi = (Z_FlightGetlist)s.getLogicalPort(Z_FlightGetlist.class);
this.port = vi;
catch(Throwable e)

Hello Julia,
Check this document
http://help.sap.com/saphelp_nw04/helpdata/en/50/a5d13f83a14d21e10000000a1550b0/frameset.htm
Best regards, Maksim Rashchynski.

No cursor on any website, and boxes are too small to type username and password. Example I can't type username and password for yahoo e-mail

Example of no cursor. Any website, such as youtube, there is no cursor in the box, and there are no letters when I type, but the system recognizes what I type. As for e-mail, hotmail works o.k., but with yahoo the boxes for username and password are too small, there is no cursor and I can't type anything. With gmail, there is no cursor, but I can type my username and password.

Try:
iOS: Troubleshooting FaceTime and iMessage activation

Server 2003 VPN clients can't verify username and password

Hi,
Hoping someone can help or point me in the right direction. I have a Windows Server 2003 R2 standard SP2 running RRAS. It has Dual NIC's and is configured for PPTP VPN. I am using a BT Business Hub 5 for internet access and using the BT Static IP service.
The BT Hub assigns the static IP address chosen to the Server using DHCP. The firewall is configured to port forward PPTP traffic to the 2003 server. This all works correctly.
The 2003 server is on a domain where the DC is a 2008 R2 server. The DC also acts as the DNS and DHCP for the network.
The default gateway for the domain is pointed towards our WinGate proxy server which also acts as a DNS server.
The 2003 server LAN NIC is configured manually, usually I would not configure a deafult gateway on the LAN NIC as the WAN NIC needs the default gateway for the BT Hub.
The problem I am having is if a default gateway is configured on the LAN NIC, I can connect to the VPN and it will logon to the network. Once connected everything works ok. If the connection drops, when trying to reconnect the client can no longer verify
the user name and password against the domain and the connection is refused.
If I do not have a default gateway configured in the LAN NIC the VPN clients can not verify the username and password for the domain at all and I get RPC failure errors in the event viewer with the source dnsapi.
Once this error occurs the only way I can get the clients to reconnect is to disable the WAN NIC, restart the RRAS service and enable the WAN NIC again.
Any insight will be much appreciated.

Hello,
for Networking configuration questions better ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserverNIS&filter=alltypes&sort=lastpostdesc&content=Search
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

HT1338 how can i find username and password for MobileMe ?

please let me know which username and password should use for Mobileme.

MobileMe is closed; if you had an account and did not migrate it to iCloud it's lost. If you migrated it to iCloud the login is your @me.com email address and the password is what you chose.
If you never had a MobileMe account (and paid for it prior to June last year) the situation does not arise - you may have come across some old documentation encouraging you to sign up, but this is no longer possible.
You can open an iCloud account for free, which will give you email and syncing facilities:
Get Started with iCloud

Can't get username and password into client proxy

Hello all,
I am creating a client proxy using class xem_measurementImport (the doMeasurementImport method). I call this from an ABAP program, and it pushes measurement data into the EC (Environmental Compliance) system, which runs in Java. Everything has been running well, except for one thing. When I run the program in the foreground, it prompts me for a username and password, and when I run it in the background (it will be run that way in production), it gets a SOAP/authentication fails error message from the method, since username & password could not be supplied. I tried to recreate my client proxy, but when it is created, the wizard does not prompt me for my name & password, which it should do, so that it can supply it to the calling program via the logical port. Is this a configuration issue that Basis needs to address? Thanks for any help you can give.

gauravjlj wrote:
because client will install the mysql not me. and I need username and password for the further programming.
there is any file in mysql installation which can give me the username and password.
please tell me.
thanks
gaurav agrawalNo. If the "client" is installing the DB (and, I assume, administrating it, I.E. removing the large security holes that exist in the default installation), then why don't you simply ask the "client" for this info a dialog?
Otherwise, you should be providing a script in your installation package that modifies the DB to your needs, and instruct the "client" to install a "default" root password until after the script has run, and then to change the "root" password again. A Java application should definately not be worried about this stuff.

I couldn't access a website because I used an incorrect username and password.How do I reaccess with correct username and password. Thanks.

Getting into Avenue5Consulting members only area, I mistakenly used my other username and password. A message came up asking if I wanted to save it and I pressed yes. This didn't open the site, but brought me back to login page. Realizing that I logged in with erroneous username and password, I checked and logged in again with the right username and password, but these were not accepted. Please help! I need to get back to the site to finish my homework!
Will greatly appreciate your support.

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled

I can't log on to sites. I can enter my username and password but the "SIgn In" or "Log On" button is missing.

The "Sign In" button is missing. The logon box stays put and the page I'm trying to get to is grayed out behind it. On sites with captchas, there is no captcha for me to type. Just some lines of type that say "captcha challenge" piled on top of each other.

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Can you set username and password when using OWA_UTIL.REDIRECT_URL?

If you have a PSP that runs under a DAD that includes username and password and therefore doesn't require users to log in and you want it to do OWA_UTIL.REDIRECT_URL to another PSP that runs under another DAD that normally requires login using basic database authentication and the first PSP already "knows" the user's username and password, is there any way to use them to skip the login dialog of the second page? Maybe hack into the request and use UTL_HTTP.SET_AUTHENTICATION somehow...?

That doesn't seem to work, and trying that kind of url directly from the browser says "invalid syntax error", so maybe Oracle appserver just doesn't let you do that.
I got the idea of trying to add an authorization header:
OWA_UTIL.MIME_HEADER(BCLOSE_HEADER => FALSE);
HTP.P( 'Authorization: Basic mybase64encodedcredentials' );
OWA_UTIL.REDIRECT_URL('myurl', FALSE);
OWA_UTIL.HTTP_HEADER_CLOSE;
...but it didn't work either and with a little further thought I guess it's obvious why: any code here modifies the response header for this request, not the request header for the redirect.
Message was edited by:
psalmu

How-to access username and password protected Java EE Web services from ADF

The title of this post is exactly the same as this article by Frank Nimphius:
http://www.oracle.com/technology/products/jdev/howtos/1013/protectedws/access_protected_web_services_from_adf.htm
The article addresses the problem of securing web services using usernames and passwords, when those web services are accessed through a proxy or a data control. In the examples, the user names and passwords are specified, whether in the code or the definition of data controls. (SKING/SKING).
In a very common scenario, users login to reach a page, for example, A.jspx, which contains a button that calls a web service, for example displayDate. Suppose that user has logged in by username/pass of (AHUNOLD/AHUNOLD) and AHUNOLD has access to the service and the page. Is there any way to pass the logged in user name and password to the webservice ? Of course we can hard-code the username in the data control definition or proxy code, but this is just one of the thousands of users who have access to the service and the authentication is not dynamic this way.
Hope my question is clear. Wishing you all a great Christmas.
Farbod

Hi Frank, and happy new year.
Are you implying that it couldn't be done declaratively? What is your suggestion for this problem? You know the problem... As I described:
- I need to secure my web services, so when exposed, no one from inside network or the internet, can access the web service without proper permission
- The web services are shown as web controls on jspx pages. The user has logged in before reaching the page. It is irrelevant to ask him to enter user name and password again.
- I have user names, passwords and roles in Oracle Internet Directory (Identity Management). It provides some APIs and I can retrieve the usernames and attempt logging in programmically. But how can I get username and password from the session in ADF application?
I guess using SAML or certificate could be the solution, but I have a problem with SAML, described here:
Re: Webservices Security, SAML, and Identity Management (OID)
Best Regards,
Farbod

Can not specify the SMTP server port, username and password for my SharePoint 2013 web application

We have our SMTP server under port number 141 and we should add username and password. but inside SharePoint 2013, I can only define the SMTP server name , from email, reply-to . But there are not fields to define the port number , the username and password.
So can anyone advice from where I can define the port number and other field settings for the SMTP server ?
Thanks

i am no sure about user name and password. i never saw that option.
check this guide:
http://blogs.technet.com/b/tirumals/archive/2012/03/17/step-by-step-configuration-of-outgoing-emails-from-sharepoint-to-microsoft-online.aspx
http://blog.fpweb.net/configuring-an-smtp-server-for-sharepoint/#.UuANoxAo6M8
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
thanks for the reply, but in our case the SMTP is a separate server , and to connect to it i need to define the ; server IP /Name , port number, username & password. but in SharePoint there is no option to define the port number , and the links you
provide are regarding configuring SMTP server, while we already have an SMTP server but i need to connect SP with it . can you advice please?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

HT5439 i can't access my university anyway, how can i add username and password?

Similar Messages

Maybe you are looking for