HT5552 Help with a card that stop working
I don't know the reason, but the credit card (that expires on 2015) stop working.
Please help
<Email Edited by Host>
We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
What do you mean by 'stopped working', if you are getting an error message then what does it say ? Have you tried removing and re-entering the card's details ?
Similar Messages
-
Help with Canon MX870 - scanner stopped working
Hi,
I bought a Canon Pixma MX870 printer/scanner a month or so ago and it was working fine up till this week. I had installed the Canon software and ran the OS X Software updpate when setting it up.
All of a sudden last week I couldn't print. It kept saying the printer couldn't be found. So I downloaded the Apple Canon printer software and reinstalled it thinking it couldn't do any harm. The printer is working again. The scanner not so much. If I do manage to get it to work (either by using the scanner from System preference > Print/Fax > and choosing open scanner or by using the MP Navigator it typically now will only work 1 time. After that it says "scanner not found" and sometimes if I close and reopen the scanner from Print/Fax it says "trying to open scanner session".
I know the MX870 is connected to the network. The blue wifi light is lit, it shows in the router's list of connected devicies, it also shows in Safari's list of Bonjour Devices.
I need this machine to scan and play nice with OS X - I need to scan more than print.
I ran Disk Warrior, ran chrons to do maintenance and fix permissions etc. I tried deleting and re- adding the scanner. That didn't work and I had to restore it from backup.
Anyone have any ideas on what to do next?
Thank you.Marlinespike wrote:
However, I went to take a screenshot and something very weird happened. It popped up a dialog box where the scanner was checked as shown in your screenshot with an 80.????? IP address (the ? are because I don't recall)
The 80 number would have been the MX870 wifi network address - not the IP address. The scanner selector tool does not show the device IP address, only the network address.
...asking if "Canon IJ Network Scanner Selector 2" could accept incoming connections from the network and there was a 3rd choice listing the scanner as "Canon MX870 series_3DXXXXX (where I am putting in Xs because I suspect it is a serial number).
Based on this I would guess that the firewall is enabled on your Mac and the prompt is to add an exception to for the networked MX870 (and the X's are the last digits of the wifi network address shown in the selector tool) so that communication can flow between both devices. -
I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?
I'm not aware of any, not to say that there aren't any issues.
it may have nothing to do with ntpd, there are a lot of things running.
ntpd just happen to make the log entry at the same time as the panic.
I would check to see if there are any updates available for you system.
if this is the first time that this has happened. it may be (pick one):
cosmic rays
sun spots
the trilateral commission
if this happens more frequently and that traces look the same, then
there may be a real problem that needs to be looked into further. -
I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
Need a sound card that will work with my speak
i have the creative Digatal 5700 speakers and i need a card that will work with them using the digital DIN input. also dont have alot of money,and would like with the control panel on the front of the pc like the fatalty.
The <A href="
http://us.creative.com/products/product.asp?category=&subcategory=205&product=907"]Audigy 2 ZS Platinum[/url] should be able to fit your need.
Jason -
HP Pavilion DV7 1240us Express Card Slot Stopped Working
My express card slot stopped working.
The tech I was working with for the HP tuner card seems to think it is a driver or hardware issue.
Please see the email string below.
I tried all I know to get the slot to work, but I do not know which driver for it.
Please help me.
Thanks in advance.
Below are the emails.
Thanks, the problem is I do not know which driver it is.
I looked through the entire device manager tree, and do not know which driver controls the express slot, can you send me in the right direction?
I have an HP Pavilion DV& 1240us laptop.
Any direction would be greatly appreciated.
----- Original Message -----
[Personal Information Removed]
Sent: Monday, September 24, 2012 5:14 PM
Subject: RE: Ticket: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Without inserting another device into the slot the only thing I can think of is checking device manager for the drivers for that express slot and see if they are installed or reinstall the drivers.
If the device works on another laptop but continues to have problems on the first one then there must be something going on with the express slot on the first laptop.
Regards,
Jorge
[Personal Information Removed]
Please include previous correspondence when replying.
From: J[Personal Information Removed]
Sent: Friday, September 21, 2012 5:44 PM
To: [Personal Information Removed]
Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
No I do not, have you had this type of issue before?
Could it be missing or corrupt drivers?
Is there a way to test the slot without a device, checking drivers etc..
----- Original Message -----
[Personal Information Removed]
Sent: Friday, September 21, 2012 4:41 PM
Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Do you have another express card device that you can plug into the laptop in question and see if something malfunctioned on the slot possibly?
Regards,
Jorge [Personal Information Removed]
Please include previous correspondence when replying.
From: JrSonic [Personal Information Removed]
Sent: Friday, September 21, 2012 11:43 AM
To: [Personal Information Removed]
Cc: z1r1200cc
Subject: Re: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Yes it is connected directly, it does not even get recognized by device manager.
No default beep when plugging and unplugging.
IT USED TO WORK NO PROBLEM.
It will work in another laptop.
I am a tech by trade, so if I have to edit the registry, etc.. let me know.
Right now I am baffled, what can I do.
From: [Personal Information Removed]
Sent: Friday, September 21, 2012 10:01 AM
To: [Personal Information Removed]
Subject: RE: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 Ap p: wintv6 Country: usa
Hello,
Are you making sure to connect the 1500 directly into the express slot in the laptop and into a usb converter?
When it is plugged in does anything appear in device manager with a yellow mark next to it? Is it being listed under sound, video, game controllers at all?
Regards,
Jorge [Personal Information Removed]
Please include previous correspondence when replying.
From: Joe [Personal Information Removed]
Sent: Wednesday, September 19, 2012 7:18 PM
To: Danger1
Subject: [Personal Information Removed] Product: HVR-1500 (77xxx) OS: vista64 App: wintv6 Country: usa [senderbase]
Name: Joe
Email: [Personal Information Removed]
Product: HVR-1500 (77xxx)
Application: wintv6
OS: vista64
Country: usa
Problem description: My tuner stopped working,I used HWclear to no avail.
The tuner works in another laptop, so it is not the hardware.
Will not make the customary sound when plugged and unplugged.
I am very PC savy and tried all I know, driver reinstall etc..
Please help.
ThanksHey there,
Can you explain more on this issue? I see by the emails the Express card slot is not functioning. What you are using in the card slot? Is the the HP TV Tuner card? If so, do you have another express card handy so you could test to see if it was the card or the slot? If your missing the driver you will need to use the HP Recovery CD to reinstall the TV Tuner driver.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
i just updated my iphone_3, and my sim card has stopped working, i tried to restore and it kept coming back with erorr mrssage, what can i do
An iPhone 3G cannot be updated to 5.1.1; the last version supported is 4.2.1. So if you managed to get 5.1.1 on it through some means that bypasses Apple's protections you have wiped out your phone.
-
Satellite A205 - SD Card reader stopped working after Win 7 upgrade
Satellite A205-SP5818
I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
Any ideas of other drivers that might work, or any kind of other solution?
Thanks.Hi
Try to remove eh SD card controller from the device list.
Then reboot the unit.
After that windows will ask you for an driver.
You can download this driver:
[SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
You should unzip this package and has to point the driver files in this folder
This should helps to get the SD card reader working again -
HP Pavilion elite sd card reader stopped working
System -HP Pavilion Elite HPE Series 500z Product No XX091AV#ABA
Operating System - Windows7
The sd card reader stopped working. tried everything
No error messagesHello @rusty99nail,
I understand that your SD Card Reader is not working on your HP Pavilion Elite HPE-500z CTO Desktop PC. Has it ever worked? If so I suggest you follow the steps in the HP Support document: Using Microsoft System Restore (Windows 7) and roll your system back to a point in time where your SD Card Reader worked.
If it still does not work after the Microsoft System Restore I would like you to do a backup and recovery of your computer back to factory settings. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 7), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 7), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
I have a MacBook pro that stopped working - mother board issue?
I have a MacBook pro that stopped working. Was told the mother board is bad. However, it still turns on and makes the normal start-up noises, DVD works and ejects, etc. - only the screen is out. Does this sound like a mother board issue?
It is a 15" MacBook Pro purchased new in October 2007. It has a 2.2 GHz Intel Core 2 Due processor with 4MB shared level 2 cache, 2GB SDRAM, 120GB hard drive, and a NVIDIA GeForce 8600M GT with 128MB of GDDR3 SDRAM.
I read in another thread that there was a problem wiht NVIDIA video cards. Could this be the case with this computer? In the thread, the person indicated that NVIDIA was fixing these issues under warranty.
I was told by the Mac repair tech (not an Apple store) that the new motherboard would by $700 and not under warranty. -
What is the best ATI Radeon Card that will work in a mid 2012 12 core mac pro?
What is the high model # ati Radeon Graphics card that will work with my new mid year Mac Pro 2012 .. 12 core, If I use 2 cards can I have up to 6 screens operating
How much from Apple is a 5870 card? Can it be purchased for less somewhere else? Can it be used in conjunction with the stock 5770 card?
Thankyou
StuartOne or two Apple-firmware 5770 cards can be used simultaneousy in a Mac Pro. It requires ONE Aux power cord for each card.
ONE Apple-Firmware 5870 can be used in a Mac Pro, as it requires TWO Aux power cords, and that is all that are available.
Please tell us more about what you are trying to accomplish, and you will get more help. Readers do not want to have to write a book-length answer to your overly-vague query. -
Satellite A110-195 PSAB0E - sound card has stopped working
Hello,
My sound card has stopped working it was working fine but suddenly the sound quality started to faint and finally it stopped working i have tried the following methods:
Realtek is default audio
Control Panel/ Sound & Audio Devices/ Audio tab/ Sound Playback click on down arrow and check that the correct audio is selected. Typically the problem will be they something like "modem line 0 playback" might have been substituted for the proper audio device.( Didn't Worked)
Chipset Utility - install ( Did'n't Worked Aswell)
Start / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. (Worked) But First The Quality Was Not As It Was Before And Then Sound Card Stopped Working Again.
Try a System File Check
go to Run - type "sfc /scannow" No Success.
I have installed windows again but no success. :(
Here Is The Detailed Model No. Satellite A110-195
PSAB0E-00F00KAR
Windows XP Home Edition SP2No It Appears In Device Manager And In Control Panel.
This Method Worked But The Sound Level Was Not As Good As it Used To Be:
tart / Control Panel / Administrative Tools / Component Services / a separate window will open in left pane click Services(Local) from the tree / Scroll down to Windows Audio service / if the service is Disabled or Manual right click > select Properties > under Startup Type change to Automatic > click Apply / click Start > OK Reboot. -
Need help with video card for my dual 1.8 G5
Ok, I've spent the last hour and a half searching around and really haven't found what I was looking for, although, it's probably right under my nose and I'm a moron. Anyways, here goes...
I have a dual 1.8 G5 and I'd like to add an extra video card. From what I've read, the "stock" location for the video card is AGP, but all three of the other expansion slots are all PCI-X, is that correct? I also, thought I had read that a Radeon 9200 PCI or a Sonnet Sonata SD will work in the PCI-X slot, is that true for just those particular video cards or will any PCI card work? If that's not the case, does any body know what options I have? I've spent a lot of time lurking on these forums and you guys have helped tremendously in the past, so I thank you in advance for any help you guys can give.
AaronHi,
That G5 Mac will accommodate 66/33MHz Mac Edition PCI cards.
•The Sonnet Sonata is a 16MB VRAM card and will work in either a 33 or 66MHz slot, so it's okay. Slow, but okay.
•The ATI RADEON 9200 PRO 128MB MAC EDITION PCI card is a better choice because it has 128MB VRAM and is much faster. Unfortunately it's difficult to find new ones at the moment. There are several used ones on Fleabay right now for under $89.
•There are other PCI cards that will work too, like the ATI Radeon 7000 Mac Edition 32MB PCI model as seen on Fleabay as item # 200046086081. That's probably your cheapest choice.
Just make SURE you get a Mac Edition, a PC type will not work.
Adding another PCI card will have zero effect on graphic performance of the AGP video card. Each AGP or PCI slot stands alone, and will only affect the monitor it's attached to. PCI slots are much slower than AGP slots (8X slower) in G5's.
Regards,
Dave -
Is there a USB 3.0 card that will work in my 2009 Mac Pro running Yosemite?
Is there a USB 3.0 card that will work in my early 2009 Mac Pro running Yosemite?
As established in their compatibility chart, the MaxPower USB/Esata card is compatible with Osx 10.10 Yosemite.
http://eshop.macsales.com/shop/compatibility/OS_X_10.10_Yosemite
You may want to contact MacSales for further advice.
Maybe you are looking for
-
Excise Invoice generation during stock transfer
Hello All, For an excisable item it is a rule in indian localization whenever the goods leave the warehouse it has to carry a proper excise document. This is possible in case of a delivery. But how to manage this in case of stock transfer? When the e
-
It never had any problems before I upgraded to iOS6. Please help!
-
How do I set up a 3GS to use without sim as an ipod touch.
How do I set up a 3GS to use without sim as an ipod touch.
-
On Yahoo Groups, using Internet Explorer, one can use a clipboard function to post photos to messages. When using Firefox, the clipboard doesn't appear and you cannot post photos on group messages.
-
Why can't I read a .docx file?
I have an iPad running iOS 5.0.1 and I just received an email with a .docx attached. Whan I tap on it, it tries to open only to get a message that it can not read this kind of file. It can however read a .doc. What's up with that?