HT5621 So, Settings iTunes & Apple Store has the right Apple ID, but iCloud does not, and I cannot sign out of it or change it. Yes, every 5 seconds Apple wants me to sign into my iCloud account... Any tips?
Please help. Thanks.
fancyena wrote:
Same here. I cannot change my Apple ID ONLY in iCloud on my phone. Everywhere else is fine. I cannot turn off Find My iPhone and/or delete the iCloud account off the phone. This all happened because my phone died, I purchased a new one, and for some reason when I plugged it up the phone did not have the latest backup I did from my other phone. It took me to a backup from November which had the old Apple ID. The new Apple ID works on the Apple Store, iTunes, and everywhere else it is needed except for iCloud.
PLEASE Someone HELP
If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
Similar Messages
-
I changed ISP and used ms explorer to set up on to new ISP. Internet options has the new ISP address but Firefox does not pick it up and is still using the old ISP address. Can find no way to set firefox to new ISP address. How do I do it? edit
-> Tap ALT key or press F10 to show the Menu Bar
-> go to Tools Menu -> Options -> Advanced -> Network -> Connection section -> click '''Settings...''' button -> change these settings in accordance with Internet Options settings that work on MS Internet Explorer -> click OK
Check and tell if its working. -
WWhen I set up family sharing i did it with me as family organizer, but as my spouse is the organizer I had to leave the "family" I created and join his. But while setting it up an error occurred, and the screen went blank. Now I tried to join his family sharing again, and my phone keeps telling me I can't because accounts can only join families twice a year.
I Don't really want to wait 364 days from now, is there a way in which I can reset my accoint so I can join family sharing again?
Apple support doesn't have a solution for me yet!
KInd regardsThis morning I looked at my family sharing account again an IT WORKS NOW! Think Apple has done a reset to my account, though I'm not exactly sure why! So I hope it works for you guys as well!
-
I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay -
Hi everybody, do you know if an apple store or the assistance can unlock an iphone 4S ? and if it yes whats is the price ? Thanks
The only one who can unlock an iPhone is the carrier that is holding the contract on the phone.
Allan -
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
I have just downloaded a copy of Photoshop and Adobe Bridge CS4 onto a second laptop I recently purchased. However the font size of the menu bar/tool bars is extremely small. My other laptop also has a copy of CS4 but it does not have the extremely small font size. Could you please tell me how to increase the font size in the menu/tool bars?
You can't. Any version before Creative Cloud does not support high-DPI displays and that is just that. If you cannot adjust the system's screen resolution and so on, then there is nothing you can do.
Mylenium -
FCPX crashed and I reported it here. Tom Wolsky suggested I trash prefs, perform an fsck, reboot and redownload FCPX from the App store. The reboot was okay but Safari will not let me access the App Store to redownload FCP. I'm running 10.6.8 but the App Store icon is grayed out. I get a "Safari doesn't recognize addresses starting with macappstore."
How do I get to the App Store to get FCPX back? I'm using the Trial version now.How are you linking to the App Store from Safari? From this page?
http://www.apple.com/finalcutpro/trial/ -
I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!
Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I have recently downloaded itunes 10.3.5.1 for windows xp but its does not seem to open
Have you tried delting the download and downloading it again?
What happens when you "run" the download? -
Where do i find the serial No on a IMac 4.1 please? I have looked on the "about this Mac" but it does not have the serial No on it!
Until last July, the model identifier on every Intel Mac would tell you exact minimum and maximum expansion in terms of RAM, retail operating system, and any system specific required firmware updates, video and audio expansion capabilities, and patches for Wifi available. The serial number is only of consequence if you wish to date a Mac down to the week. This can help in determining system specific disks, available warranty, and exchange/repair program eligibility. Outside of that the year and month can usually be narrowed down to a six month period with model identifier alone on all except MacPros. So my question is, is it really that relevant for your needs?
-
internet Download Manager cannot integration with firefox4 its Look in the menus it works but it does not actually work
IDM may need to be updated to work with Firefox 4.0. You could contact them and make them aware of the problems you are having with their program.
-
Hello! I cannot download applications, when I try to do it the application says "waiting" but it does not continue downloading! Can someone help me????
Download only one application at a time.
Click all downloading applications until they all say "Paused". Then click one at a time, let it complete downloading, then click the next and repeat. -
my imac will not shut down cause it says my mail is open but it is not and i cannot open my mail from the bottom of the screen
Hi there, go in to the utilites of you applications folder and find "Mail" then go stop processes.
If you cannot find Mail then open mail up and follow the process as above.
Thanks an Appple Certified Mac Technician Trainee -
I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?
For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI
Maybe you are looking for
-
I have an ipod touch 5th generation 64g . Just bought a new laptop and authorised it to use itunes library. When i try and sync my ipod it says it can't do it because there isn't enough space on my ipod to hold everything in the itunes library. I alr
-
How to change the max number of member display in Target Group
Dear Experts, We are using 2007 CRM Marketing. When I search and open a Target Group it displays me maximum of 100 entries of members over 11 pages. how do I increase or decrease the max number. Appricate you help. Thanks, Shabbir Hussain
-
Why I am I having problems dragging transitions to the primary timeline?
Its an odd problem, when I start FCPX and edit, the transitions drag and drop fine to the primary timeline. However at some point during the edit, the drag and drops stop, I can get a skimmer over the transition but not the hand icon. If I try to ins
-
Hello all! this could be a stupid question but I have problem to use the crypto library (jar file) inside my j2me project (bouncycastle) So I'ha tried to add it using "properties" -> libraries but still seems to unaffect the compilation's process (ca
-
Add monitoring wizard gives error 'page could not be loaded'
Dear forum members, I use the Cisco USC management pack and i get this error. In the opsmgr eventviewer i don't see nothing at all.Does anybody have an idea to solve this? Kind regards, André