HT5463 my phone log also shows the call that made it through only called once...shouldn't it have shown twice?

iphone 5 issue with DO NOT DISTURB feature. Feature is ON, allowing FAVORITES to be able to call, I RECEIVED A TELEMARKETING CALL THAT BYPASSED THE SETTING as my phone log only shows they called once and the phone rang and I answered. Shouldn't the phone log show they called twice? Otherwise I have to consider this another failure by Iphone 5.

Here's an update. I just did the Disk Utility tests, of basically all the elements that appear on the left of the window (3 available selections), including the Macintosh HD one. They all passed the verifying and repairing processes, no warnings or errors whatsoever. Yay. The point is, yesterday I was looking at my photos from the Finder. I wasn't doing anything at all, really, not even moving the cursor, when I suddenly heard the HDD making the working-noise without stopping, just that constant scratchy noise. This went for something like 7 seconds straight, and at the very next moment, it started making a consecutive and tempoed stream of this same sound, but a little bit less intense, with interlapses of about a sec. This continued for about a whole minute. I'd like to know if things are really fine.
As I previously described, the guys at iShop almost don't want me there anymore, or at least that's what their distanced attitudes get my into thinking. I visited the place some days ago, to look at the new iPod Touch pretty quickly, and I clearly felt that the guards were watching me closely, you know, with a hostile mannerism, the kind of stance that you use, with arms folded, to look kind of intimidating. I really didn't do anything to deserve that paranoic and ridiculous behavior. What happened was, a bit hottened discusion with the manager, when I was telling him I needed a replacement, and he really wasn't giving me an empathetic and understanding attitude.
If a call to Apple Support is required soon, and my computer needs to be repaired or the HDD replaced, they'll most likely send me there, since it's the most prominent place of recommendation. Sincerely speaking, they do seem like the most prepared personel, and they aren't great per se. If that is so, I really, really hope that the hard drive is the only part or detail that needs some technical considering, and deserves my stress.
Thanks for your consideration, so far so good.

Similar Messages

I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

You will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to your computer (that will copy PDFs and epubs that are in the iBooks app, not just actual ibooks), and you can then sync them to your iPhone. Or you might be able to open each PDF in iBooks on your iPad and use the share icon to email them to yourself and then use 'open in' in the Mail app on your iPhone to copy them to its iBooks app (if the PDF is protected then you may not get the email option via the share icon).
The Settings > iBooks > Sync Collections setting doesn't copy items between devices, it just means that it a bookor PDF is on both devices and you move it into a collection on one device then it will be moved into the same collection on the other device

HT4972 i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE.

Forwarding my unanswered calls to my mobile showing the E1 no on my mobile while i want to showing the caller mobile ID.

hi guys,
if i have a coming call from mobile to my extension and i forwarding my unanswered calls to my mobile showing the E1 no on my mobile while i want to showing the caller mobile ID.
is the ""gateway Calling Party Selection* Originator"" configuration on cucm will solve it or no

Hi,
Setting the Calling Party Selection to Originator will send the Original Calling party number to your provider. If your provider accepts any calling number, it is well and good.
you may also need to enable the other setting 'Redirecting Number Delivery Outbound' and Redirecting Party Transformation CSS to ensure the IP phone's number is sent to provider as a Redirecting number along with the original calling number and final called number.
Please collect 'debug isdn q931' for a test call to verify how these numbers are sent to provider.
Thanks
Suresh
Please rate all the helpful posts

Can i configure my phone to not show the time or d...

Hello,
I was trying to clear my home screen because the time displaying on it its sooo big and date as well. i like it clear but i couldnot find any option to hide the time and clock from display..
another question...
is there any option to show the time in call that how long this call has been...
becuase sometimes we need to know how long your call is going on so you can disconnect or may continue talking but there is no option in this phone...
Thankyou

Hello,
Based on ur questions, i suggest you check the following things:
1> To hide date and time in standby mode: Menu > Settings > Date and Time > Date and Time format > Date > Date on standby scr. > Hide date
2> Call duration shown: basicly, your phone only supports "Summary after call" to show the call duration. However, I will show you one tip and i hope it works on ur phone: during the call > press Menu > select Log > select Call Duration > you will see Active Call Duration (that's the call you are talking)
Cheers

HT4623 My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,

My ios update keeps getting stuck on the Restoring iPhone software stage. I uninstalled iTunes and reinstalled it again, but still nothing. Now I can't even use my phone as it shows the plug into iTunes screen. Please help!!!! Thanks,

A Restore first downloads a new copy of iOS to your computer. On a slow Internet connection this can take a long time. How fast is your connection? How long would you expect it to take to download 900 MB?
That's assuming nothing is interfering with the download. Some firewalls and antivirus programs will block the download or slow it down. So you should temporarily disable your security software. Security software can also block the update after the iOS download is complete.

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

I was updating my 3GS on iTunes and my phone has froze, showing the apple symbol, what can I do?

I was updating my 3GS on iTunes and my phone has frozen, showing the apple symbol only, what can I do about this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have this problem as well. The screen is black . i can.t get it to respond.Power home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn'

The screen is black . i can.t get it to respond.Power + home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn't ring/screen did not light up. Its a iphone 4. Any ideas how to fix this?

If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

Problem with setting up new Ipad Air2:I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with thesame

I can't set up my new Ipad using new Apple ID and it keeps showing the notification that wrong email or password and try again. I can log in Itune with the same ID. Please help me if you have come across the same issue. Thank you!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Why does my phone no longer show who calls me?

Up until about two months ago my phone was fine. (I've had it for a few months) But recently, my phone won't show who called me, contacts or not. Two people will show up but no one else will show up. I don't know how to fix this or if I just have to deal with it.

Let's bring all caller IDs back to your phone! What's your phone model?
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

I recently changed my email address at the online iTunes website. Now I can't update my apps because the log-in shows the old email address, but won't accept the old password.

I recently changed my email address at the online iTunes website. Now I can't update my apps because the log-in shows the old email address, but won't accept the old password. How do I fix this?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

My iPhone 5, periodically,will not show the call waiting number. It beeps but will not give me the option to swicth over or show me who is calling. The call doesn't appear in my "recents" either.

My iPhone 5, periodically,will not show the call waiting number. It beeps but will not give me the option to switch over or show me who is calling. The call doesn't appear in my "recents" either.

We appreciate your feedback on this matter, gingerspice913. I've not come across this issue before. Do you know how long it has been since the issue began? Please try to reset the network settings to see if it helps http://vz.to/1swAJbD?
TamaraH_VZW
Follow us on Twitter @VZWSupport

Phone keeps ringing on the caller's end - Is This a Call Waiting and Flash Button Problem?

I had FIos phone service installed 2 weeks ago. I am having a sporadic but regularly occurring issue with incoming calls that I think might be related to the Call Waiting and flash button so I am looking for some input. Before describing the issue here are a couple of things to know:
- I have my Verizon voice mail service turned off on my account.
- I have the call waiting function set to off.
- On my phone handset the Talk and Flash operation is the same button.
Now here is my issue. Often but not 100% of the time people are telling me that the phone just rings and rings on their end. After receiving many complaints since my Fios install that the phone rings and my phone answering machine does not pick up the call I have been calling my home phone number with my cell phone and I have determined the following:
1. My home answering machine will pick up the call, however on my cell phone which is the calling end the phone is still just ringing.
2. Sometimes I will press the talk button but there will be dead air but on my cell phone which is the calling end it will still be ringing.. But if I press the Talk/Flash button a couple of times the call completes.
Since my Talk and Flash button are the same I started to wonder if that is a factor so I repeated scenarios above and found that after pressing the Talk button a couple of times then the call is answered and the phone stops ringing on the caller's end.
I know that with Call Waiting the caller's end will just keep ringing unless the called end switches over with the Flash button. So my question is even though I have the Call Waiting function turned off could the combination Talk/Flash button be the reason why the call just rings on the caller's end even though I have Call Waiting turned off? And f this is the cause then why is it happening and does it mean that I have to buy a new phone that has separate Talk and Flash buttons?
I hope the above description of my problem makes sense and can be answered. Thank you

Without buying a new phone you can test this. Unplug the phone that has the combination button. If its a cordless phone base station with multiple handsets, make sure you unplug those as well. Then use a regular phone plugged in to do test calls (if you dont have one you could maybe borrow one for a couple minutes from a friend, family, or neighbor).
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

TS2774 hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistic

hi i have done the settings that mentioned in apple support threads but it wont work for me i am using BSNL cellone SIM and activated 3G too but unfortunately internet is not connecting but my facebook is updated and also showing the data statistics

They are not a supported carrier. You'll have to take it up with them.

HT5463 my phone log also shows the call that made it through only called once...shouldn't it have shown twice?

Similar Messages

Maybe you are looking for