HT5517 I cannot see my Apple TV.  I have 2 of them and can only see one.  Ideas?

I cannot see my Apple TV with airplay.  I have 2 of them and can only see one.  Ideas?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device.

Similar Messages

  • Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

  • HT1595 Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

    Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

    I just had this issue. Go into settings and reset the Apple TV after the firmware update. (note just "reset settings" and NOT back to factory settings)

  • TS2972 I have 46 movies downloaded from apple on my windows 7 PC I can only see 32 of them on my apple tv, I keep trying to share on my computer but they will not connect, any ideas?

    I have 46 movies downloaded from apple on my windows 7 PC I can only see 32 of them on my apple tv, I keep trying to share on my computer but they will not connect, any ideas? Sometimes I can connect though computer and get all my movies but usually I  can not connect though the network.

    thank you Diesel vdub  this helps but I just need to clarify - I understand about copying the intire folder ( cool thanks ) for the second part though, you are saying I can not do this if the 2nd computer does not have internet access? ( which you seem to be saying - bother! )
    many thanks
    Glenda

  • We have an iPhone 4S and can only see the top half of the screen.

    We have an iPhone 4s and can only see the top half of the screen.  The phone works fine as far as making calls and you can kind of text, if you can figure out where the keypad is.  Is there a fix for this or is it trash?  It is out of warranty and we don't have insurance on it.

    kdbeck88 wrote:
    a new phone is out of the question.
    Then I guess you'll have to live with a broken phone as a new one is your only option.

  • Making a slide show and can only see the top 1/4 of the bottem line of photos in the project.  help?

    I am working with beat markers and it was going along fine until suddenly everything went awry.  I dropped in a bunch of photos and the last photo assigned itself a time of over 3 minutes.  Beat markers are at less than 1 second.  I have removed the beat markers for the photos I want to remove, in order to try again.  When I try to delete the 3 minute picture the entire project loses its beat markers AND on top of all of that, I can only see the top 1/4 of the pics in the bottom line of the project.  I've tried several work arounds and can't fix this.  Anyone have suggestions?

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Start page starts correctly them elongates to the right of the screen and can only see part of the information displayed.

    It means that I am unable to read all the information being displayed,such as my email,I cannot log onto it with the password as it is off the screen where the whole page as moved to the right of the,it appears to stretched.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    See:
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How do we see which macs have cc installed on them, we can only see licences

    We are trying to see what macs have cc installed on them in admin console we only see the licences

    Yeah, OK, I can see an arbitary number for CPU used since session startup (what does that refer to by the way? It can't be percent), and I can see that one user has consumed massive amounts of CPU compared to all other sessions, but he is currently not running anything, so how can I see which SQL he ran in the past day that cuased all that CPU consumption? Can I do this without AWR?
    By the way, do you need a Diagnostic Pack license for simply viewing the Performance tab of dbconsole? I Can go into dbconsole and see history for 2 days back and see the massive espike that caused CPU consumption, but when dbconsole displays the list of top SQL and top sessions under the graph, is it the top listed SQL that consumed the most cpu or do you need to correlate the colours, i.e. find the SQL listed in top SQL that has the same colour as CPU usage on the graph (green) even if it is not listed as the top "consumer" (which I assume means top AAS consumer: overall consumption of all resources)?

  • When i connect my ipad2 to my computer it shows as a camera type connection and can only see the photos that I have on it. I want to download all the songs from my PC but the device is not showing up in itunes.

    My desktop computer only recognises my ipad as a camera type device so I am unable to download the music from my PC to my ipad.  Even when I go into itunes it does not recognise the ipad, however it does recognise my ipod.  How do a get my computer to see my ipad properly.  My PC runs on windows XP.

    Not sure if you have tried the following...
    http://support.apple.com/kb/TS1538
    This article has some good troubleshooting ideas. 

  • Screen is blurred and can only see in the bottom left corner

    Please help. I turned my nano on this morning and the screen appears to be blurred. I can see my lists and song information out of the bottom left corner of the screen. If I scroll through by memory, it does actually play the music. This leads me to believe that it is only something wrong with the screen. Has anyone had this happen before? Suggestions?

    Unfortunately, it's possible that your iPod's screen might be broken.
    In that case, you would have to get your iPod's screen replaced if you wanted the problem to be fixed.
    But before you do that, try restoring your iPod, as this might fix the issue, if it does not relate to the physical condition of the screen.
    For information on the restoring process, see this article:
    Restoring iPod to factory settings
    -Kylene

  • Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

    PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

    Hi stephaniec0103,
    Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
    Have you tried repairing Acrobat from the Help menu?
    Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
    You may download a 30-day free trial version of Acrobat from the below mentioned link:
    Download Adobe Acrobat free trial | Acrobat XI Professional
    Let me know how it goes.
    Regards,
    Anubha

  • My email messages in my inbox on my new Apple Mac Air have suddenly disappeared and I only have the ones from the last 6 days visible.  Help

    Hi
    About a month ago I bought a new Macair and it has been working very well.  It is synced with my ipad and my iphone.  Now all of a sudden, my email messages in my inbox have dissapeared if they are older then 6/7 days.  Can anyone help me get them back, does anyone know where they have gone?  I haven'tchangedany settings and can't find anything in Preferences that says to delete or remove them after so many days.

    Click here for information. If you can't get the answers emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
    (85326)

  • I want to see two bookmark toolbars, and can only get one to display.

    I have tried to add a toolbar, but it doesn't appear. I have reset my toolbar and tried again. no luck

    Try:
    *Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/

  • Where is "Structure" under Insert in Dreamweaver, I can only see "Layout"?

    Can anyone tell me why I cannot see the menu with Structure under Insert in Dreamweaver, and can only see one with Layout? Any help appreciated on this. I am trying to follow the  Dreamweaver tutorial "Make your first website", and am stuck on "Create the page structure" (Part 2)- as the drop down menus in the online tutorial are different to those on the Dreamweaver site that I can see on my Mac OS X 10.6.8
    The tutorial instructs to find Structure in Insert but I can only see a function labelled Layout.
    I managed to find a way of locating 'div' but there is not a Header in the drop down menu in Insert.
    There is a list of Spry options but these are quite different to the list given in the tutorial.
    Please can anyone help with pointing to where I can find the function to make a Header (as it is called in the tutorial).
    Thanks.

    Layout and Structure are the same tab (Category). Layout was renamed to Structure after CS6 if I'm not mistaken. See below:
    Layout - CS6
    Structure - 2014.1

  • I had 2 games of clash of clans on 1 game centre.  Now I can only see one?  How can I find the other one?

    My kids had 2 games of clash of clans on 1 game centre.  Now I can only see one?  How can I find the other one?
    My daughter set up a game centre on her ipad.  My son, on his ipad used the same game centre log in.  He then set up his own game of clash of clans.  After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad.  Both were using the Clash of Clans successfully on their own ipads using the same game centre log in. 
    One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
    Please let me know if this can be resolved.
    We wish to delete my daughters Clash of Clans - as she does not use it at all.  We would like to regain access to my sons. 
    My son can visit his Clash of Clans - his clan name is 'The Big Boys'  He has a shield that is blue with a yellow lightning from top right to bottom left.  His name is Fat Poo (I know ridiculous).
    If you can help us or advise us what to do we would make my son very happy
    thanks

    Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
    I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
    My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
    I haven't tried installing the latest beta. Maybe that would fix the problem.
    Toddo

Maybe you are looking for