HT5517 is it possible to send audio out to remote airplay speakers at the same time using Atv wired(optical) speakers?

i like to listen to music in the living room and bedroom simultainiously from my home theater and a set of airtunes connected speakers using a mac mini.
Is this possible with an Apple TV/home theater/APxpress setup?
airport does show in Atv as a speaker option

Hi,
I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
Hope it helped!

Similar Messages

  • Is it possible to get 2-ch signals from TDS2012 oscilloscope at the same time with LabVIEW "7.0"?

    Hi, everyone.
    I've been trying to get the signals from 2-ch of Tektronix TDS2012 oscilloscope at the same time using IVI connection with LabVIEW "7.0"
    I've already searched this developer zone for the answer.
    I've tried the famous example: "IviScope - Acq Dual Wfm Edge Triggered.vi"
    and it gave me the error message like:
    Error -1074110451 occurred at IviScope Initialize With Options.vi
    Possible reason(s):
    Driver Status:  (Hex 0xBFFA600D) Primary Error: (Hex 0xBFFA600D) The Config Server module is not present on the system.
    I think I've installed all~ the required softwares for IVI. For example, ICP 2.2, IVI engine 2.0.46, and tktds1k2k ivi (instrument driver for tds2012, in fact this one is for LabVIEW "7.1"... :-P)
    TDS2012 and my computer is connected through HPIB(GPIB) and it is shown on the MAX (a GPIB instrument as well as an IVI hardware asset)
    I've tried GPIB connection but it gives me asynchronous signals...
    Is it possible to get 2 signals at the same time with LabVIEW 7.0(not 7.1 or higher) by any means?
    What in the earth is the "Config Server" in this case?
    I don't need to sticking to IVI and any method to achieve my goal will be welcome.
    Could anyone give me the hint for this problem, plz?

    I think your problem is that the instrument specific driver is version 7.1 and you are using the class driver with 7.0. You can create your own 7.0 driver by downloading the LabWindows driver and using the Import CVI Instrument Driver under the Tools>Instrumentation menu.
    Since you don't seem to have a good reason to use IVI, why don't you try the native LabVIEW driver at http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9139659CE034080020E748.... I believe you have all of the functions to setup each channel and then when you trigger the scope, both channels will be captured. You would then transfer each waveform separately. The data is always read sequentially but that's not important as long as both channels are triggered at the same time.

  • Is it possible to output to div monitor and s-video at the same time?

    I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

    This is not possible with a mini.

  • Is it possible to output multiple clips from a multitrack session, at the same time?

    I'm using Audition CC 2014.2
    on Windows 7 Pro x64
    I am trying to figure out how to output several clips from a multitrack session, at the same time.
    A session like this:
    Is it possible to output 5 files right now?
    I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
    I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
    This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
    Any ideas?

    They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
    Ahh ok, use markers?
    So, this sort of thing isn't possible in multitrack mode then?
    If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
    That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
    Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
    But, it seems like this functionality is currently missing.

  • Possible to be logged in on iPhone and computer at the same time?

    I use Beejive on my iPhone. And iChat on the iMac.
    I have checked allow multiple logins in iChat. But whenever I try to login say on the iPhone and iChat is open on the iMac, it tells me I'm logged into to two places and closes me out of one.
    Is it possible to be on both at the same time?
    Thanks

    JNo Problem.
    For the points
    7:56 PM Thursday; October 22, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • TS2972 I would like to share my iTunes libraries with my Apple TV from both my iMac and Macbook Pro, but I use the same iTunes account on both devices. Is it possible to link my Apple TV to both devices at the same time?

    I recently purchased an Apple TV, and I currently have it linked to my iMac with my iTunes account. I also have a newer MacBook Pro that has some different iTunes media on it than my iMac does, but they share iTunes accounts. Is it possible to link both devices at the same time, have access to media on both computers, and use the same iTunes account on both computers?? It seems Apple TV will only link to one iTunes account per computer, but can access multiple computers if different iTunes accounts are activated on those computers.

    You can share multiple libraries with the Apple TV, they don't even need to use the same iTunes account. Just make sure that you use the same ID for homesharing on all devices.

  • How can i send multiple videos and photos, via mail, at the same time?

    you allowed to send only one video or 10(+) photos via mail.
    but can you send both at the same time? so 10(+) photos and a video (or more than one) in one mail?
    because if my mom has birthday pictures or something like that. She likes to be able to send it directly from her iphone to every person she knows in just one mail.
    anyone any tips or tricks?

    Those restrictions are generally part of the email provider, not just the phone. Attachments are restricted due to size, bandwith use, etc. Trying to send that much information in an email attachment is even restricted on a computer. Sharing via photo sites is generally a better option for large amounts of pictures and large video files.

  • Is there a way I can stream video from my 2012 AirMac to the Apple TV using airplay and at the same time stream the audio to an air speaker?

    Is there a way stream video from a 2012 MacBook Air to a TV using Apple TV and at the same time steam the audio to an air speaker. Also the same question but using an ipad

    You can try one thing. Follow these steps:
    1. On your Mac, turn on AirPlay Mirroring and connect it to the Apple TV, so audio and video will stream from the Apple TV.
    2. Turn off the sound of the TV where you have connected the Apple TV.
    3. Then, make sure that you have turned on the AirPlay speakers. Then, open System Preferences > Sound > Output, and choose the external speakers, so sound will stream from these external speakers.
    This should work correctly

  • Is it possible to use Airport Express as a repeater and as an airplay device at the same time?

    Hi,
    I am using airplay with airport express stations in combination with conventional speakers for my home entertainment. Works great. Only thing is that I have a massive block of concrete in my flat. Is it possible to use one of my express stations as a repeater and at the same time as a streaming device for airplay? Thanks!

    Sure it works only with apple routers? Cause than I could stop trying.
    Yes, it's proprietary like everything else Apple. You could look at this:
    http://www.amazon.co.uk/dp/B006BBYXPA/?tag=hydra0b-21&hvadid=9550946469&ref=asc_ df_B006BBYXPA
    I have had great success installing these for BT Home Hubs and VM Superhubs.
    @JoeMY - If it is "joined" to the FritzBox then it won't work, it only works with Apple routers connected via Ethernet or as the main router.

  • Is it possible to have a german/american i tunes account at the same time?

    I have a german itunes account.  Is it possible to have an american itunes account at the same time?

    Not at the same time, but you can create two seperate Apple IDs.

  • Does Apple TV output audio via both HDMI and Toslink at the same time?

    I would like to know if Apple TV outputs audio via both the HDMI and Toslink ports AT THE SAME TIME... 
    Ideally, I want to use it in my main zone connected to my TV via HDMI and convert the Toslink signal to analog to be exported to Zone 2 on my receivers.  (My receiver - as do most - can only direct analog sources to Zones 2, 3, and 4)

    Hey Bob,
    I have this same issue.  I was wondering what model of toslink to analog adapter you went with and how well it works?
    Thanks!

  • With Airplay, is it possible to send audio, when mirroring, to Airplay-enabled speakers?

    When mirroring an iMac onto a TV using Airplay via Apple TV, is it possible to send the audio to Airplay enabled speakers instead of using the TV's speakers? This potentially means that one could have surround sound whilst mirroring the screen onto the TV.
    Thanks for any help in advance!

    If the speakers are airplay enabled then you can just set the audio output via the Apple TV settings

  • I want to set my system audio out to my Airplay speakers (through airport express)

    It seems like a simple feature to have.... system preferences>audio>main output then set it to AirPort Express, but no luck... any ideas on how to route system wide audio to Airplay? It would be totally ridiculous if this is not possible.

    Sending audio sources, other than iTunes, via AirPlay will require a third party solution. One of them is Airfoil by Rogue Amoeba. AirPlay starts it journey from iTunes. In turn, iTunes uses a QuickTime CODEC to convert the audio to a format for streaming to an AirPlay-enabled "speaker" (AirPort Express, Apple TV, or other manufacturer's device that is AirPlay-ready)

  • How do I send photos to multiple e-mail recipients at the same time

    Mac Mini, iphoto version 9.5.1.  I can send a set of the photos to one person.  However it will not allow me to send these photos if I put the addresses of all the people I want to send it to with the same message.

    See the response to your other post

  • I have an iPhone 5 on the Sprint Network.  My iMessaging seems to work when it wants to when sending a message to others on the Sprint Network.  I can send an iMessage to someone on Verizon during the same time and it works just fine?

    I have iPhone 5 on Sprint.  My husband is also on Sprint and my iMessage to him seems to work whenever it wants.  I can iMessage to friends who have Verizon at the exact same time I am trying to iMessage my husband and the iMessages will go to and from the Verizon friends just fine, but not to my husband.  With him its not even pretending to send our messages as iMessages.  The send bar isn't even blue to him.  To me this seems like an issue with the Sprint Network, but I wanted to see if anyone had had the same/simmilar issues and it ended up being the phone. 

    I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
    Are you sending these imessage while on wifi or cellular data?  Also your husband would need to be in a good coverage area.
    Usually when imessage is unavailable it will send it as a text.  Does your husband receive your imessage as a text?

Maybe you are looking for