HT5457 I can't see Internet vides or Netflix on my IPad II

I can't play ANY video on m y iPad 2 including news clips from CNN, USA Today, YouTube, etc., or Netflix movies. Do I need to download an app that I'm missing or add something to the OS? I appreciate the help!

Thanks James. I deleted the Netflix app and then reinstalled a new version from the app store. It seems to work now with Netflix AND the other video sources that I mentioned. How the new Netflix app would correct the other video sources is beyond me but it all seems to be ok now. Thanks!

Similar Messages

TS4062 I can't see videos I have taken on my ipad either in iCloud or when I sync my ipad to my macbookpro (both are up to date) I can only see photos? The videos are only few seconds long?

I can't see videos i have taken on my ipad in the iCloud all synced as i can see the still photos i have taken but not the videos. The videos are only a few seconds long. I have also tried syncing via USB cable from iPad to my Macbookpro and it wont sync either the photos or the videos in iTunes I have re checked the sync set up in itunes bt still nothing?
Any ideas would be appreciated
Thx
Laredo20

deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

I can't see the I can't see the radio tab on my misic, iPad 2, iOS 7

I can't see the radio tab on my misic, iPad 2, iOS 7

iRadio is only available in the USA at the moment.

I can not see my albums artwork only on my iPad

I can not see my albums artwork only on my iPad! What should I do?

Hello JChalups,
It sounds like your phone has calendars that your iPad no longer shows. First verify that the same calendars that are on your phone are stored in iCloud by checking the calendar at http://www.icloud.com. I would use the iOS troubleshooting section of the following article on your iPad. If not, then use it on your iPhone instead:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Regards,
Sterling

Windows 7 Pro can't see Internet IP's after recovery from having WGA invalidate OEM license

My Win 7 Pro receives an IP, can ping local IPs, can see right up to the internal router IP but cannot see the internet. Yes the network functions for other PCs.
Important historical data:
Some weeks ago my spare admin pc was rebooting after the usual monthly WAU when it failed to complete the last stages of installation of the updates (this would have been June 2014 updates.) Instead of booting normally to Windows, the system ran a bunch
of registry change attempts and then booted to a black Windows desktop that contained the dreaded "You're a filthy pirate" message that Microsoft so gently slaps onto newly discovered Winhacks. The trouble is my Gigabyte/AMD powered barebones box
was purchased, by ME, from TigerDirect.ca WITH an OEM Windows 7 Pro bundle. Now I should point out that I have suspected the Seagate Barracuda that was included with this machine as being a little off as the machine would occasionally freeze up or reboot itself.
Instead of putting up with this HDD any longer, I ghosted the fractured build off of the Seagate and onto a new WD Caviar Black. On first boot the system seemed to work but the "pirate" message was still there. I then attempted to go through the
recovery wizard and fix my license issue. The wizard failed and advised that the installation was corrupt and that I should reinstall. I reinstalled (not scratch installed) Windows and was rewarded by a successful install minus the activation. I proceeded
to phone the MS automated attendant and successfully activated my installation. I have a functioning network card but can only see LAN stuff. What the deuce? Gigabyte GA-M68MT-S2 with AMD Phenom II X6 1045T.

You can try this:
From administrative account, go to start, type cmd, press Ctrl+Shift+Enter. Click Yes, if UACD prompots. Now, type the following command and restart the PC:
netsh winsock reset
After restart, check internet connectivity.
Balaji Kundalam

Win 2k can't see internet via WPC54g

Trying to set up my friend's Thinkpad to access the internet wirelessly. Here's the config:
DSL cable modem/router with DHCP turned on ethernetted to Airport Extreme
Airport Extreme in bridge mode (doesn't act as a router)
I can access the internet wirelessly on the MacMini
I can access the internet wirelessly on the iBook
I cannot access the internet on the Win2k Thinkpad using the Linksys WPC54G 802.11g wireless card, although the laptop does see the Airport Extreme.
I can access the internet on the Thinkpad by connecting to the Airport Extreme via ethernet.
Please advise.

]I read your tech article, but how does that apply to Win2K (besides XP being built on the 2K kernel)?
Only Windows XP has native support for wireless networking.
Other versions of Windows do not have native support for wireless networking.
What this means is that, unlike Windows XP, you can not plug in a wireless adapter and expect Windows to recognise it and start working.
You will need to install some kind of software configuration utility that came with the adapter. Each manufacturer has their own software so as a result the process of using these utilities to connect a Windows (non-XP) computer to an Airport wireless network will be different and so no generic guide is available.
Having said that you may find the following information on things to watch for useful.
Accessing a Airport Network with a Windows 2000 PC or laptop
http://www.ifelix.co.uk/tech/1020.html

How can I see the whole screen on my original iPad, without having to scroll up or down. Something changed and I don't know how to get it back. I don't have a computer to hook it up to. Thx!

My front screen seems to zoom in when I start it now. AND, now I can not see the page fit the screen. It makes me scroll on the borders to move parts of the screen into view. Something changed and I don't know what happened or how to get it back to normal. Please HELP!!! Thx!

it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
or you can go into settings>general> assessability> zoom and turn it off.
hope this helps

Can't see forms anymore in adobe reader for iPad.

Until the update I was able to read this form. Can anyone see why I can't any more? uwo.ca/fhs/kin/ug/programs/guides/honors_bsc.pdf

Nevermind I solved my own problem. I can see there has already been alot of people viewing this question. So I'm going to post what I already posted as a discussion as a reply here.
I'm not a computer wize and very new to Adobe and creating forms with LiveCycle. So apologize to anyone that reads this and says "duh", but hopefully it will be helpful to someone out there who is struggling like I was.
First off - the IPad will will definitely be able to view your livecycle forms regardless of what anyone else says! These were my steps;
1. Create form in LiveCycle Designer.
2. When you save, select "save as"
3. When the dialogue box opens, and you are creating the name of what you are going to call your file, below you will see a drop down box labeled "Save As Type". Make sure you switch the file type to "Adobe Static PDF Form (*.pdf)"
And that's it!
Here is another tip for a user like me:)
I need to create a form to post to a website, where people fill it in and save it to their computers. I found that when I just saved the form straight from LiveCycle Designer and then posted, some of the free adobe versions (for PC's) wouldn't let the user fill it in. So this is what I did,
1. Follow the first 3 steps I listed above.
2. Next open Adobe (the full version) not the reader. I have Adobe X.
3. Got to "Save As". It will give you a bunch of options. Select "Reader Extended PDF" and then "Enable Additional Features"
Add that should be it!
One more tip for the average to low level user. We had some feedback that when someone open my form in the iPad app. they were not able to fill it in. They could, but what they didn't realize was they needed to select the icon at the top that is a little picture of a speech bubble and pencile.

Can't see shared printer with IOS 6 on ipad 3rd generation

I just upgraded my 3rd generation ipad to iOS 6.0 and now it won’t see the shared printers at my office. The printers are shared on a Mac mini server running OS X Server Lion 10.7.4. I can still see the shared printers and can print to them from a 3rd generation ipad with iOS 5.1.1.
Does anyone know what apple changed with iOS 6.0 that makes it where the shared printers aren’t showing up and what I might need to do to get them back working on my ipad with iOS 6.0?
Thanks -

iOS printing to a non-AirPrint printer is not supported. There's more information here: AirPrint 101
If you had iOS printing working through yout OS X Server then you must have had another piece of software running in the server emulating AirPrint. That software isn't compatible with iOS 6.

Can't see photos taken on iPhone on my iPad

I have done the setup for iCloud using the settings screens on my iPhone and iPad but can't see photos taken on one device on the other. What am I missing?

Check Settings>iCloud to be sure both devices are signed into the same iCloud account with photo stream enabled. Also, only photos taken after enabling photo stream are uploaded, not earlier photos. They are uploaded when the camera is closed, you are connected to wifi, and your device has at least 20% battery life remaining.

Can't see app that was purchased on my ipad 2

I purchased a free app and I can't see it on my ipad 2. I have synced it and have also removed it and then reinstalled it from my PC. During re-installation, I see it loading. After it is done installing, it vanishes. Can anyone help with this problem?
I was thinking about restoring the ipad to factory settings but am afaird on losing data from other apps since my son has sevral games apps which he is playing and have gone a long way. If I back it up and restore, will the data from the games be lost?
Thanks,

These are the general things that you can try to get your apps to work again. But the first thing you can try is to download any free app - that seems to reset something. See if your apps will work after that. If not try these things listed.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Close all apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If none of these things work, you may have to delete the app and install it again. To delete the app, tap and hold down on the app icon until it wiggles. Then tap the X that appears on the icon to delete it. Restart your iPad as described above and download the app again.

Can't see the App Store in my mini ipad?

I have noticed that I no longer see the App Store in my mini ipad. Is there a setting to bring it back on ipad?

Check your restrictions
Settings>General>Restrictions>Installing Apps

FCEHD- preview disabled, can't see any vid in Capture Now

Thanks in advance......
I am running G5 Quad and FCEHD. Installed correctly. Trying to hook my DV camcorder to capture vid. Camcorder has DV out (no straight firewire). From camcorder DV out, I go into ADS Tech A/V Link (recognized in Mac) to it's DV in. From A/V Link, I come firewire out into G5.
BUT.. when I start a project, I have tried every NTSC setting. Everything starts as it should ( I assume). I click on Capture to open capture window and it shows the colored bars and says "preview disabled". HUH??!?! Why is preview disabled? Am I supposed to be running a camera that has a firewire output on it, thus negating the need for this A/V Link??
I can click the spacebar and the camcorder playback starts to work, so there is some sort of sync there. Press again to stop and it stops properly. But I am not seeing any video. When I press the spacebar again, camcorder playback runs as it should. I then hit the Now button on the Capture window and a page comes up saying "waiting for sync". The it prompts that there is no video. HUH??!!! What am I missing or doing wrong??
Any help would be greatly appreciated. This looks like an awesome program but I can't tell if I CAN'T USE IT!!

It is a smaller output than the firwire, although it may technically be the same thing, they look completely different type plug looks-wise. So as i understand it, we are saying almost the same thing. Yep, you're right. MiniDV is the tape, sorry about that. But the connection coming out of my camcorder DOES NOT look like the firewire that plugs into theMac. Also, I have the input device which switches between analog and digital. It has : s-VHS in, composite (yellow RCA) in w/ l&r audio in, and the DV in- a small plug that does not look like the standard firewire, although it could be used for that. The back has s-VHS out, FIREWIRE Out, DV out, composite out. So I am familiar with the ins and outs and I have done this with other setups, very similar.
I have this input device under the assumption that I may not only be inputing my video but video from other sources as well and from other people as well.
Thanks for the input. And please forgive my ignorance.

Airport Extreme setup - can't see internet

Hi, newbe here. I've got a Lynksys ADSL Router (WAG160N) which has problems with wireless connection. After exhaustive efforts to troubleshoot i've finally given up and got an Airport Extreme. I want to use the Linksys as a basic modem by switching off the wireless transmission and just using an ethernet connection between the Linksys unit and the Apple Airport Extreme. In setting up the Airport Extreme it doesn't seem to see the internet connection from the Linksys Ethernet. I know the Linksys Ethernet works fine as when I connect either my mac or my Window's laptop to it they immediately see it and can connect to the internet with no problems. Why can't my Apple Airport Extreme see the internet connection? It doesn't even recognise that an ethernet cable is connected?
Thanks.

scotty72, welcome to the discussions!
I assume that you are using the same ethernet cable to connect from the Lynksys to the AirPort Extreme that you use when you test the connection using your laptops, is that correct? If not, then check your ethernet cable or try another.
I am not clear on whether you have already configured the AirPort Extreme and it will not connect to the Linksys or you have not configured it yet. Can you clarify on that?

WRT350N can't see internet

I may have bought the wrong product. The box and online info said it included a WAP and I wanted to be able to attach storage as well. I'll give detailed info so hopefully someone can get me straightened out.
I'm running a Windows Small Business Server 2003 SP2 network at home. The server connects to the internet via one NIC through HughesNet and to the rest of my wired network via another. All client computer internet traffic is routed through the server. Each user (wife and kids) has their own storage space on a RAID in the server that is mapped to reconnect when they log on from any client.
Using the default settings on the WRT350N gets me access to the internet from the clients, but the mapped drives won't reconnect. First online support tech wanted to change the router IP after disabling NAT in the Advanced Routing tab. After disabling it I lost all connectivity and the chat session. Reset the router and tried again.
Second chat session was done from a client PC connected to the wired network with another connected through the WRT350N so I wouldn't lose connection with the chat. This time I was asked to change the router IP and disable DHCP. After the changes I was told to reboot the router and my server. So much for a stable chat connection.
Current network configuration is as follows:
HughesNet appliance has a default IP of 192.168.0.1. It is connected to the server and has assigned 192.168.0.8 to the NIC. The server connects to the rest of the network through the second NIC to a multi-port switch. The server has assigned this NIC 192.168.16.2. Addresses from 192.168.16.0 to 192.168.16.9 are reserved by the server. Clients are assigned 192.168.16.10 to 192.168.16.254 by the server's DHCP. I have 3 UPS, 2 CD servers and a PDU assigned static IP addresses between 192.168.16.91 and 192.168.16.99. The WRT350N now has a static of 192.168.16.10.
With the latest settings I still can't get to the mapped drives either by the assigned letters or by typing the full URL for the server space. From a wireless PC, typing 192.168.16.2 takes me to the server's main page, and 192.168.0.1 gets me to the HughesNet appliance's status page, so I'm getting to and through the server and to the appliance. Any attempt to connect to a web site returns an error saying I'm not connected to the internet. I can see other computers connected to the wired ports on the WRT305N and the router itself. I can also access the router at 192.168.1.1. From a PC connected to the wired ports of the router, when I try to access anything other than the router's setup page, I get the not connected error. Using Windows Explorer to look at the entire network, I see the wired and wireless PC in my internal domain, and the router in another network identified as MSHOME.
Any direction would be greatly appreciated.

Update-
After looking at posts for other devices, I moved the connection to my wired LAN from the Internet port on the router to one of the LAN ports. I don't know if this is the correct fix or just a patch, but it seems to work. I'd still like to hear from someone with better technical knowledge to make sure I'm doing the right thing.

HT5457 I can't see Internet vides or Netflix on my IPad II

Similar Messages

Maybe you are looking for