HT5517 i could not set the airplay on my laptop

i have a apple tv but could not connet to my MAcpro..can you help me out plese

airplay mirror which well mirror the screen is not! supported by iphone4 and ipad1 only iphone4s and up and ipad2 and up support that

Similar Messages

WARNING:Could not set the asynch I/O limit

Every night database generate trace files with WARNING below
Does anybody knows what this mean?
WARNING:Could not set the asynch I/O limit to 252 for SQL direct I/O. It is set to 200
Oracle Version: 11.1.0.7
AIX 5.3

As I said read metalink note 783128.1 or 759060.1.
There is bug 7409110. Look at it, maybe there exists patch.

HT201335 Ive bought Apple TV and upgrade my macbook air Os X ver 10.8.2 but i could not see the airplay on the top menu bar . please help! thank you.

Ive bought Apple TV and upgrade my macbook air Os X ver 10.8.2 but i could not see the airplay on the top menu bar . please help! thank you.

The ability to use AirPlay is BOTH an OS requirement(Mountain Lion) AND has hardware requirements. You need to check and see if your 2010 Air will support Airplay.

DNS Set Up system throw as ORA-12154; TNS :could not resolve the connect id

Hi,
While i'm creating DNS set up system throws below message
unable to connect
SQLState=08004
DNS Set Up for instantclient(win32-10.2.0.4) system throw as ORA-12154; TNS :could not resolve the connect identified specified.
operationg system:xp
dir path:C:\Oracle\instantclient10_2
TNSNAMES.ORA(C:\Oracle\instantclient10_2\NetWork\ADMIN) Contants
YourTNSName =sankar
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT =1521))
(CONNECT_DATA =
(SID =sankar)
(SERVER = DEDICATED)
dir contains:
sqresus.dll,
sqresja.dll
sqoras32.dll
sqora32.dll
oraociei10.dll
oraocci10.dll
orannzsbb10.dll
ojdbc14.jar
ocijdbc10.dll
ociw32.dll
oci.dll
classes12.jar

user7197586 wrote:
Hi
I have been created one DBLink it's created but when i am trying to access the data through the link it's raise error as
"ORA-12154: TNS:could not resolve the connect identifier specified"
CREATE
PUBLIC DATABASE LINK
Vrd_tcplink
CONNECT TO
"SAPVRD"
IDENTIFIED BY
"manager123"
USING
'VRD_TCP.WORLD'
created this above dblink
Kindly Suggest to wau out.
Regards,
Sachin
When using a dblink, the database with the link is acting as a client to the remote database ... exactly like sqlplus running on the db server.
read: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ ora-12154tns-03505

WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1

Hi,
We have recently upgraded single instance database to 10.2.0.5 patch set 4 on windows server 2003 64 bit
After upgrading we are facing issue of number of warnings in trace files (bdump)
WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1
I know this is bug 9772888 and oracle suggest to upgrade to 11.2.x but we can't upgrade it now on early basis.
According to oracle it is useless warning and can be ignored but these traces are consuming more than 500MB space per day and we are unable to delete trace files as oracle countinously using those file for writting
it is production database kindly suggest solution other than upgrade.
trace files sid_sxxx_XXX.trc
if we set max_dump_file_size to XXXM or G will it resolve our problem?
or is there any way to flush warnings to new file and delete old one.
Please suggest
Thanks
shah

duplicate thread.
I suggest you don't multipost.
I also suggest you upgrade from Windows 2003 (10 years old and probably desupported)
and 10gR2 (desupported for a few years)
Sybrand Bakker
Senior Oracle DBA

Workflow Error Message: System Account - The Workflow could not set Content Approval Status

This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
When I start the work flow the following 3 error messages show up:
Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Thank you for your kind guidance.

Hi,
For the first error: Did you set Content Approval in the workflow? If so, see if you have it in the versioning settings of the list settings.
For the second error: double check your recipient is set up as being valid. Did you type in the email address or is it referring to a people picker field? also, make sure that in the workflow for the email that you actually populated it in the
To: field.
for the third error: I suspect that either your farm is not configured for email. Or, this error is a knock on from the second error. If you get the second error rectified it may clear this error. If not then double check the email settings
for your farm.
Johnathan Lightfoot

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

What are the Variables settings, what is the text file’s content, …?

Windows setup could not process the Catalog setting

Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
If I don't use any file installation is performed correctly.
Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
See setup log files under [X:\Windows\panther] for details."
However, when I check this folder in Windows Server there isn't any updated log file...
My unattend.xml file contains:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Type>Primary</Type>
<Size>25000</Size>
</CreatePartition>
<CreatePartition wcm:action="add">
<Order>2</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
<Extend>false</Extend>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Extend>true</Extend>
<Format>NTFS</Format>
<Label>Media</Label>
<Letter>D</Letter>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<WindowsDeploymentServices>
<Login>
<Credentials>
<Domain>*********</Domain>
<Username>Administrator</Username>
<Password>*********</Password>
</Credentials>
</Login>
<ImageSelection>
<InstallImage>
<ImageGroup>ImageGroup1</ImageGroup>
<ImageName>TCImage</ImageName>
<Filename>Install.wim</Filename>
</InstallImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Anyone know how to fix it?
Regards

Well, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
http://oi61.tinypic.com/sxkjt5.jpg
I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
Regards

How could I set the proxy settings for just some URLs and not for all?

Hello,
I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
I know that I can set the proxy settings in the system properties, and this works perfect.
But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
How could I set the proxy settings for just some URLs and not for all?
Thanks

java.net.URL.openConnection(java.net.Proxy proxy)
@since 1.5

DPM 2012 R2 UR4 - DPM could not set security permissions on the replica or recovery point volume that was created.

Hi All,
I am running a fresh install of SCDPM 2012 R2 with a protection group that is backing up the 'C:\', Bare Metal and System State of some VMs. If i add any additional servers to the group since the first creation it returns the following error:
Modify protection group: System State & Bare Metal Recovery failed:
Error 419: DPM could not set security permissions on the replica or recovery point volume that was created.
Error details: The process cannot access the file because it is being used by another process
Recommended action: Review the error details, take appropriate action and retry the operation.
If i re-create the whole protection group it works fine.
Could any one advise any further diagnostics I can do to try and locate the reason behind not being able to modify the group after the first creation? I can add new servers to other PGs without any issues.
Thanks in advance,
Dan

If you are protecting any of the system state/BMR protection. Can you stop protection by deleting the older recovery points and then recreate the protection group.
This thread mentions this to be a hardware issue, albeit with less information on what exact hardware issue:
https://social.technet.microsoft.com/Forums/en-US/480679c2-1079-4847-ab38-5cc8f454ef86/error-419-dpm-could-not-set-security-permissions-on-the-replica-or-recovery-point-volume-that-was?forum=dataprotectionmanager
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

Voice navigation is not available for the iPhone 4

HT1937 I've set a factory job and now I can not remember my mail and I could not activate the phone ..alrjae help me re- activate the phone and this zip to communicate with me *****

I've set a factory job and now I can not remember my mail and I could not activate the phone ..alrjae help me re- activate the phone and this zip to communicate with me ******
<Email Edited by Host>

Contact that someone else to have them delete their account.
The previous owner needs to do this:
Prepare your device to sell or give away
There is no workaround for Activation Lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515

TS1702 I could not find the software update in general settings to update my iphone 4.in the dir ections it was shown in guide under the about setting

I could not find the software update in general settings to update my iphone 4.in the directions under the ABOUT setting but not on my phone.so I cant add some apps without this update .Can you advise me how to fix this problem

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I had to set up a new email ID, because I no longer had access to my old email address and Adobe was forcing me to change password, but I could not access the verification email. Now I cannot read my books under my new ID, even though I got Adobe support

I had to set up a new email ID, because I no longer had access to my old email address and Adobe was forcing me to change password, but I could not access the verification email. Now I cannot read my books under my new ID, even though I got Adobe support to set up my new ID.

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

HT5517 i could not set the airplay on my laptop

Similar Messages

Maybe you are looking for