HT5463 Does alarm work with do not disturb??

Does alarm work with do not disturb??

https://discussions.apple.com/message/21256836#21256836
From the More Like This section on the right

Similar Messages

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?

With "Do Not Disturb" active, why does the iPhone beep when plug in for recharge?
I usually go to bed after my wife. I have the Do Not Disturb set for 11 pm to 7 am, and I can see the moon symbol.
So why when I go to bed at midnight and plug in my iPhone to recharge do I get a LOUD BEEP?
My wife is banning my phone from being next to my bed and an alarm clock.
To me it seems that the "Do Not Disturb" should turn this beep into a vibrate.

section2i:
If that is true, then you should file that as a bug using the link above:
If I am reading what you are saying correctly, you are saying that when vibrate is 'off', and you turn on the phone and plug it in that a vibration occurs, and that it is not respecting the vibrate 'off'.
That would be a slightly different issue from what I am asking about (Do Not Disturb), and would probably need a separate bug report.

I have an iphone 4s with ios7. Does it work with 4g? If not what i can do to upgrade it?

I have an iphone 4s with ios7. Does it work with 4g? If not what i can do to upgrade it?

The version of iOS is irrelevant to 4G connectivity.
The iPhone 4S supports HSPA which is considered 4G by some carriers, it is NOT an LTE capable device.
If you want a device that supports LTE, you will need to upgrade to an iPhone 5 or newer. LTE capability requires hardware that does not exist in the 4S or older iPhones.

HT4759 Does iCloud work with Windows 8? If not, when is it anticipated to be added?

Does iCloud work with Windows 8? If not, when is it anticipated that it will? I want to sinc Microsoft Outlook between my computer and SmartPhone.

iCloud is not currently supported on Win 8, some have got it to work but many have not, I would wait until it is supported.

Does Streams work with CLOB or not

Hi,
Reading the documentation it tells me streams works with CLOB's. So I tried it out and it failed with an unsupported datatype error. I'm using a standard charset (WE8ISO8859P15). So does it work with this charset or not???? (well in may case not :-) It's not really clear to me what charsets are supported.
Thanks,
Steve.

Did you try to replicate whole table with CLOB column in it? It should works..

Apple A/V adapter does't work with SONY TV

I connected my iPad 2 to a newer SONY TV using Apple's A/V 30 pin connector via HDMI and the TV does not see a signal.

Did it work before? Does it work with a different TV/projector? Did it work with ios 7.x?
Anyway, with the introduction of ios 8.x, apple stopped supporting older a/v cables. You need to get the latest a/v cable with the correct firmware. There is a little chip in the a/v cable.
go to the apple store. Buy a new cable. Verify the cable works in the store.
Robert

Does it work with windows xp

does it work with windows xp

Another consideration for you now is that MS has officially dropped support for XP. You will get no more secirity patches or stability patches.
I am not telling you that you must abandon XP, just reporting a fact.
Good luck with your issue.

Does SIRI work with Ipad 3

Does Siri work with Ipad 3

Apple Support Communities Terms of Use
2. Submissions
Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products.
Discussions of Apple policies or procedures or speculation on Apple decisions.

Power Sim - Does it work with Integrated Planning (IP)

PowerSim currently promotes itself as being able to perform superior simulations on SEM-BPS. With BI7.0, we have the option of using Integrated Planning (IP) or BW-BPS. Following are my questions:
     1. Does PowerSim work with IP?
     2. Does PowerSim work with BW-BPS in addition to SEM-BPS? Assuming yes, what are the differences / challenges (if any) using BW-BPS in a BI7.0 as opposed to going against SEM-BPS?
     3. Does BI7 have any "out of the box" advanced simulation capabilities that are "close" to what PowerSim provides.
     4. Given SAP's recent strategic investments of Outlook Soft / Pilot / Acorn, the assumption is that these will integrate into the BI platform over the next year +. Does anybody know if any of these tools provide similar simulation capabilities to PowerSim and/or what SAP's timing is to integrate / ramp-up?
Thanks

Hi Richard,
1) Unlike in previous versions of SEM-BPS. there's no special support for PowerSim in BI-IP. Please check with PowerSim vendor what kind of standard SAP interfaces they support (to read from/write data to BI).
2) Yes, when it comes to PowerSime BW-BPS is no different to SEM-BPS. You cna use BW-BPS just like SEM-BPS (some limitations are the financial planning functions). For more information please see the BI FAQ at http://service.sap.com/bifaq.
3) No.
4) No. PowerSim provides specialized capabilities which are not included in that form in the products listed by you. Please check with PowerSim what capabilities they provide in connection with SAP NetWeaver BI 7.0
Regards,
Marc
SAP NetWeaver RIG

Dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

dm4-1060us laptop SD Card Reader 5-in-1 question. Does it work with SDHC and SDXC memory cards?

This cart reader is a kind of multi card reader and you can use different cards with it. In my opinion every multi device should be used very, but very gently. I do not know what happened exactly in your case but maybe you have damaged something inside.
Try to restart your notebook and use other SD card to check if everything works well. Please do it very gently and if you see something is wrong stop with inserting the card.
I use 1 GB SD card on my A200 without any problems.
In my opinion you should check notebook by technician.
Bye and good luck!

Lightroom : does it work with 2 intern HD's in mirror

Lightroom : does it work with 2 intern data HD's in mirror with the name for exemple H:\                 Because Windows see dis 2 intern HD's as 1 volume(1 piece)
and Lightroom is standard installed on C:\ Programfiles\Adobe\Adobe Photoshop Lightroom ..
and the libary is standard placet in on   C:\ Documents and Settings\Jan\My documents\ my pictures(mijn afbeeldingen)\Lightroom\ Lightroom ... Catalog.lrcat
                                                                                                                                                                                          \ Backups LTR...
                                                                                                                                                                                             \Lightroom .. Catalog Previews.lrdata
Note: "Jan" is not my real first name

I assume you mean if you can use an internal hard disk in mirrored RAID setup?
Yes, you can, but LR will see only one of the RAID disks. Otherwise you would have redundant images in your catalog. If one disk fails, you would update the folder location to the other RAID disk.
Provided the RAID controller still works....
I had this desaster once when the RAID controller died together with one disk. It was hell of an effort to get the remaining disk readable, because it insists on its RAID controller.
So do not mistake this setup as your only backup solution.
Cornelia

Does 'versions' work with microsoft word, ppt and excel or just pages, keynote and numbers?

Does 'versions' work with microsoft word, ppt and excel or just pages, keynote and numbers? I tried to do what the videos say but the little icon for versions is not there on word. Does this mean it only works for pages etc... or do i have to activate it somehow? If it is only for pages then this ***** and should be better advertised!!!

Each application will need to be updated to work with Versions, Full Screen, and other Lion-specific features.

Does Kuler work with Illustrator CS3

Does Kuler work with Illustrator CS3? I have been trying to up load Kuler colors into Illustrator CS3, but this message comes up.
Any suggestions?

I’m afraid not, only CS5 and later

Will BlazeDS work with Flash (not Flex or AIR)?

Does anyone know if Blaze can work with Flash(not flex or AIR)?
If so, how? Any examples?
Thanks,
James

Hallo Russell, I'm a beginner with Flex and Flash, and I already succeeded calling the remote object with Flex. But my company requires me to use Flash (AS3). So, could you please give me an example of ActionScript code to call a RemoteObject in BlazeDs? The url? and call string? I also use Spring behind. I tried to use the url: "http://localhost:8080/myAppName" and then the call string is "myService.getList" myService is the destination in the service-config.xml getList is the method from the remote object which is a Java class. Here is the snippet from remoting-config <destination id="clasificationService"> <properties> <factory>spring</factory> <source>clasificationManager</source> </properties> </destination> and Here is the snippet from services-config:  <factories> <factory id="spring" class="com.airbus.cm.cd.controller.SpringFactory" /> </factories> <channels> <channel-definition id="channel-amf" class="mx.messaging.channels.AMFChannel"> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf" class="flex.messaging.endpoints.AMFEndpoint" /> <properties> <polling-enabled>false</polling-enabled> </properties> </channel-definition> <channel-definition id="my-secure-amf" class="mx.messaging.channels.SecureAMFChannel"> <endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/> <properties> <add-no-cache-headers>false</add-no-cache-headers> </properties> </channel-definition> <channel-definition id="my-polling-amf" class="mx.messaging.channels.AMFChannel"> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/> <properties> <polling-enabled>true</polling-enabled> <polling-interval-seconds>4</polling-interval-seconds> </properties> </channel-definition> </channels> Best regards, Raymond.

HT5463 Does alarm work with do not disturb??

Similar Messages

Maybe you are looking for