HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length? It seems to me it is taking much longer than a 1m cord to recharge.

Axel,
I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
Rinse and repeat: did this 3 times. Then I found this analysis:
http://lkcl.net/reports/ssd_analysis.html
I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
- buy an Intel S3500!
- add commit=1 to my mount options in /etc/fstab
- edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
Just my two cents.
Andrea
Last edited by andreius (2013-12-29 16:51:04)

Similar Messages

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

Are there any known issue with the HP 3005pr USB 3 replicator ?

Hi,
I recently ordered an HP laptop Pavilion dv6t-7000 with Intel i7 and nVidia video. While the unit isn't due to arrve for about 2 weeks, I'm looking for a docking station/port replicator.
Are there any known issues with the HP 3005pr USB 3 replicator ? Does it fully support Win7 64 bit? I am also considering the Targa U3 unit, but I'd prefer HP if I can be assured that it works.
I'd like to be able to leave the laptop closed when at my desk so I can use an external keyboard, mouse, and monitor.
Does HP make this device or does a 3rd party make it for them?
I've read so many stories on various forums regarding these things.
Any suggestions from HP or others? I need to order something soon, but I don't want head aches when it arrives.
thanks,
Steve

This HP USB 3.0 Port Replicator fully supports with Windows 7 64-bit, if that is the one that you are talking about.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have a mac book pro mid 2011 and it overheats is there any known issue with this model

overheating issues
I have a mac book pro mid 2011 and it overheats is there any known issue with this model

Are you gaming or watching videos when the unit heats up? As your core temperatures rise, it's normal for the fans to speed up - but if you're not running any CPU/GPU intensive apps, it's not normal for your MBP to heat up or for the fans to run high. Download the free iStat Pro widget and either record or take a screen shot of your temps and fans speeds. Oh, and your MBP should not heat up just because you're using the power adapter.
Clinton

I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

I have a 13" macbook pro and an 11" macbook air. Is there any way to charge the battery on the air with the power supply of the macbook pro?

If the charging plug fits, use it.

After upgrading to 3.6.12 my browser is not opening pop-up windows and while closing the browser giving a message that some tabs are open and shall the same be closed? I have not encountered this problem with eralier version. Is there any known issues?

Some of my web pages open a new pop-up window for entering credentilas and display sensitive information. After upgrading t0 3.6.12 i found that firefos is not opening pop-up windows (earlier version allowed). When I close the browser, it gives a quit message saying there are unclosed tabs and windows of firefox. shall they be saved for next time start.
Also observed that the memory usage (from Task manager)is very high compared to earlier ones and the process is not closed even if I close the browser.

3.6.13 is also behaving similarly.

I tried to upgrade my IPad with IOS 6 and now I have an Apple icon with a blank downloading bar.

How can I get ITunes to recognize my IPad 2. I starting having issues after trying to upload my IPad with IOS 6. All I have now is the Apple icon and an empty downloading bar.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

Ignore. I figured it out:)

Why this Query is taking much longer time than expected?

Hi,
I need experts support on the below mentioned issue:
Why this Query is taking much longer time than expected? Sometimes I am getting connection timeout error. Is there any better way to achieve result in shortest time. Below, please find the DDL & DML:
DDL
BHDCollections
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BHDCollections](
[BHDCollectionid] [bigint] IDENTITY(1,1) NOT NULL,
[GroupMemberid] [int] NOT NULL,
[BHDDate] [datetime] NOT NULL,
[BHDShift] [varchar](10) NULL,
[SlipValue] [decimal](18, 3) NOT NULL,
[ProcessedValue] [decimal](18, 3) NOT NULL,
[BHDRemarks] [varchar](500) NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_BHDCollections] PRIMARY KEY CLUSTERED
[BHDCollectionid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
BHDCollectionsDet
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[BHDCollectionsDet](
[CollectionDetailid] [bigint] IDENTITY(1,1) NOT NULL,
[BHDCollectionid] [bigint] NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](18, 3) NOT NULL,
[Quantity] [int] NOT NULL,
CONSTRAINT [PK_BHDCollectionsDet] PRIMARY KEY CLUSTERED
[CollectionDetailid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Banks
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Banks](
[Bankid] [int] IDENTITY(1,1) NOT NULL,
[Bankname] [varchar](50) NOT NULL,
[Bankabbr] [varchar](50) NULL,
[BankContact] [varchar](50) NULL,
[BankTel] [varchar](25) NULL,
[BankFax] [varchar](25) NULL,
[BankEmail] [varchar](50) NULL,
[BankActive] [bit] NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_Banks] PRIMARY KEY CLUSTERED
[Bankid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
Groupmembers
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[GroupMembers](
[GroupMemberid] [int] IDENTITY(1,1) NOT NULL,
[Groupid] [int] NOT NULL,
[BAID] [int] NOT NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_GroupMembers] PRIMARY KEY CLUSTERED
[GroupMemberid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_BankAccounts] FOREIGN KEY([BAID])
REFERENCES [dbo].[BankAccounts] ([BAID])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_BankAccounts]
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_Groups] FOREIGN KEY([Groupid])
REFERENCES [dbo].[Groups] ([Groupid])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_Groups]
BankAccounts
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BankAccounts](
[BAID] [int] IDENTITY(1,1) NOT NULL,
[CustomerID] [int] NOT NULL,
[Locationid] [varchar](25) NOT NULL,
[Bankid] [int] NOT NULL,
[BankAccountNo] [varchar](50) NOT NULL,
CONSTRAINT [PK_BankAccounts] PRIMARY KEY CLUSTERED
[BAID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Banks] FOREIGN KEY([Bankid])
REFERENCES [dbo].[Banks] ([Bankid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Banks]
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Locations1] FOREIGN KEY([Locationid])
REFERENCES [dbo].[Locations] ([Locationid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Locations1]
Currency
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Currency](
[Currencyid] [int] IDENTITY(1,1) NOT NULL,
[CurrencyISOCode] [varchar](20) NOT NULL,
[CurrencyCountry] [varchar](50) NULL,
[Currency] [varchar](50) NULL,
CONSTRAINT [PK_Currency] PRIMARY KEY CLUSTERED
[Currencyid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
CurrencyDetails
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[CurrencyDetails](
[CurDenid] [int] IDENTITY(1,1) NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](15, 3) NOT NULL,
[DenominationType] [varchar](25) NOT NULL,
CONSTRAINT [PK_CurrencyDetails] PRIMARY KEY CLUSTERED
[CurDenid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
QUERY
WITH TEMP_TABLE AS
SELECT     0 AS COINS, BHDCollectionsDet.Quantity AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'Currency') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)
UNION ALL
SELECT     BHDCollectionsDet.Quantity AS COINS, 0 AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'COIN') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)),
TEMP_TABLE2 AS
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM TEMP_TABLE Group By CollectionDate,DSLIPS,Bankname
SELECT CollectionDate,Bankname,count(DSLIPS) AS DSLIPS,sum(BN) AS BN,sum(COINS) AS coins FROM TEMP_TABLE2 Group By CollectionDate,Bankname
HAVING COUNT(DSLIPS)<>0;

Without seeing an execution plan of the query it is hard to suggest something useful. Try insert the result of UNION ALL to the temporary table and then perform an aggregation on that table, not a CTE.
Just
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM
#tmp Group By CollectionDate,DSLIPS,Bankname
HAVING COUNT(DSLIPS)<>0;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

FCPX .0.7 taking much longer to export projects than .06

Hi
Like some others, I'm finding exporting projects both old and new taking much longer in .07 than .06. The work around seems to be using Compressor which I don't have. I also am not getting larger files in export just longer export times.
Any ideas on why this is happening and what can be done to fix?

1) Which codec are you exporting to ?
When exporting FCPx is "rendering" and thus accessing the CPUs core(s). Fcpx 10.0.7 had something fundamental change to it... Certain operations really sped up while others slowed down.
Perhaps this is what you are experiencing.
When you say slower.... Do you mean... Half as fast ?

What is the exact technical difference between "Lightning to USB Camera Adapter" and "Lightning to USB Cable"

Mainly I am interested in attaching the iPhone to a receiver (or car etc.) to play music.
Both the "Lightning to USB Cable" and the "Lightning to USB Camera Adapter" seem to do the trick. So what is the exact technical difference between the two items?
When connected to a receiver, is the iPhone the USB Master in both cases? Is the USB "Audio Device Class" standard used to transmit audio?

Thanks for all the answers! I think I should specify the use case much more clearly. Sorry for not having done this earlier.
Use Case 1:
When I connect the iPhone to the receiver I can use the Lightning to USB, because the receiver has a female type A, just like e.g. a PC or like the charger. So I would agree that the Receiver must be the USB host, and the iPhone the USB device. This works just fine in my case, with iPhone and iPad.
In this case, the audio goes from the device to the host, or "Audio-in".
Use Case 2:
A friend of mine has a small device that converts USB to Toslink. This thing has a female Mini USB Type A, which is typically used at the receiving side of a USB connection. This device can be connected e.g. to a Mac, and then the Mac can output audio via this device to receiver which accepts optical Toslink signals.
In this case, the audio goes from the host to the device, or "Audio-out".
It is this use case 2 that I am unsure about:
a) Can the Lightning to USB cable be used in this case (assuming that I find the necessary non-standard adapters to actually connect the USB ports)? This would mean that the iPhone can act as a USB host with the Lightning to USB cable.
b) I know that the Lightning to USB Camera Adapter does convert the iPad into an USB host, otherwise it could not read data from a camera. So could this adapter also be used to produce "Audio out" to a USB device that supports receiving music?
If yes, would this also work with an iPhone (as pointed out in another answer, the iPhone does nor support reading pictures from a camera)?

My MacBook Pro (purchased in 2011) is taking 10 minutes to boot-up. It's also taking much longer to open files. I have 650 GB out of 700 GB left on my machine so it's not that I've overloaded the memory. Is anyone else having this problem?

My MacBook Pro (purchased in 2011) is taking 10 minutes to boot-up. It's also taking much longer to open files. I have 650 GB out of 700 GB left on my machine so it's not that I've overloaded the memory. Is anyone else having this problem?

Look at this comprehensive trouble shooting document;
https://discussions.apple.com/docs/DOC-3353
I suggest that you start with SMC and PRAM resets.
Then a Safe Boot.
Ciao.

Recently my adobe is taking much longer to load PDF files that used to open immediately

recently my adobe is taking much longer to load PDF files that used to load almost instantly

Look at this comprehensive trouble shooting document;
https://discussions.apple.com/docs/DOC-3353
I suggest that you start with SMC and PRAM resets.
Then a Safe Boot.
Ciao.

Apple tv showing wire to connect to itunes via mini usb cable which i dont have?

apple tv showing wire to connect to itunes via mini usb cable which i dont have?

You need to get the cable to restore the ATV to factory settings, following the procedure here.
USB mini cables are available from many different sources; often even from local stores like CVS or Walgreens. They are inexpensive, as little as a few dollars online & around $5 from some local discount stores.

Incase Dual Car USB Charger with Lightning to USB Cable

Hi,
I just buy this item and it seems that the item is not working...
What can i do?
Incase Dual Car USB Charger with Lightning to USB Cable
$39.95
Yakir

jddj,
If the charger uses the firewire pins (even though it uses a USB cable) to charge in the car it won't charge the iPhone 3G.
The iPhone 3G supports charging and syncing over USB only, the original iPhone supported charging over firewire in addition.
Hope this helps,
Nathan C.

HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

Similar Messages

Maybe you are looking for