HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

Try Settings>iCloud>Storage & Backup>Change Storag Plan.  If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

Similar Messages

  • I keep getting the following message as a popup in ical when trying to use iCloud: The server responded with an error." when it does this, it doesn't allow me to close the popup, as there are no buttons anywhere to do so. I've tried force quit, restart.

    nothing seems to work. I was told iniitally that it was a server issue, but the status seems to show the servers are now working. This has been goingon for almost 2 days now. Anyone have a clue about how to fix this?

    nothing seems to work. I was told iniitally that it was a server issue, but the status seems to show the servers are now working. This has been goingon for almost 2 days now. Anyone have a clue about how to fix this?

  • How to choose the restore using icloud option after you have already gone past setting up your phone

    How do I choose the restore using icloud option after I have already gone past setting up my Iphone 5?

    You have to start over by going to Settings>General>Reset and tapping Erase All Content & Settings.  This will bring you back to the setup assistant screens.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How do you choose the scratch disk in lightroom 5.5

    how do you choose the scratch disk in lightroom 5.5

    You don't. There is no "scratch disc" in Lightroom. Please rephrase your question.

  • How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    How can I choose the movy language? I know several ones and enjoy watching the movies in the original one.

    If the film's description page says that it has different audio tracks then you should be able to select the language via the playback control : http://support.apple.com/kb/HT5562

  • FAQ: How do I choose the right sequence settings?

    In general, the settings of a sequence should match those of the primary footage type in the sequence. Though Premiere Pro can mix footage of various types in a sequence and compensate for differences in characteristics, performance and quality are maximized when such conversions are avoided.
    See this video for more information:
    How do I choose the right sequence settings?
    Also see these sections in Premiere Pro Help:
    Create a sequence
    Sequence presets and settings

    Sorry to say this - but you've got the wrong advice from Adobe.
    You were right in selecting the profile for Epson premium glossy paper - if that's what you are printing on.
    The magenta cast is most probably due to double color management, i.e. color management for your printer was not switched off. You did all the right moves , but still the color management for the printer was not switched off. This seems to be an Epson - Lightroom problem. You are about the fourth poster who has this problem with Lightroom and Epson printers. All of them said that they were sure that they had color management by the Epson printer switched off. There seems to be a hidden setting that prevails or is called by Lr.
    The magenta cast is typical for double color management.
    Read this - maybe it helps: http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html#display_calibration
    Don't miss the section on  "How to print images from Lightroom".
    I don't have an Epson printer so can't give you further insight on this. Except ...
    Disable - temporarily - all custom print profiles and templates that you may have created. Move them to a different folder where Lr does not find them. I cannot guarantee that this helps but if the problem persists it might be worth a try.
    One of the above mentioned posters said that the problem disappeared after disabling an old print preset that he had created for a prior version of Lr.

  • How can I choose the time in WRT54G

    Hi
    Problem:
    How can I choose the time in WRT54G?
    Data:
    WRT54G v5.1, firmware 1.0.9
    Thank you for your attention

    I don't think that you can actually "choose the time" on your router, that is, you cannot set it to an arbitrary time.  The router's clock is set from the internet.
    However, you can choose your "time zone" and whether or not to use "daylight saving time".  To do this, open your web browser and point it to address 192.168.1.1.  Enter your router password.  This will take you to your router's web setup page.  You can set the time zone on the bottom of this first page.  Then click "Save Settings".  Exit your browser.  When your router has internet access, it will set itself to the correct time.

  • How do I change the default software that opens when I click on a document?

    I'm not sure if this is the right neighborhood to post this question, but here goes. How do I change the default software that opens when I click on a document icon. I've been without MSWord for a long while, so all my word processing docs have been written in TextEdit, the stock mini-word processor that comes with OSX. Now I have MSWord and I no longer need TextEdit. Even more importantly, I'd like Word to automatically open when I click on a doc created in TextEdit. Adding ".doc" at the end doesn't do it. It's still refers to TextEdit to open the document.
    Any advice?
    Thanks,
    John

    Select a document of that type in the Finder, choose Get Info from the File menu, change the application under Open With, click on Change All, and confirm your action.
    (23558)

  • How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Cannu help me plz

    How can i get the small sircul contact pic when I receive or make calls instade of the full screen pic ?? Can u help me plz

    Settings you make in ACR for a Raw file are written to the separate XMP side car file. (The Camera Raw preferences has this set by default and to my opinion it should stay so, but the other option is to save them in a central database)
    However, opening the same file in ACR and make new adjustments the previous settings are overwritten by the new ones. You can save them separately but that would be a hell of a job. If you want to be on the safe side you should make a proper back up of the whole folder (be sure to have the XMP files included, by default those are hidden files in Bridge) before someone else starts playing with the settings. However, you can always go back to the default version using the option in the little menu icon next to the name op f the panel (first panel is Basic). click on the icon and from the provided menu choose 'Reset Camera Raw Defaults' to go back to the originals.
    I don't use jpeg in ACR very often but I believe ACR settings for jpeg and tiff are written in the XMP data in the file itself instead of a separate XMP file. You can revert to default or make new settings that also overwrite the older settings.
    Making adjustments in ACR shows the results in Bridge (it uses the XMP data for the preview) but to make it visible in other apps you also have to save them in Photoshop itself to make the changes persistent so that mail and print reflect your settings.
    So basically, let her play with the files and either chose the option to save the files (bottom left in ACR Window and choose the wanted provided options or open and save them in Photoshop to get the proper result. And if you want to be on the safe side let here use her own copies and keep the originals to your self.

  • How can I set the page that will open, when I open a new tab, to be the same as the homepage?

    How can I set the page that will open, when I open a new tab, to be the same as the homepage?
    An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
    In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
    thank you,
    Asaf Privman.

    You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
    You can look at one of these extensions:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
    * New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

  • Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

    Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

    Yes. Delete the Apps that were not Purchased using Your Apple ID.
    But a Restore as New is the way to go.

  • How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

    How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
    For example...
    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
    How do I change this?

    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
    To change the download direction, you must do so through your browser's Preferences.  If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums.  I do not use Safari.
    If using Firefox>Preferences>General>Save Files to:

  • How can i check the last location of iphone when it was on?

    I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
    the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
    plz plz help me

    it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
    i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

  • How do I get the function browser to appear when I types an = sign in a cell-The fn browser was working OK and then quit appearing---

    How do I get the function browser to appear when I type an = sign in a cell-The fn browser was working OK and then quit appearing---

    I just stumbled onto the answer---The format sidebar must be selected before the function sidebar will appear--Did not see this in the help section--maybe  just overlooked it--

Maybe you are looking for