HT5556 I do not have access to send a photo of my card to complete your request

my $50.00 itunes card was rung up at CVS in Tiffin, Ohio as active case #592802145 as previously reported. You requested a photo of the card front and back. I do not have access to an iphone nor the ability to do this via my computer.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
You don't have access to a digital camera or a different type of phone with a camera on it so that you can take pictures and copy them to your computer ? If not the contact iTunes Support with your case number and let them know and see how they reply.

Similar Messages

Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.

I tried the recommendations for fixing this below:
Follow these steps to grant full permissions to the folder where the files are stored: 1. Right click on the folder on the external drive and click on
properties. 2. On the property window, click Security tab.
3. Now click on Edit and then click Add.
4. Now type everyone in the box and
click OK.
5. Then check Full control check box.
6. Click on Apply and then click OK.
You may also try the below mentioned steps:
1. Click on Start. 2. Go to Control Panel. 3. Select "SOUND". 4. Double click on speakers. 5. Click on advanced tab and then uncheck enable audio enhancements.
But then I received the error message that I don't have rights to edit and add. Why would this be? I am the administrator?
Thanks!

Hi,
Please first take ownership of the folder or files, then give yourself full control permission.
Learn How to Take or Assign Ownership of Files and Folders
http://technet.microsoft.com/en-us/magazine/ff404240.aspx
Yolanda Zhu
TechNet Community Support

You do not have access to the selected person's record

Dear All ,
Good day ..
I am facing problem in SSHR 11i as the next :
The manager self service Responsibility has customized security profile to view only poeple in the positsion hierarchy , i submitted request for next approvers ...
the next apporover are poeple from the (AME)(not in the positsion hierarchy) , so when the approver want to opend and update this notification , the next message is appearing :
The changes were not applied because You do not have access to the selected person's record. Please contact your Human Resources Adminstrator.
Can some one help plz ?
Regards
Edited by: user11444611 on May 11, 2010 2:15 AM

The manager self service Responsibility has customized security profile to view only poeple in the positsion hierarchy , i submitted request for next approvers ...
the next apporover are poeple from the (AME)(not in the positsion hierarchy) , so when the approver want to opend and update this notification , the next message is appearing :
The changes were not applied because You do not have access to the selected person's record. Please contact your Human Resources Adminstrator.
You can approve notifications from any responsibility. So for those persons you can assign a responsibility which has access to the records and from there they can open the notification.
You can attach this function to the menu of your new responsibility.
Advanced Workflow Worklist (WF_WORKLIST)

What do I do when my iCloud account is not the same as my Apple ID? And I do not have access to the e-mail address that the iCloud account is set-up under.

How do I get access to the iCloud account to remove/change it on my phone to match my Apple ID?
iPhone 4, trying to access iCloud
cannot remember password
do not have access to the e-mail that the iCloud account is created under
have an Apple ID, it is a different e-mail than the iCloud account.
Went to store and the person there tried a number of things. I tried all manners of possible passwords as well.
End game: Just want to have an iCloud account I can use on my iPhone.

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

Your account does not have access to the forums system.

Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?

Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

5.7.1 Client does not have permissions to send as this sender - NLB

Hi there- we have an application which sends out email notifications to a third party vendor. The vendor was previously using Exchange Server 2010 and they have recently migrated to Exchange Server 2013. They have also implemented NLB and have two Client
Access Servers configured.
Our application has been spitting out "SMTP 5.7.1 Client does not have permissions to send as this sender" errors ever since the vendor has implemented NLB. As our application uses the IP address of the Exchange Server, we have tried specifying
the IP address of both the Client Access Servers but that did not help. We then tried specifying the IP address of the NLB which did not make any difference either. The vendor has confirmed that anonymous relay has been enabled on the receive connectors of
both the Client Access Servers. I must add that our application sits on the vendor's server and the application and exchange servers are in the same domain. The "Send From" email address is an existing mailbox configured by the vendor.
Telnet from the App server to the NLB on port 25 has gone through without any dramas.
Is there anything else we would need to check to get this working?
Cheers

Hi
Ensure that an dedicated relay connector is created in new exchaneg 2013 server
assign the correct subnets and the ip address of the app server into the relay connector
Run the below command to grant anonymous permission on the relay connector
Get-ReceiveConnector "Anonymous Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"
Specify the ip address of the mailbox server in your app server since the transport core services resides on mailbox server and cas server acts as stateless proxy
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Client does not have permission to send as this sender

We have a CRM web application hosted on a server. When a user launches the site, the site provides facility to the customer to send the query into the system using the email. The website provides the filed for the customer to enter customer’s email ID. The
customer email address is used by the system to send the response back.
We are doing a new implementation for SMTP authentication for the emails send into the contact center using a public website. The flow of the system to use the SMTP authentication is:
Customer launches the website.
Customer chooses to send the his/her query using the email from the website.
Website asks for the customer’s address, so that the query can be
answered back to the provided email address say [email protected] .
We have an account configured on the MS-Exchange 2010 say [email protected]
So before sending the email the website system performs the SMTP Authentication using the credentials of [email protected]
Now the system creates the email MIME using the email address provided by the customer on the website i.e. say [email protected].
After successful SMTP authentication for the address [email protected] system starts sending the email.
Here we are facing the issue:
While sending the email if the customer’s address is also configured on the same exchange used by the system i.e. exchange on [email protected] is configured
then website system is able to relay or send the email.
If the customer’s address is not configured on the same exchange used by the system where [email protected] is configured then the system is not able to send the email it results into the error of: “Client
does not have permission to send as this sender [email protected].
In short if the website performs the SMTP authentication then it requires the FROM address configured on the same exchange used for the smtp authentication in the email MIME from address.
Configuration tries:
As suggested on various forums and at Microsoft tech group we tried following things but no success:
Checked the checkbox “Authenticated Users” selected “Accept any Sender”.
Created a new relay and given the IP of the machine hosting the website or trying to send the email
Run the command from the EMC “Exchange management console”
Add-AdPermission -Identity "Default Receive Connector" -User "NT AUTHORITY\Authenticated Users" -ExtendedRights ms-Exch-SMTP-Accept-Any-Sender.

You can create a new connector to which everything is permitted - eg New-ReceiveConnector -Name "Anonymous Relay" -Usage Custom -PermissionGroups AnonymousUsers -Bindings 10.2.3.4:25 -RemoteIpRanges 192.168.5.77

While deploying to another server from RM client using build definition i got below error "Package location does not exist or deployer user does not have access"

We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"

Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer. I can not turn off Keychain...it is awaiting authorization from the SMS on the telephone I do not have access to.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB. I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get. Can someone advise how to get rid of Keychain. Should I cancel my icloud account?

I appreciate your help.
Have reset the ipad, but that changed nothing. I can not turn off Keychain, iit remains "pending approval". Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there. But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
Oh well...computers are computers and it is impossible to cover 100% of the situations.
Keychain iss not the best app for someone who lives in 3 different countries.
Thanks

When i re-boot and try to re-open firefox,windows 7 error message says that i do not have access to the firefox file

problems started when firefox 3 auto updated to 4
when i booted up and tried double click on short cut it gave error message that i did not have access to file
I am running windows 7
shortcuts had gone to degraded state on screen
if i have to re-boot i have to re-download firefox
am now running firefox 5
when shutting down, the firefox shortcut icon flickers/shudders

SW,
I don't know what the problem is with your corrupt/unopenable document on CD. I wonder if you can display it with QuickLook.
Select the file in Finder and hit the Spacebar. If the file is displayed properly, you can capture it as an image with Grab.app or by Shift-Command-4, > drag capture box.
Not knowing the complexity of your document, it's difficult to say what you should do next. I'd submit the graphics to an OCR application and extract the text, to be used in reconstructing the original document.
Jerry

Is it possible to use an external drive to play movies on my iPhone 5? I am going on a long flight and only have a 16gb iPhone. I will not have access to wifi, so it would have to connect manually.

Is it possible to use an external drive to play movies on my iPhone 5? I am going on a long flight and only have a 16gb iPhone 5. I will not have access to wifi, so it would have to connect manually. I've heard of apps that connect to an external for this very purpose, but its via wifi.

http://www.seagate.com/external-hard-drives/portable-hard-drives/wireless/seagat e-satellite/
Use Google and you can find similar drives from other companies.

My boyfriend who has an iPhone 5 just had his phone stolen, he has an iCloud account with find my iPhone app downloaded but we do not have access to a computer only the safari on my iphone 4s, where do I need to go and what do I need to do to access his

My bitfriend who has an iPhone 5 just had his phone stolen, he has an iCloud account with find my iPhone app downloaded but we do not have access to a computer only the safari on my iphone 4s, where do I need to go and what do I need to do to access his

You need to download the free Find my iPhone application from the App Store.

My iphone was stolen and i need to wipe it out but i do not have access to itunes what do it do?

my iphone was stolen and i need to wipe it out but i do not have access to itunes what do it do?

Open www.icloud.com
Enter Your Apple ID and Passoword
Open Find my iPhone And select your device and pick an action.
1 Play alert
2 Lock phone
3 Earse Phone

Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i

Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i update my ios? thanks Matthijs

Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
If you have a PPC Mac you cannot sync your idevice without a newer computer. See the end of this post for options.
If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After installing run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
Options if you cannot upgrade: iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there. Backup your device directly to iCloud over a wireless connection. Photos can be downloaded from the Camera Roll using iPhoto or Image Capture.

HT5556 I do not have access to send a photo of my card to complete your request

Similar Messages

Maybe you are looking for