HT5622 How can I reset my passcode, which is different from my password?

Does anyone know if I can reset my passcode, which is different from my password? I would prefer not to reset to factory settings and lose my pictures and music.

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Recovery screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Similar Messages

  • I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password why i am resetimg my

    I lost my restrictions password and want to reset my ipod so i can put a new one on, when i try reset it it makes me put in my device password and restrictions password! How can i reset my ipod if i need the restrictions password which is why i am resetimg my. Ipod

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.   
    - If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
    How to reset forgotten Restrictions...: Apple Support Communities
    - How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

  • I have a situation where the administrator password is rejected when attempting a software update. I think this happened because of syncing a iPad to the iMac.  How can I reset the Software Update back to the administrator password?

    I have a situation where the administrator password is rejected when attempting a software update. I think this happened because of syncing an iPad to the iMac.  How can I reset the Software Update back to the administrator password?

    You can reset the password with the install disk.

  • How can i measure BAPI runtime which has called from JAVA

    Hi abapers
    how can i get run time for BAPI called from JAVA through JCO.
    i know that i can use SE30 from ABAP by executing from SAP.
    may be ST05 useful for me i did it but when display trace
    i am getting big list by seeing this list i am not able to find the runtime for that BAPI.
    please any one can explain
    reagdrs
    ramesh

    Hi Ramesh,
       Irrespective of whether the call is from an external system or within sap, the bapi will be executed in R/3 only.
    So, you can safely measure the runtime using se30 only.
    If it is taking more time when called from JCo , then you can be sure that the problem is not with SAP and is actually due to the JCo connectivity with R/3.
    Regards,
    Ravi

  • How can i check the file  which is upload from  the server

    when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with  the required condition .
    for example ,i want to upload the file which have the data whose type is pack, and it have three integer and  two decimal ,how can i check in my code.
    thanks,

    Hi Sichen,
    First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
    Thanks,
    Vinod.

  • How Can I Change One Page to Look Different From The Rest of My Pages?

    Hi, my website uses a CSS page with a dark background and white type. But I have one page I need to have a white background and light grey type on. I am not sure how to do this without it changing all of my site's look which I don't want to do. I only want to change one page to have a different look. How can I do this? I am new to CSS so please try to explain how I can do this in simple terms if you can. Thanks.

    There are 3 ways to use CSS.
    External style sheet: a separate physical file that contains all your site wide rules & to which your html documents are linked.
    http://alt-web.com/DEMOS/DW-Link-Stylesheet.shtml
    Embedded styles: page specific rules in the <head> section of code view.
    <head>
         <style type="text/css">
              page specific styles go here...
         </style>
    </head>
    Inline styles: CSS styles in the markup (mostly used for HTML emails and not on web sites).
         <p style="color:red">This paragraph has a red style.</p>
    In order of importance, inline styles override embedded styles.  Embedded styles override external styles. 
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How can i reset my passcode if I forgot it?

    I've forgotten my passcode for the restrictions on my ipad (first generation).
    I tried numerous options, and was hoping that I would receive a link in an e-mail to reset it, but this isn't the case.
    I am now frustrated beyond belief, and am ready to give up!
    Any help would be greatly appreciated, thank you.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New

  • How can i reset my **passcode** if i didn't remember

    i dont remember my passcode so i cant go in my iphone....
    and i wonder if there Something i can do to Change it....
    or Reset all my Iphone
    thanks.

    Click here and follow the instructions.
    (87434)

  • HT4113 My daughter put a passcode on my iphone and now it disabled and wants me to connect to itunes. I did that but i am not at my home with my computer. How can I reset this passcode?

    My daughter put a passcode on my iphone and now it is disabled. I am not at home where my computer is. I tried itunes already. Anything I can do?

    You can only do it via iTunes. You'll have to force it into recovery mode.

  • How can I reset my passcode, when I dont have the original code?

    My nieces were playing with Siri/phone and accidently set up a passcode on my phone, I can't unlock or open etc. Apple is no help at this moment.
    Tried troubleshooting with iTunes, but an error message states the iPhone can not be syncked because passcode is locked.,

    The easiest solution and apparently the only approved solution via Apple (although a pain if you haven't backed up your device) to restore the phone if you can't figure out the passcode. It will erase everything but if you have a fairly recent backup then you will be fine...you may only lose anything that was added after the last backup. You can also try searching the Apple Support pages and forum to see if there is another solution. Ultimately, it's a plus to a certain degree that there is no easy way to change the passcode....if someone "found" it and wanted to try to get in to it....but it's a pain when it's a situation like yours.
    .https://discussions.apple.com/thread/3750135?start=0&tstart=0
    http://support.apple.com/kb/HT4113#
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf pg 165

  • How can I reset the passcode on my iPad, if I can't remember it?

    Just recently, I found out that the websites I usually access won't let my go on because I need a restriction passcode. I myself don't ever remember placing a restriction passcode. I have found many reviews about back up but sadly, my only product is a iPad 2, please help!

    Restore to Factory Default
    http://support.apple.com/kb/HT1414

  • I delete the internet sharing from my i phone 5.  how can i reset, i delete the internet sharing from my i phone 5.  how can i reset

    can you help me  becaus i need this to much
    the internet sharin

    Hello lulait,
    Check out this article named iOS: Troubleshooting Personal Hotspot found here http://support.apple.com/kb/ts2756
    Basic troubleshooting
    Confirm that your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
    Verify that Personal Hotspot is enabled by tapping Settings > General > Cellular > Personal Hotspot.
    Verify the Internet connection on your iOS device by tapping Safari and loading a new webpage.
    If one connection type doesn't work, try another (for example, instead of connecting using Wi-Fi, try using USB or Bluetooth).
    Try disabling and reenabling Personal Hotspot from Settings > Personal Hotspot or Settings > General > Cellular > Personal Hotspot.
    Install the latest version of iOS. Tap Settings > General > Software Update.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    If none of the previous steps resolves your issue, restore the iPhone.
    If you are still experiencing issues, continue with the following troubleshooting steps.Collapse All Sections | Expand All Sections
    Wi-Fi troubleshooting
    If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try the following:
    Turn Personal Hotspot off.
    Verify Wi-Fi is on in Settings > Wi-Fi.
    Turn Personal Hotspot back on.
    If another device is unable to join your Wi-Fi network, ensure that the user enters the Wi-Fi password correctly. If the device cannot see your Wi-Fi network, verify your device name.
    Note: Windows may not properly display a device name that uses non-ASCII characters.
    Verify how many devices are currently using your Personal Hotspot. Depending on your wireless carrier and, the maximum number of Wi-Fi connections may be limited to three at one time.
    If the other device still cannot connect, try turning Wi-Fi off and on again on the device. Verify that your device can see other Wi-Fi networks.
    Note: If you see an "Unable to Join" or timeout error when trying to connect a device using Wi-Fi, ensure that you remain on the Personal Hotspot screen until the first device connects. After a device has connected, you can leave the Personal Hotspot screen and use your phone normally. Your device will automatically stop broadcasting using Wi-Fi if you put your device to sleep or after 90 seconds elapse with no devices connected using Wi-Fi. You can start broadcasting your Wi-Fi network again by tapping Settings > Personal Hotspot.
    All the best,
    Sterling

  • How can i reset another page when call it from a page

    I use JDeveloper 10.3 to develop my application. And I want to reset value of UI component (inputtex, selectInputDate . . .) of a page when i call it from another page.
    Thanks!

    You can execute a method in "backing bean/Application module" on page load which can set the value of the UI components. Following link can help you to
    [http://kohlivikram.blogspot.com/2008/10/call-method-on-page-load-in-adf.html|http://kohlivikram.blogspot.com/2008/10/call-method-on-page-load-in-adf.html] .
    ~Vikram

  • How can I restore a contact which was deleted from Contacts?

    I opened Contacts on OS X 10.9.1.  I noticed there was a duplicate contact.  I deleted the duplicate, then added some information to the remaining copy of the contact.  I closed contacts.  When I returned a few minutes later, the remaining copy was also gone, now I would like to restore it, but there is no information on how to do that.
    Thanks

    What if it was synced - either to iCloud or iTunes (I'm not sure which one I backed up to) after the video was taken? How do I recover it? I have synced/backed-up my iPhone 4 since the video was deleted from my device. Is it still recoverable? Thanks.

  • How can I recover a video which was deleted from the iPhone 4?  It was not synced before deletion.

    iPhone 4
    Not synced, deleted a video from the phone.
    Is there a way to recover the video?

    What if it was synced - either to iCloud or iTunes (I'm not sure which one I backed up to) after the video was taken? How do I recover it? I have synced/backed-up my iPhone 4 since the video was deleted from my device. Is it still recoverable? Thanks.

Maybe you are looking for