HT5517 When sending a tv show or movie to my apple Tv, it starts, then freezes, the little "wheelie" things appears and then nothing. This is new and I've never had trouble before. Any ideas ?

As above, when sending a TV show or movie to my Apple TV, it starts, goes for a few seconds, freezes, the "wheel" appaears on the bottom and then stops. Any ideas ?
This is a recent development and has not happend previously.

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Similar Messages

Never had trouble before with my incoming mail but just now I get a messege saying the user name or password for verizon is incorrect on my iPad but is fine on my home computer what's wrong with my ipad

Never had trouble before with my incoming mail but just now getting messege that says the user name or password for verizon is incorrect yet my home computer is fine only have this od my iPad

I experienced same problem tonight and called Verizon technical support and they walked me through the settings on iPad. Took about 5 minutes. Basically it involved changing incoming.verizon.net to pop.verizon.net and changing outgoing.verizon.net to smtp.verizon.net. But it's worth the call to ensure other settings are OK. Evidently, change at Verizon was effective today!

TS3212 Just attempted to download current update of Itunes into my HP windows 7 computer. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714)

I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
"The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
Any advice very much appreciated.
Thank you
UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to
         update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Firefox always opens a new window when i click the icon on my task bar...this is new and I would like it to say in the same window How?

I have a firefox icon on my task bar. Before this latest install, I would click the icon and Firefox would come up directly. Now it opens another firefox window. I don't want this. How can I change it back?

Click on the spotlight icon in the top right of your screen (looks like a magnifying glass), type
Terminal
and press 'return'.
In the window that opens up, paste or type this exactly into the window
killall Finder; killall Dock
(that's case sensitive) and press 'return'.
You'll notice the Dock disappear for a second or two then return, as do any open Finder windows.
Test using Finder as normal. Same problem?

Won't Open link from email it gives me the option to open but does nothing when I click that open box. This is a new problem my phone never had trouble with this before.

When I try to open a link from an email it gives me a choice to open but when I choose open it won't! I used to be able to click right on a store or anything and it would open connect to the store. Very strange

Hi
It shows just 4 always as an option in the "open with" lsit. Also I haven't downloaded any apps for a while so why would it start now?
Do you know how I can estabilsh how many apps are counting toward this 10 and what they are?

I just reinstalled from my time machine backup and now it is asking me for a user id. I never had one before

As part of the hard drive recall for imacs i had my drive replaced.
i just reinstalled from my time machine backup and now it set up a user id, I never had one before. Of course I don't know the password and cannot get in.
Why? How do I get around it?

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected. Any idea on what could be causing this? No info anywhere!

I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected. Any idea on what could be causing this? I cannot find info anywhere!
Thanks for any help

If you have anti virus software installed, disable that.
Try turning off the Firewall in System Preferences > Security
iTunes: Advanced iTunes Store troubleshooting
It would help when you post to tell us which Mac OS X you have installed. Thank you !!

After trying to restore from time capsule, I get the following message when I try to access the folder "data." The folder "Data" can't be opened because you don't have permission to see its contents. Any ideas?

after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents." Any ideas?

Are you restoring from a TM backup??
Check the methods Pondini outlines to do restore.
Q14-17
http://pondini.org/TM/FAQ.html

I cloud gives me the following message when I try and log in "you can't log in because of a server error" any ideas?

I cloud gives me the following message when I try and log in "you can't log in because of a server error" any ideas?

Hi spillgar,
If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Regards,
- Brenden

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

:-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.

I cant get my youtube account to work on my new apple tv. States the account cant be used or the password and such is wrong. I noticed that after google bought youtube it all became complicated. Tried all trouble shooting, Any ideas?

States the account cant be used or the password and such is wrong. I noticed that after google bought youtube it all became complicated. Tried all trouble shooting, Any ideas?

That would indicate an issue with the local network, not internet. This can impact devices differently and will likely be more obvious on a streaming only device.
If you are on wifi try ethernet
Make sure DNS is set to auto (settings - general - network)
Go to istumbler, netstumbler or similar to get a report of the network, look for signal strength and noise.

I have changed my email address in iTunes and my password but when I want to purchase a movie on my Apple tv it still shows my old email addres?

I have changed my email address in iTunes and my password but when I want to purchase a movie on my Apple tv it still shows my old email address?

Hi katefromne,
You can reset all of your settings for the Apple TV, which includes your account information:
The information is on page 31 of the Apple TV User Guide
manuals.info.apple.com/en_US/apple_tv_3rd_gen_setup.pdf
You can reset all of the settings on your Apple TV to factory values.
Important: This requires you to reenter all of your network and account
information.
To reset all settings:
Choose Settings > General > Reset > Reset All Settings.
The following site will provide all of the information you need to know about your Apple ID:
Apple - Support - Apple ID
I hope this information helps ...
- Judy

When I go to watch a show or movie that I purchased, it will not load. The "loading" screen comes up but it just sits there. There is no problem with my internet connection.

When I go to watch a show or movie that I purchased, it will not load. The "loading" screen comes up but it just sits there. There is no problem with my internet connection.

Hi, did you resolve the 200453 error? I've got the same one and can find very little in the way of information to lead to resolving my issue

HT5517 When sending a tv show or movie to my apple Tv, it starts, then freezes, the little "wheelie" things appears and then nothing. This is new and I've never had trouble before. Any ideas ?

Similar Messages

Maybe you are looking for