HT5463 has anyone enabled do not disturb setting and it works? i have two 4s and both still ring in mode

has anyone enabled do not disturb setting and it works? i have two 4s and both still ring in mode

Is your screen locked when this happens? Do Not Disturb only functions when the screen is locked.
See here for a description of how Do not Disturb works: http://support.apple.com/kb/HT5463?viewlocale=en_US&locale=en_US

Similar Messages

  • My ipad will connect to the router but will not connect to my network. I have two PC's both will connect to the network. Last night I connected my ipad as a remote for my Apple TV, after that i could not connect to the internet, don't know it that caused

    My

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
     Cheers, Tom

  • HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

    Do Not Disturb and Notifications
    Push notifications appear in Notification Center and alert you to new information, even when the
    associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
    a numbered badge on the app icon on the Home screen.
    Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
    iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
    following options in Settings > Notifications > Do Not Disturb:
    • Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
    want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
    • Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
    to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
    from your Favorites list or other Contacts groups you define. For information about Favorites,
    see Chapter 25, Contacts, on page 100.
    • Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
    their Caller ID) calls you twice within three minutes, iPhone will ring.
    Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
    turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

  • Has anyone enabled time machine using a linksys router and external hard drive? And if so how?

    Has anyone enabled time machine using a link sys router and external hard drive? And if so how?  I have a Linksys E4200 wireless router with a usb port on it.  I also have a Western Digital Elements 1TB external hard drive.  I would like to be able to use this hard drive with time machine.  Has anyone done so and if so how can I do so?

    You might get some responses, but we don't see many Linksys users on an Apple forum so it may be awhile before you see an answer.
    It might be useful to point out that Apple does not even support Time Machine backups to the USB port on their own AirPort Extreme wireless router, so we may be heading down a very slippery slope here.
    I've tried Time Machine backups on an AirPort Extreme router a number of times in the past. It's just not reliable. Works for awhile, then has corruption problems. Or has corruption issues immediately. I once went a month or so and thought I had it nailed, then got smacked with a corrupted set of backups again.
    But, I guess you never know. It might work on the Linksys. If you decide to try this, I would suggest that you have another backup plan in place for your important data.
    Hope that some Linksys users will respond so we can all learn.

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • Do not disturb setting in Curve 8520

    Hi I am using Curve 8520. My device software version is 5.0.0822(1385).
    I want to use do not disturb setting but its not showing in my active profile. I am using normal profile..
    Can anybody tel me solution on it. I want Do Not Disturb Setting in my profile.... How to get it?????

    Hi bhupesh1503,
    Welcome to BlackBerry support community forum.
    The feature 'Do Not Disturb' is available in OS 4.5 only. This feature is not carrierd forward in other OS releases by RIM.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Old school, has anyone here been able to install and run Logic Pro 9.1   on a dual 1.8 G5 PPC? I know LP9 is not officialy supported on non Intel CPUs, But  9.0.0 and 9. 02 are ok on the G5 PPC as it is universal Binary, while I hear 9.1 wont work

    has anyone here been able to install and run Logic Pro 9.1   on a dual 1.8 G5 PPC? I know LP9 is not officialy supported on non Intel CPUs, But  9.0.0 and
    9. 02 are ok on the G5 PPC as it is universal Binary, while I hear 9.1 wont work.

    ok thanks, that's what I tought,looks like apple machines are only good for two - three years, the software developers are ahead of the hardware to a certain point, love macs but this is forcing us to buy new macs just to keep  up with development. There was a time it was the opposite.
    By the time we get up on new stuff it's time to change again. Gotta be rich to deal with macs ...LOL

  • Has anyone enabled Subversion through http with Lion Server?

    The method for enabling subversion with Leopard no longer works.
    Has anyone enabled Subversion under Lion Server?
    If so, please post a process or a link to one.  Thanks.

    You need to create the repository with 'svnadmin create'.  The PATH_TO_REPO in the example above equates to the path REPOS_PATH below.
    From a console:
    svnadmin help create
    create: usage: svnadmin create REPOS_PATH
    Create a new, empty repository at REPOS_PATH.
    Valid options:
      --bdb-txn-nosync         : disable fsync at transaction commit [Berkeley DB]
      --bdb-log-keep           : disable automatic log file removal [Berkeley DB]
      --config-dir ARG         : read user configuration files from directory ARG
      --fs-type ARG            : type of repository: 'fsfs' (default) or 'bdb'
      --pre-1.4-compatible     : use format compatible with Subversion versions
                                 earlier than 1.4
      --pre-1.5-compatible     : use format compatible with Subversion versions
                                 earlier than 1.5
      --pre-1.6-compatible     : use format compatible with Subversion versions
                                 earlier than 1.6

  • HT1414 My ipad is non responsive to touch.  I have tried updated the software and restoring the device to factory setting and it still does not respond.

    My ipad2 is non responsive to touch.  I have updated the software using ITunes and have restored the device to factory setting and it still does not resonse.  Has anyone had this problem?  What do you suggest? 

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Has anyone actually got the Green Screen feature to work?

    Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

    After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
    Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

  • Has anyone managed to make the Canon 8000F Scanner work on this system?

    has anyone managed to make the Canon 8000F Scanner work on this OX system?

    Part of the problem is that this is probably not a "logical" error.  The common cause of this issue is still image files where the pixel size is too large. This suggests that Encore's (and other Adobe apps) ability to handle image size is exceeded without a better error message. The link, which I'm going to post until I find a "new" location (if one exists) is now a bad link:
    http://helpx.adobe.com/encore/kb/error-software-used-decode-media.html
    And in this example where it was not an image issue, the user fixed the problem by re-encoding the problem file.
    http://forums.adobe.com/message/6004428#6004428

  • Has anyone experienced 4G in Spokane Wa., and if so, how would you describe your experience?

    Has anyone experienced 4G in Spokane Wa., and if so, how would you describe your experience?

    Tina,
    There's been a change in behaviour with FM11's Find/Change (as you've noticed). The dialog now retains focus after a search has been performed and is modal. However, the focus of the field for ctrl-F should place it in the Text area, regardless of platform, not execute the last operation. This is buggy behaviour and I just confirmed this on my platform (regardless of whether your in Doc A or B).
    Please file a bug report at the FrameMaker Bugs & Wish List  (https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=63)

  • Has anyone heard of "UTH Computers" scamming and taking over control of your computer?

    Has anyone heard of "UTH Computers" scamming and calling you and then taking over your computer?
    Sorry, I don't know where else to post this question…...

    What damage do you think they did?
    If you gave them your credit card number, call your bank and explain what happened.
    Then have them issue a new credit card number and never give it out again.
    Did you give them your login credentials?  If so, changed your password now!
    Did some kind of software get installed on your Mac (not possible unless you authorized it)?

  • Has anyone got the QT stand alone installer to work?

    OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
    You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
    and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
    Mark

    I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

  • Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

    Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
    Has it returned to normal for you?

Maybe you are looking for