HT5484 Does it mean the 3rd-party iOS developers can use the fonts listed in 'Additional Information' of this page for free?

On the page ‘iOS 6: font list’, there's an Additional Information section, listing a series of fonts _not_ pre-installaed in iOS 6. It also says that ‘Apps can also install the following fonts as necessary.’ Does it mean that Apple has already paid for the licenses of these fonts, and they allow 3rd-party usage for free? (I.e., may I bundle these fonts to my iOS app?)
Thanks.

Anything you have access to through the iOS SDK should be licensed for use in your apps, but you can contact the developer program support:
https://developer.apple.com/contact/submit.php
or software licensing:
[email protected]
and confirm.
Regards.

Similar Messages

  • IPhone 6 T-Mobile Contract free, does that mean its unlocked? And I can use it worldwide?

    HI there,
    IPhone 6 T-Mobile Contract free, does that mean its unlocked? And I can use it worldwide?
    please advise me?

    As long as you do not activate the phone with the T-Mobile sim card initially and just use the sim card you want, then the phone should remain unlocked.
    These were exactly the same questions asked when the iPhone 5s was released - if you want the phone to be unlocked then purchase the sim free T-Mobile phone, but DON'T activate it with the T-Mobile sim card.  If you do activate it with the T-Mobile sim, then the phone will be locked to T-Mobile, but if you activate it with another sim card, then it should remain unlocked.
    The problem with sim free is that it normally locks to the first sim card that you put in the phone and if you activate it with the T-Mobile sim, then it will, so don't use that, but the sim card that you want instead.
    Other than that, it normally takes about 6 months after the initial release date before Apple starts selling unlocked phones.

  • HT201596 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive. ALL my files are on the 4TB. How do i get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes   THX  .

    Hi,  80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes   THX  .

    Select the desired location in preferences, then consolidate the media files to it.
    iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed.  It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

  • I won Lightroom 1.0 a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
    Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
    Ken

  • The new itunes overfills my window. When I try to move it to the left so that I can use the slide bar on the right, part  of the left side of screen is not visible. How can I fix this, please.

    The new itunes overfills the window on my desktop ( windows 7). When I move it to the left so that I can access the slidebar on the right, part of the left side of the screen then disappears. How do I correct this?

    The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
    The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
    trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
    Back to how to re-link any de-linked tracks .
    There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
    at Dougs Scripts, there is one called iTunes Track CPR that might work
    http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
    or, if you just want a list of de-linked tracks, go to
    http://dougscripts.com/itunes/
    and find the script called List MIA's, this will create a text file listing all de-linked tracks
    if you review the thread at
    https://discussions.apple.com/thread/3633708
    also the thread at
    https://discussions.apple.com/message/17513078#17513078
    you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
    Good luck.

  • How do I disable the blocking mode so I can use the apps I want to install.

    I want to disable permanantly this stupid blocking firefox does when I want to install or upgrade an app, particularly Java. It is my decision what goes on my computer not firefox. I was going to go to another browser when a person from firefox on facebook said I could disable it but didnt tell me how. So I want to know how to so I can disable it for good or I shall have to find another browser. Security or not its my choice what I put on my computer and I wont be dictated to about what I can or cannot have on my computer.

    hello Jenna9, i'm not aware that there is any blocking built-into firefox when you're updating java (quite on the opposite, users are encouraged to keep their plugins up to date). could you provide the exact wording of the blocking notification that you are seeing or provide a [[How do I create a screenshot of my problem?|screenshot]]?

  • What will i do the white circle (where you can use the screenshot) is missing??

    WHat will i do on my ipad the circle is missing the white circle answers please.....        

    Settings > General > Accessibility > Assistive Touch > On
    This may also help... http://appleinsider.com/articles/11/07/11/inside_apples_ios_5_assistive_touch_al lows_accessible_gesture_commands

  • How to play previously DRM protected content in 3rd party iOS apps?

    I have a collection of tracks which I purchased from iTunes around 2008, which have the iTunes DRM protection. I would like to play these tracks through 3rd party iOS applications. Specifically, the applications "NuVo Player", "Sonos", and "Ambify", although this seems to apply to all 3rd party music apps.
    To remove the DRM from the files, I signed up for iTunes match. I enabled the service in iTunes, and let it scan my library. Once it was complete, I deleted the tracks which have DRM, and used the iTunes match service to re-download them. I used the Finder to inspect the new files, and verified that they are no longer protected. They are .m4a format, and are capable of being played by 3rd party applications in OS X.
    I then removed the protected files from my phone, and manually re-synced the new files to my phone. Even after doing this, they are unplayable by 3rd party iOS apps. Unsurprisingly, syncing this .m4a file to a new device (which never had the protected version) allows it to play.
    It seems that metadata of some kind may be retained on the iOS device. I suspect a full device restore would fix the problem, but I'm looking for a less intrusive solution.

    I found that restoring defaults on the device, followed by a restore from backup, allows this track to play in 3rd party apps.

  • I'm getting the iPhone5S and I know you can use the same Apple ID but I have to delete my details off my current phone, how can I keep my account so I can use it again on my new phone?

    When I sold my iPod I had to delete my apple account but I want to use this apple account on my soon to be new phone the iphone5S, I know you can use the same address but if I delete the account on my phone will I still be able to get it back on my new phone? And what about purchases and iBookstore? If I've purchased items will I be able to get them on my new device?

    Yes, you only have to make an icloud backup on your old phone and restore from that backup on your new phone. If everything goes well, you can safely restore your old phone.

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works.  Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port.  Does it need it's own power source, or will the USB port suffice?

    I have a MacBook Pro laptop purchased in June 2011, and the superdrive no longer works.  Rather than have it replaced, I'll buy a 3rd party superdrive that plugs into the USB port.  Does the external superdrive need it's own power source, or will the USB port provide enough power?

    The Apple external SuperDrive actually exceeds the allowed power draw. Because of this, it is only trouble-free on certain models that accommodate this excess.
    All others require an external Power source.

  • I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. What happened?

    I recently created a video in iMovie that I later uploaded to YT. I had a message from YT a day later saying that the music I used in my video was detected as 3rd party content. I used music found in the music and sound effect section. The artist is listed as Apple Inc. What happened?
    This is the message I received:
    Your video may include the following copyrighted content:
    Disputed claims 
    "Kadeem UIM-Trust Issues (Instrumental)", sound recording administered by:INgrooves Your dispute awaiting response by 12/08/12
    What does this mean?
    After your dispute has been submitted, your video will soon be available on YouTube without ads for third parties. This is a temporary status and might change at any time.Learn more about copyright on YouTube.

    This question comes up from time to time. YouTube and Facebook are both wrong.
    There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
    “You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
    http://images.apple.com/legal/sla/docs/ilife09.pdf
    You should this (also providing the above link) when following the dispute process with YouTube.

  • ITunes.  After installing new software, what does "restore iPod" mean?  Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?

    iTunes.  After backing iPod to computer and installing new software, what does "restore iPod" mean?  Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?

    You can restore your iPod to "New" which will erase every thing and install fresh iOS software or you can restore to a particular backup that you have previously created. In this case, your iPod Apps & data will appear as per the backup. Note that some content is not in a backup and will need to be synced back to the iPad from the iTunes music library or from, for example, the iPhoto photo library.

  • 1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

    1)
    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
    i. The list of the modules that are being managed by SAP Solution Manager(s)
    ii. The performance metrics of those modules/components at the high level
    iii. The information about Early Watch Alerts (or situations to watch for)
    2)
    Is there a full SNMP interface for getting the above information from SAP Solution Manager?
    3)
    Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
    4)
    Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

    Mugunthan
    Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
    One of them is
    ===========>>>
    Uploading snapshot to central instance failed, with 3 different messages
    Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
         at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
    please assist.
    regards
    girish

  • Changes Allowed on the 3rd Party Sales Order when PO is created

    Hello,
    We have a requirement to change the Sales Order even if the PO is already created for teh 3rd party order. I am not sure which fields and what changes can we do if the PO is already created for the 3rd Party sales order.
    Can you please guide me in pointing to the configuration or any user exit that we can control the field changes on the 3rd party sales order when teh PO is already created.
    Thank you!
    Chandrakant

    Venu,
    FIRST ANSWER THE BELOW TWO QUESTIONS.
    1. Did you understand what Shiva has mentioned?
    He has clearly mentioned that  you can change the PO qty and in standard it self the same PO changed  qty will be reflected in Sales order schduline lines qty, and he also mentioned that if this is not happening then advised to refer the Note 1361281.
    2. Did you read the note?
    It says that It will occur if the sales order line item is part of the delivery group or if you have set the complete delivery indicator for the sales order. And it also advised to apply the program code to over come the issue.
    Please note: before commenting others just check once in system then talk, don't just blindly through the ball, it will not have good results.
    Before also mentioned the same, but you still repeating the same.
    Sorry Moderators that i have mentioned some lines in the Note here.
    thanks,
    Srinu.

Maybe you are looking for

  • View with Bind Variable and ADF table

    Hi all, Please note what i have noticed. I created a view with a bind parameter, overriden the prepareSession of my Application Module to set the bind parameter and execute the query. I then created a simple jsf page and included the view as an adf r

  • How to recover a file saved in 5.0 to be used again in 4.x?

    after having upgraded to Maverick, i innocently upgraded Pages, excited abotu imporvements... alas what a mistake!  most of my docs are now useless because i cannot selec images for example.  thankfully my old 4.1 is still around but any doc i saved

  • Question about file sharing in the cloud

    I want to share my folder in the cloud with friends, currently I can only share some pictures and not a folder. In addition, I can't also upload any folder, is that because I am using trial?

  • CVI2013 f1: how to cancel build process?

    how to cancel the build process after it's started? I can't find a way... Vix In claris non fit interpretatio Using LV 2013 SP1 on Win 7 64bit Using LV 8.2.1 on WinXP SP3 Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded Using CVI 6.0 on Wi

  • Illustrator CS5 Update???? Error

    I am trying to update Illustrator CS5 but I continue to get an error message telling me that it has failed to update. Does anyone know how to remedy this?