HT5460 My 10.8 update installation is taking a lot of time. About an hour already. Is it normal and if it is not, what do i do?

I started to update my mountain lion today but it seems it is stuck at the last bit. I can see nothing else, so can't fiddle and do something myself.
Any help will be appreciated. Do i need to restart or shall i continue waiting? How much time does it normally take? Do i need to update RAM or something? I already have a 16GB RAM.
Model : Macbook Pro
Year : 2009

If I remember correctly, it took over an hour to 1+45 on our 2 computers, so I'd wait for awhile longer. It shouldn't be a RAM problem.

Similar Messages

Hello i have a problem that i was making update IOS7 for my i phone 5 it's taking a lot of time about 4 hours till now, i can't use my phone know, it's appere logo i tunes only, can't do eny thing else like shutdown

Hello i have a problem that i was making update IOS7 for my i phone 5 it's taking a lot of time about 4 hours till now, i can't use my phone know, it's appere logo i tunes only, can't do eny thing else like shutdown

Hey Andrew keriakous,
Thanks for the question. It sounds like your iPhone may be in recovery-mode. To resolve this issue, see the following:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

My ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

my ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

UPGPTHASH App Engine Post Installation is taking a lot of time

C:\pt852\bin\client\winx86>psae -CT ORACLE -CD PSFNP -CO VP1 -CP VP1 -R INSTALL -AI UPGPTHASH
PeopleTools 8.52.11 - Application Engine
Copyright (c) 1988-2012 Oracle and/or its affiliates.
All Rights Reserved
This is running for a long long time...Does it run that long?Almost an hr now .I am doing a fresh install of FSCM 9.1 FP2 on Tools 8.52.11 on Windows

mmaller0319 wrote:
"If you are installing either a PeopleSoft PeopleTools System Database or a database delivered on
PeopleSoft PeopleTools 8.52, and you are applying a required for install PeopleSoft PeopleTools patch, skip the
steps in this task"
In my case tools was 8.52 and so i did not have to run any relscripts?
Does this mean we skip entirely from 7-1-1 to 7-1-12?
What about the PPLTLS84CUR and PPLTLSCURDEL project?Dont we have to copy both of them and alter PPLTLS84CUR?
I have already copied PPLTLS84CUR followed by CURDEL and then altered PPLTLS84CUR?Will it have done any harm to the installation?All this is not required. If your db is running on PT8.52, skip the task 7-1 and go directly to 7-2. Do not copy and build projects.
If I was you, I would restart from scratch with a new db.
Nicolas.

After the latest iOS update (8.1.2) my battery drains in 4-5 hours, on standby (5S 16gb) - and I'm not the only one

Hello,
Since the latest update, my iPhone 5S's battery life has decreased significantly.
In the past, I've never ran into any issues. I have my 5S for over an year now.
Prior to the 8.1.2 update, a full battery lasted for about 24h (usage time >= 4h) to 50-60 hrs (on standby, no usage).
However, after updating, I can see my battery decrease in an alert mode ( about 2-3 % every 3-4 minutes, even on standby).
I've tried all the solutions possible, including but not limited to:
- downgrading to iOS 8.1.1 (I managed to do it, because Apple is still signing the IPSW files). - didn't work, no improvement
- restoring and updating again to 8.1.2 , starting from scratch (I've backed up all my stuff first, restored, updated, set iphone as 'new' , didn't put my data back on) - didn't work, no improvement
I've also chatted with the tech support today and they diagnosed my device, saying:
Quoting support operator:
"Good news, it seems that everything for the hardware side —WiFi, Cellular, and Battery is looking beautiful! That is awesome! Some of the software though does seem to be affecting some things I do see. So, we have found out what the cause is. Next step is getting it taken care of so it doesn’t continue. I want to make sure you don’t have to keep worrying about your battery life."
The only fix they offered was restoring and updating to the latest version, 8.1.2 , again. I've told them I've already tried it, but I thought to give it another try. Unsuccessful again, battery still draining quickly.
I've discussed with another operator about 7 hours later, describing my problem and also told them other users experience this issue too:
Iphone iOS 8.1.2 battery drain remains
No iOS 8 Battery Drain Problems Until iOS 8.1.2
These are only two topics I've found on apple support forums, but many others are experiencing this too.
The technical support employee told me that Apple didn't yet discover this bug and if they do (on a large scale) they will issue an update, or a fix.
That's why I ask you all who have this issue to come and post here, to let Apple know we want our devices to work normally again.
I can't use my iphone if, it drains 100% of battery in 5-6 hours without abnormal usage time!! I also don't think it's healthy for the battery to recharge it 2-3 times a day.
Something needs to be done. I regret every day my decision to update to this version of iOS . I will never update again prior to reading other users' experince on the update.
Please, Apple, do something!
Oh, and by the way, I would go to a service to have this looked into by a specialist, but in my country (and I'm sure there are other countries too) there aren't any Apple services , only shops. And I can't risk taking my phone to a local GSM repair shop, I don't trust them.
Hoping for the best,
Eduard-Cristian D. - Romania

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

Generic Extraction : Taking a lot of time

HI Experts
I have created ZKONV a generic extracter which is a copy of KONV table. It has around 16,00,000 records .When I´m pulling the data in to ODS it is taking a lot of time. it is taking around 5+ hours to load the data. Is there anything wrong with my Datasource why it is taking so much of time.
Kindly provide some inputs
Thanks
NLN

Hi Lakshminarayana
You got to check couple of things.
First goto the source system and see, how long the extract program is running. The long time may be due to poor source system performance or huge processing at the BW system side. If the job in the source system is running for a long time, then check the source system resource. Build proper index on the mentioned table and see whether it has improved the performance. You can ask the basis people for the SQL trace and they let u know what kindof indexes u can build on the tables.
If the processing is taking more time, then u have to imrpove the start/update routine in the BW side. Please let us know, where exactly u have the problem. Then we can think of resolving it.
Sriram

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.

I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.

I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopeless

If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

Simple select query is taking a lot of time

hi gems...
my table has 7267563 rows...and i am doing a simple select * from table;
but it is taking a lot of time nearly 25minutes but not completed...
when i did select count(1) from table then it gave the result instantly also select * from table where rownum < 10 is also fine...even when i am selecting all the records using rownum i.e. select * from table where rownum < 7267563 is also giving result instantly...
but the entire table is not getting result i.e. select * from table...also there is no lock in the table(though i know that select is nothing to do with lock)..
what may be the issue..please suggest...thanks in advance...
Edited by: user12780416 on Dec 12, 2011 11:08 PM

Hi;
Please see below thread
query takes too long ...
help in solving long run query
HOW TO: Post a SQL statement tuning request - template posting
Hope it helps
Regard
Helios

Startup taking a LOT of Time

Hi All,
We have our application on Weblogic Server 8.1 SP5 and its taking a lot of time while starting up.
What I found that these lines are the ones which are taking up majority of the time.
Kindly Suggest how we can improve on this.
####<Jun 15, 2009 4:14:59 PM GMT+05:30> <Info> <Deployer> <sunbom4> <cgServer> <main> <<WLS Kernel>> <> <BEA-149060> <Module uddi of application uddi successfully transitioned from unprepared to prepared on server cgServer.>
This line took more than 2 min.
####<Jun 15, 2009 4:16:50 PM GMT+05:30> <Info> <Deployer> <sunbom4> <cgServer> <main> <<WLS Kernel>> <> <BEA-149060> <Module MLAppCoreWL610.jar of application IntellectMM successfully transitioned from unprepared to prepared on server cgServer.>
####<Jun 15, 2009 4:18:23 PM GMT+05:30> <Info> <Deployer> <sunbom4> <cgServer> <main> <<WLS Kernel>> <> <BEA-149060> <Module OpenFXWrapperEJB.jar of application IntellectMM successfully transitioned from unprepared to prepared on server cgServer.>
The above 2 lines are taking 1.5min each.

I suggest that you take some thread dumps 10-15 secs apart during the time it's slow. The log timing alone won't tell you where the threads are spending time.

Mac taking a lot more time

My Mac is taking a lot more time to load photos from iPhone and iPad than was taking before.What can be the reason of it ?
Thanks

DO NOT INSTALL MACKEEPER or any other so called 'cleaning ' application. Please read the following user tip:
https://discussions.apple.com/docs/DOC-3036
Look for reasons in this user tip for your issues of slow operation:
https://discussions.apple.com/docs/DOC-3521
Ciao.

Select Command taking a lot of time to execute

Dear Experts,
My below SELECT command taking a lot of time to execute.
      SELECT wid
                   matl_desc
                   INTO TABLE open_wid FROM zwb_table
                   WHERE ( weight2 = 0 OR weight2 IS NULL ).
Table : zwb_table contains around 7 Lacs records. That's why taking a lot of time . I have also Indexed the table zwb_table with field WID & WEIGHT2 . (zwb_table contains only WID as Primary Key Field)
Structure of Internal Table : open_wid ->
                                         wid LIKE zwb_table-wid,
                                         matl_desc LIKE zwb_table-matl_desc,
Please suggest me how to Improve the Performance of the above Select command.
Thanks in Advance
JACK

Hi Jack,
you are having morethan 7lack records in z table. it is not good practice fetching all the records into internal table and restricting with where clause in loop statement.
I hope you already created secondary index combination of primary key.
check you select query fetching records based on index you have created in ST05.
Refer below link for your program is using index that you have created.
Re: Indexing
Regards,
Peranandam
Edited by: peranandam chinnathambi on Apr 7, 2009 8:38 AM

Can we optimize the query : It is taking a lot of time

the following query is taking a lot of time ...
Can anyone suggest to make it run faster ???
table B has 12 million records
table a has 10000 records
CREATE TABLE less_time
     PARALLEL
     NOLOGGING
     AS
     SELECT a.user_id,a.mp_id, COUNT(product_id) product _count
     FROM table a,table b
     WHERE TRUNC(a.call_time) < TRUNC(SYSDATE) - 1
     AND a.history_id = b.call_id
     AND b.product_type = 1
     AND b..product_status= 50
     AND user_id IS NOT NULL
     GROUP BY user_id,mp_id;

analyze index indx_mtx compute statistics
thanks for explaining David ...
Actually I somewhat bettered it
i made a consolidated index on table b
like create index indx_ty on table b (call_id,mp_id,user_id,b.product_type,product_status)
now the explain plan shows that the query is much much faster also i did one trick in the query
SELECT a.user_id,a.mp_id, COUNT(product_id) product _count
i changed to SELECT a.user_id,a.mp_id, COUNT(1) product _count
to enable it to do FFS
thanks anyways ....

My Ideapad N581 is taking a lot of time to start up ....Can experts help?

My laptop is taking a lot of time to start up.It just shows the Lenovo screen and stops there.What could be the problem?
Thanksin advance.

hi mamuninayak,
The system might be experiencing a boot or a POST issue.
- Remove all USB devices.
- Remove the AC adapter and battery then held down the power button for 15 sec.
Reconnect just the AC and try.
-See if BIOS can be reset.
Start hiting F2 when while powering the system on.
If succesfull in booting into BIOS. Hit F9 the F10
Try Removing the Harddrive and turn the system on, See if there will be any changes.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My iPad is taking a lot of time to factory reset..What should I do?

Hello,
I am currently factory resetting my iPad , but i forgot to do it using my pc , so I did it without using iTunes , I did it using the option in the iPad's settings but it is taking a lot of time , so far it has been 2 hours ... What should I do if it takes more than 5 hours or so?
Thanks in advance,

hi mamuninayak,
The system might be experiencing a boot or a POST issue.
- Remove all USB devices.
- Remove the AC adapter and battery then held down the power button for 15 sec.
Reconnect just the AC and try.
-See if BIOS can be reset.
Start hiting F2 when while powering the system on.
If succesfull in booting into BIOS. Hit F9 the F10
Try Removing the Harddrive and turn the system on, See if there will be any changes.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT5460 My 10.8 update installation is taking a lot of time. About an hour already. Is it normal and if it is not, what do i do?

Similar Messages

Maybe you are looking for